/https://fbi.cults3d.com/uploads/user/avatar/42370829/sts3dpic.png "STS3D")
/https://fbi.cults3d.com/uploads/user/avatar/34969582/20772681-7cbb-43e3-b96c-502197422a49.png "RJ_FigureForge")
hi, iwant ask a question for the "Elder Futhark Rune Stones". Can you make them inverted, so we could use the runes for stamps or to use it as graving tool?
- 1 Mi piace
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇺🇸 Paese dell'utente: Stati Uniti
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Scrivi il tuo messaggio:
4 commenti
That's a great idea! I have posted the Rune Stamps. Here's 10% off all my designs as a thank you with code: THANKS10
- 0 Mi piace
/https://fbi.cults3d.com/uploads/user/avatar/14420148/LOGO_DEVIS_CARRE_HD.jpg "Pix0pat"){kind=logo}
Thank you for downloading! ✨
I hope you have a great time with this model!
🎁 As a thank you, enjoy 10% off all my creations with the code: THANKS10 🎁
See you soon for more unique designs! 🔥
Pix0pat
- 1 Mi piace
Hello,
I would like to ask how are you installing the numbers on the wall? Because there is no adapter to screw and then mount the number.
Thanks!
- 1 Mi piace
Hello and thank you very much for purchasing the house numbers! Here is the method I recommend:
Steps
1. Make a small pencil mark at each mounting point on the wall, making sure it lines up with the house number support points.
2. Screw a hole in the wall at the pencil marks and insert a wall anchor at each mounting point, then a dowel screw into each wall anchor.
3. Before you place the house numbers on the screws, place a drop of two part epoxy glue on the end of the screw to secure the house number to the screws.
Materials
These will vary based on
- where you're mounting the house numbers
- where you are in the world
- the size that you've printed the house numbers
- the material you printed them with
So please take all that into consideration and use your best judgement about the details here :)
- Headless dowel screws. If you printed the STL file without changing the size, a #10 screw (3/16 in wide) or thinner should work.
- Wall anchors that fit the dowel screws.
- Two part epoxy glue. 4.Screwdriver and a bit that matches the wall anchor.
- Pencil or something to mark with.
- Optional: Dowel screws can be a little tricky to turn since they don't have a head, so pliers with teeth might be helpful.
- 0 Mi piace
It tells me the file is corrupted. When I try to slice it the plate stays empty.
Hi Parkerlouisa, I wasn't able to find an error on my end, but I have re-uploaded the 0 file. You should get an email from Cults3D to download the new, updated file.