Can you make plate holder for 2024 hussqvarna fe 501
- 0 Mi piace
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇸🇪 Paese dell'utente: Svezia
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Scrivi il tuo messaggio:
17 commenti
Sadly I don't have the measurements
- 0 Mi piace
Hallo ist der HUSQVARNA 701/ KTM 690/ GASGAS 700 FERSENSCHÜTZER passend für KTM smcr 690 2022?
- 0 Mi piace
Yes it will fit to my knowledge
- 0 Mi piace
Buenas cres que podras hacer molde de la tapa del lado del motor del embrague grande para la 701 ?
- 0 Mi piace
I have started making one but it is hard so it will take some time.
- 0 Mi piace
Hey @superMax3D I have one questions. Are you able to change the name on Husqvarna or is it possible to change it by my self.
- 0 Mi piace
Do you mean on the plateholder?
- 0 Mi piace
No i mean magneto cover where is name Derbi change on Husqvarna?
- 0 Mi piace
Hey @superMax3D the file does not fit. The spacing on the holes where the bracket mounts to the inner fender are too wide. The holes don't line up and the outer edge of the bracket it's too wide to fit between the subframe/fender. The rest of the holes, like for the taillight are correct so i know its not a scale issue. 23' FE 501
- 0 Mi piace
Weird, because I have tested it on a personal bike and it fits without a problem. Are you sure it has printed correctly and not had a layer shift during print?
- 0 Mi piace
The print came out looking perfect besides that dimension, I can email you pictures if you'd like. I used PLA 100% infill just to test fit before i use another filament.
- 0 Mi piace
The thing is I have tested it personally and sold a couple and no one has had a issue. I have it hard to believe that the design is faulty.
- 0 Mi piace
Hello, do you have license plate holder for ktm exc-f 350 2025 please. Thank u
- 0 Mi piace
Or could you make it if u dont have it please 😁
- 0 Mi piace
Sadly I don't
- 0 Mi piace
Is it possible to you to make one ? :(
- 0 Mi piace
I can but I don't have the measurements.
- 0 Mi piace
And is it possible if i somehow write u them i mean if u say wich and how the measurements u need exactly.
- 0 Mi piace
Yes it's possible but i need measurements and an idea of what it should look like.
- 0 Mi piace
Okay ill try my best and measure it with some pictures is it possible to send you email or something
- 0 Mi piace
Ok i have the measurements where can i send them to you.
- 0 Mi piace
You can send to max.anell@skola.botkyrka.se and some pictures and I can try to make one in a couple of days. I need distance and hole sizes and the measurements of the oem rear light.
- 0 Mi piace
Ok i’ll do that🫡
- 0 Mi piace
I did send u the pictures on your email if you can reply to me
- 0 Mi piace
hey bro the data doesnt work
- 0 Mi piace
What do you mean? Don't the stl file work?
- 0 Mi piace
Hi, wondering what the dimensions are for the KTM 08-11 license plate holder, will it work to print in a flashforge finder? Maximum 150x150x150mm. Thanks
- 0 Mi piace
It's about 180mm wide, If you put it diagonally it will probably work.
- 0 Mi piace
Awesome, Will try!
- 0 Mi piace
How much filament does this take?
- 0 Mi piace
Can't see which model you have commented on. Can you specify which one?
- 0 Mi piace
Do you have a plate holder for the 2024 fe 450 Husqvarna model?
- 0 Mi piace
Sadly I don't have it.
- 0 Mi piace
License plate holder does not say it requires supports. Bambulab will not print it..
- 0 Mi piace
Just enable supports in bambulab studio. I recommend tree supports.
- 0 Mi piace
Hello! I would like to know if in the husquvarna mirror cap and in the protectors of the heels it would be possible to replace the logo with the G of gasgas, thank you very much !!!
- 0 Mi piace
hey brother is it possible to have the file for the husquarna 701 clutch lever cover.. thanks
- 0 Mi piace
Hey Bro, you have plate holder for 2007 EXC525?
- 0 Mi piace
Sadly I don't have it.
- 0 Mi piace
Can you do it?
- 0 Mi piace
I don't have any measurements and I can't test it so sadly no.
- 0 Mi piace
I was just wondering if the Husqvarna 2017-2019 Plate holder also is compatible with the ktm exc 2017-2019 bike.
- 0 Mi piace
Hi! No it doesn't fit. The husqvarna and ktm has diffrent subframes but I have a model which fits the ktm 2017 - 19 which i can put out but i don't have any photos.
- 0 Mi piace
That would be really nice of you, i could send you photos after i put it on to you would like to.
- 1 Mi piace
I would like that! Now I have put out the model!
- 0 Mi piace
Do you have discord or anywhere i could contact you?
- 0 Mi piace
You can send a mail to max.anell@skola.botkyrka.se
- 0 Mi piace
Hey ich hab gesehen das du bei dein 701 die Pfersen Schutz in Carbo gedruckt wie würde das funktionieren
- 0 Mi piace
Hey! It's printed on a carbon fiber textured bed to get the carbon look. So it's not real carbon fiber but petg with a carbon texture. You can find these textured beds for your printer on aliexpress or amazon.
- 1 Mi piace
hey uh, is your 2012-2016 plate holder drop in? will i need anything else? I bought it, and trying to find someone to print it for me, as i am pretty, "not smart".