Greetings, I purchased the download of the birdhouse. Not sure if I'm doing something wrong. Is this suitable for a P1S? The Home stl appears too big for my printer. Thank you.
- 0 Mi piace
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇨🇦 Paese dell'utente: Canada
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Scrivi il tuo messaggio:
35 commenti
Hi,
I have to write here according to the cults-support: I have now tested the product (https://cults3d.com/de/modell-3d/frech/cyclone-water-masturbator-no-support) and am completely dissatisfied. I don't feel any stimulation whatsoever; the water simply flows into the object and out again at the bottom without providing the slightest satisfaction. I find this very frustrating, as I not only spent around €12 on the print file, but also an additional €40 on the print, which has now turned out to be a complete waste of money. I also don't think I'm using the product incorrectly; screw the shower hose onto the thread and turn on the water. Unfortunately, there is no effect at all! Because of this problem I demand a refund! P.S.: I have already sent you an e-mail.
- 0 Mi piace
Hi TIGER,
There’s no universal guarantee of satisfaction when it comes to personal products. A toy that works well for one person may not have the same effect on another — it all comes down to individual sensitivity and personal preference.
If one toy could satisfy everyone, we’d only need a single product on the market. Instead, we have a multi-million dollar industry offering thousands of different options for a reason.
I hope this helps clear up the confusion.
Best regards,
- 0 Mi piace
Hello, I was wondering what size thread you used for the multihead cyclone. Is it an M52x4 ISO Metric thread?
- 0 Mi piace
all of the threads design independently which means it may not be compatible with ISO metric treads.
- 0 Mi piace
Hello MrsTiridi! Just tried to go to your website to check out your other models and at appears to be down!
- 0 Mi piace
We won’t be operating on that site any longer. Thank you for your interest
- 0 Mi piace
Hello, I am considering making one of your multi-head cyclones. Do you have any information about the differences in efficiencies, particle sizes captured, etc. between the 7, 26 and 48 head versions?
Also, is it possible to get parametric models so they can be scaled up for larger hoses, etc.
- 0 Mi piace
Hi pal. The smaller the cyclone faster air spins thus capture even smaller particles.
- 0 Mi piace
Thank you for the reply. I understand about the relative size, but do have any data on particle size? What about my question about a parametric model or the ability to allow for larger hoses.
- 0 Mi piace
Hi there! Given the differences in accuracy among 3D models, it is quite challenging to conduct research on this topic.
- 0 Mi piace
Hello!
Can you give me a head file for 7 cyclons? I bought a circuit for 48 cyclones on cults3d.com, the filter itself for 48 cyclones does not capture small sawdust well, it is all not in the filter but in the vacuum cleaner, can you give me the file itself for the head for 7 cyclones?
- 0 Mi piace
Pm me on mehmetyapman@gmail.com
- 0 Mi piace
What are the 8 holes in the porch for on the birdhouse? They are under the porch rails but they don't have anything to snap in the holes?
- 0 Mi piace
Hi there, Please disregards it as it is not needed with latest revisions.
- 0 Mi piace
Thanks
- 0 Mi piace
Got it! Thanks
- 0 Mi piace
Do you ever have sales or discounts on the bird house?
- 0 Mi piace
I asked a while back and you offered the discount but I never seen it until now. Will it be a code or just changed on item if given?
- 0 Mi piace
Certainly Nice try! But MrsTiridi never gave any discount past many years.
- 0 Mi piace
Why would I lie? Maybe scroll down to 5th comment to see where he replied about the discount !!
- 0 Mi piace
Check jolly3d.com ;)
- 0 Mi piace
Can you tell me what colors were you used on your bird house? was it paint or a filament color?
- 0 Mi piace
Hello! I'm getting ready to print the cyclone and wondering what the best orientation for printing is and what type of supports you use for the overhangs? I was also wondering what the purpose of those three overhangs are and if I could remove them. Thank you!
- 0 Mi piace
I upload suggested orientation as I can not upload in this comment section. please check on product page.
- 1 Mi piace
What is the scale to use door generating the printerfile ?
- 0 Mi piace
Hi friend. I am not sure about your question. Can you elaborate more on it?
- 0 Mi piace
May I ask what the two parts air flow top and air flow in your Tremblr-Venus 2000 strap adapter (Hands free) kit are used for?
Thanks
- 0 Mi piace
Hi there, Those are used for stopping rubber sleeve gets into airflow hole. With this no matter how close your rubber sleeve get close to hole will not be sucked into it. Happy Printing
- 0 Mi piace
Do you ever have sales or discounts on the bird house? Either way it looks amazing! Has all the problems in the comments been repaired?
