👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇺🇸 Paese dell'utente: Stati Uniti
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Hello I have bambu slicer I tried to use the app you mentioned to cut the bottom of my file off but I was a bit lost. is there any other way to get the bottom of the lithophane off. I wont lie I was tempted to print it as is lol. Any tip you can give me is appreciated
Just have a quick question, I went to print this on maker world and the hands are missing. Can you email me just the bat and ball hands? Thanks
Yes what email address would you like them sent to?
Guten Abend. Können sie auch eine lithophanen Bierflasche machen von der Marke Sternburg Export?
Sure can you send me a picture of what you'd want on the bottle so I use the right image.
I asked for a custom picture to put in the wine bottle, and it came out great. https://ibb.co/hxTtf4fR
Thank you so much
Email the file to unclejoeyscreations@gmail.com I'll get the full STL created for you.
just sent,thank you so much
I only really use Cura and Bambu slicer. If you'd like to send me the stl of the part you want to add to the bottle. I'd be happy to make you the full STL to print.
that would be great where should i send it? I followed the direction for cura, but im not sure how to attach the lithophane to the bottle. im new to this
hello, i purchased the wine bottle so i can make my own, but I am having problems with cura, is there another software i can use to place the nightlight lithophane inside the bottle.
What version of cura are you running? It works fine on my cura.
i purchased this but cannot open it to cura, please help
I don’t see all those pieces in what I have printed off. I have the colored face that is smooth and flat. There is the curved base, another flat piece and the hands. What am I missing/doing wrong
I added the file that for some reason looks like it was removed but its called "clock base with backing" its re-added to the files .If you dont see it after refresh I can send you a direct link to the stl.
I’m not sure how to assemble this clock. Can you help me with that?
I’m not sure how to assemble this clock. Can you help me with that?
The smooth flat part of the base of the clock gets glued to the flat smooth back side of the clock face. I can try to send a picture if that helps.
That would be helpful
you can send it to erwilde@telus.net
This is where the mechanism goes and is the back of the clock....https://photos.app.goo.gl/SrZT2jpdD7PKnKom6
On the other side of this is the flat part that printed on the bed. That flat smooth piece gets glued to the back of the clock face part. When together the back of the clock is that part where the mechanism goes and it's open so you can easily change the battery. Hope this helps.
Can you make a desk Clock with the Phillies? The Eagles one you did is Awesome!
hi i just bought your san fran clock when i manually do color change i do white layer1-5 black 6-13 red 14-15 gold 16 and with one layer of gold red bleeds through gold.
I can add more layers to the gold so it doesn't bleed. What email do you want the file to? Sorry for delayed response.
Do you know why I am getting a privacy error when trying to download your file?
There was an issue with cults site yesterday. Try again today and let me know if it still is failing
Do you have a Las Vegas Raiders wine bottle?
I don't yet. I can design and have it uploaded by the end of the weekend for you.
I've designed and uploaded a las vegas raiders wine bottle. Can be found here ... Enjoy https://cults3d.com/en/3d-model/home/las-vegas-raiders-lithophane-wine-bottle
Hi I don't want to be a pain but can you do a Dallas cowboys desk clock. Thank You
All good no worries I should put a diagram in the photos since your not the only one to ask. Let me know if there's any other clocks you'd like created.
hello i have purchased alot of your wine bottles. I just purchased the nhl rangers clock. now if i super glue it together how do you replace batteries or change the time. and what is the thin piece for. Any pictures of it would be helpful. Thank You
The clock mechanism goes in with the battery facing outwards I've been putting the thin piece towards the top of where the mechanism goes in the slot so that you can still replace the battery and adjust the time on the mechanism. I'll send a link to a sample picture in a little bit.
Here is a link to the backing where the mechanism goes...https://photos.app.goo.gl/SrZT2jpdD7PKnKom6
The flat/back part of the clock face goes against the flat part of the clock part with the mechanism piece facing outwards so it's flat on flat.
thank you it was my stupidity i was putting the back on backwards to close it
CAN YOU MAKE A LITHOPHANE WINE BOTTLE FOR THE UNIVERSITY TENNESSEE VOLS FILE?
Sure I'll get it made and uploaded tonight.
Do you want it to say Tennessee Volunteers or Tennesse Vols ?
Or just University Tennessee ?
Bottle has been made https://cults3d.com/en/3d-model/home/tennessee-volunteers-lithophane-wine-bottle
ALL 32 NFL TEAM LITHOPHANE WINE BOTTLES - When printed are these standard wine bottle size (750 ml)?
They are not the same size as a full wine bottle they are about 250 mm tall.
I purchased both the bill mafia and the other corner piece and both have major problems in them with trying to print on Bambu x1c. There are gaps in the base around the blue bills parts of the buffalo like the file is corrupted and you can not move the blue to cover them up and creates gaps all the way around. Can you please look at the files in Bambu Studio and see if you see the same thing. I wish I could send you pics. I tried to import into tinkered to maybe fill the gaps but that is even worse when it imports it in. Thanks. Keith.
I looked at the file again and it looks smooth to me. What is your email I will email you the 3mf file I have where its all already together.
Hey my man it’s me again the bandwagon son would like Boston Celtics s wine bottle and Dallas maverick please and thank you
I'll have them made up by Tuesday at the latest.
I've added those 2 teams bottles. If you wouldnt mind after you print the files if you could email them to me or post makes to the item page it would be greatly appreciated so people can see the actual product and not just a sliced image.
Hello I have bambu slicer I tried to use the app you mentioned to cut the bottom of my file off but I was a bit lost. is there any other way to get the bottom of the lithophane off. I wont lie I was tempted to print it as is lol. Any tip you can give me is appreciated
The way you can cut the bottom off the lithophane in Bambu just load in the file that you want to cut and press Shift and the letter C this will bring up a cut line dialog box for the height put in 2.5 then hit perform cut, then click off the highlighted images anywhere on the bed and then select just the bottom part that was cut off and delete it. Then you can export the stl (use another name so you know its cut) of that other part (the part you want in the bottle) and import it into the bottle as the original steps included. Let me know if you have any issues with it.
Thank you for responding, I'll keep you posted
OMG it worked perfectly thank you soooo much
My pleasure, enjoy!