- 0 Mi piace
Hi friend. I checked the files and nothing missing as mentioned in the comments. I ll give some discount for today. Happy printing !
- 0 Mi piace
Hi how are you ?
First really nice design here.
My question would be, if you had to chose one between this 2:
VORTEX WATER MASTURBATOR FOR MEN
And SHOWER JET PENIS BLOWER
Which one would it be? And why ?
Thank you
- 0 Mi piace
Hi Friend, both model is function quiet differently, if you would like hard pressure vortex is way to go, or more flow sensation then you may go with jet. Hope this clarify. Happy printing !
- 0 Mi piace
Item A(5) is printed with supports ?
- 0 Mi piace
7 cyclone
- 0 Mi piace
Hi there friend. Check your printer size and compare with my files specification. happy friend
- 0 Mi piace
Hello friend! How to place supports on the head of the 48 cyclone ?
- 0 Mi piace
Hello there. File 48 can be print3d upside down with any support of your choice
- 0 Mi piace
Do I make home or home 2 or both
- 0 Mi piace
Hi friend, Is it a bird house you are asking?
- 0 Mi piace
I have made your log birdhouse it is beautiful. Tu now I am working on the two story birdhouse I had to decrease it all to 72 percent. I cannot make the front posts slide into the frame
- 0 Mi piace
Glad you like. Hope you could post the picture for of us all. Happy printing!
- 0 Mi piace
Do I make home or home 2 or both
- 0 Mi piace
what kind of 3d printer do you reccomend for the female shower masturbator. i have an older ender 3 would that work or would u reccomend something different like a resin printer?
- 0 Mi piace
Hi Remmizd. This design will work on any printer. Make sure to have good retraction on nozzle. Happy printing
- 0 Mi piace
what kind of 3d printer do you reccomend for the female shower masturbator. i have an older ender 3 would that work or would u reccomend something different like a resin printer?
- 0 Mi piace
Hello! I have some printing issue on thread screw. In the layers with thread the object has layer shifting. Do you have some idea of the reason? thank you, Matteo
- 0 Mi piace
Hello!
Interested in 48 Head Multi Cyclone Chamber Compact Size - Ender 3 limitation 250 mm. What kind of plastic it is desirable to print it?
Where is fashionable to see reviews?
What is your best cyclone model?
https://cults3d.com/en/3d-model/tool/48-multi-cyclone
- 0 Mi piace
I would suggest 48 head as they are much efficient. Regular PLA should do it. Make sure your printer is fine tunes so there is residue left behind internally. Happy printing
- 0 Mi piace
Where can I see reviews about the performance of your cyclone?
- 0 Mi piace
Another question:
how many meters of plastic will be needed for a shortened version of the cyclone, with what parameters should it be printed?
- 0 Mi piace
You can see the link of youtube video in the file page. I havent printed this for a long time and I cant tell how much pla you needed.
- 0 Mi piace
Hello!
detail a (3).stl in the cyclone for 48 cyclones should also be shortened?
I will make a reduced version of 20 cm
- 0 Mi piace
Keep scale same for every components. You should be fine. Fine tune retraction settings
- 1 Mi piace
I purchased your birdhouse file and downloaded as a.zip.I cant seem to find a file for the small porch roof on the front. I have downloaded several times and I dont see it. Any help will be appreciated. Thanks.
- 0 Mi piace
Hi Ghill. I uploaded one more time. file name balcony. thank you and happy printing :)
- 0 Mi piace
I'm still trying to get this lego like birdhouse together but man, but honestly this wasn't something that was ready to be sold. How many fixes do I send you before you give me a courtesy refund? At any rate, you have an item called SIDES X2 in your files, which is intended to be the two back corners, I guess, since it says X2, however it's really just the back left corner and you didn't include a back right corner at all. printing it twice only makes 2 back left corners as the right corner points in a different direction.
- 0 Mi piace
Sorry for inconvenience. More than happy to provide refund. Unfortunately I dont see that option available from my end. Maybe you have request this from your end.
- 0 Mi piace
refunded
- 0 Mi piace
Can you assure me that the problems with this birdhouse will be solved before I spend any money on it?
- 0 Mi piace
I reoriented the part and it will fit. Just not sure if this is correct. I am pretty new at this and I like this design.
Hi friend. if print bed size too small, you can scale down 10 percent for each files. it should fix the problem. Happy printing