182 commenti

Saludos disculpa por tardar en contestar, si claro, que tienes en mente? mi correo es: markdeyaboo@gmail.com

Hello, I uploaded the 3mf file where the colors are separated; I'm not sure if this file can be opened in Orca Slicer.

Thank u!

Greetings JUBILEE, it's no trouble at all, that's what we're here for. I didn't modify the sizes, I only focused on separating the eyes, mouths, and eyebrows. When I read your message, I went to the first figures I used for this post and compared them with the two test heads I made with everything separated, and they're the same size... that's why I compared them... I uploaded the photos to the Cults post so you can take a look and see that they're the same size. The camera perspective doesn't help in both cases, but they are the same size...

https://cults3d.com/es/modelo-3d/arte/charly-and-lucy-fanart

The photos I just took are at the very end.

Hi JUBILEE, I'm really sorry you're wasting material. Work has me very busy, but please give me these few days to upload Charlie's and Lucy's heads separately.

Hello JUBILEE, I hope you're doing well. I wanted to let you know that I've uploaded both heads, all separated, in ZIP files. Sorry for the delay; I've been printing and making sure everything fits together. I hope you like them. Have a great day!

Greetings, thank you for your patience. I slightly modified the eyes, eyebrows, and mouth of both Lucy and Charlie to add bleed, and I changed the print orientation of Charlie's head. The previous orientation was faster but lower quality; now it takes a little longer but improves quality. (You can decide whether to change the orientation of Lucy's head.) I've included images of the finished piece with these changes. There's still a slight shadow, but it's less noticeable. I hope you like these changes, and if you're still considering a refund, I'd be happy to issue one. I hope you had a wonderful New Year.

https://ibb.co/QFbTDCFb
https://ibb.co/Nn3vcD4S
https://ibb.co/S4GpfjVs
https://ibb.co/fGdzxWQK

I apologize, I've been feeling unwell these past few days and today I have a headache that's preventing me from doing much. I hope you can wait for me.

Hello, in the modeling description I always mention that I adjusted the slicer parameters, so please adjust them as you prefer. I do this so you can fine-tune the settings and get the best print quality, choosing between quality and speed. Perhaps my mistake is assuming everyone knows how to use the slicer well. I apologize. The problem you're having can be fixed by activating the purge tower, right-clicking on the image, finding the purge options, and disabling the infill purging option. This should eliminate the marks you're showing me in the image. But if you don't like the model, I can refund your money without any problem. Let me know what you decide; I'm here to help.

Hello, I've re-uploaded the STL files, but in a ZIP format, and added two images showing the figure's structure. I hope this solves your problem. I'll be waiting for your response.

Hello Jubilee, excuse me, which model are you referring to?

Muchas GRACIAS, que bueno que te gusten mis modelados, una disculpa cuando diseñe esos modelos aun no tenia impresora multicolor, y el diseño de la casa fue de mis primeros diseño pero espero despues darme el tiempo de actualizarlos, si necesitas que modifique algo dime y tratare de hacerlo, y gracias por tus palabras

Esperare ansioso esas modificaciones, quizá agregar algunos alojamientos para imanes seria genial.
Mientras seguiré probando tus demás diseños!!

Okay buddy, check it out to see if that's what you wanted...

you are awesome thank you so much we are huge peanut fans! love your models keep it up!

Thank you so much, I'm glad you like my models, I'm also a fan of peanut, I hope you like my new model.

Saludos yo gaste un promedio de 200 gramos en esta figura, te recomiendo para que evites estas molestias que analices bien las imágenes de los modelados antes de comprar, en las imágenes puedes ver si la figura esta dividida y si usa la impresión multicolor puedes ver si en una misma capa se aplican varios colores esto da pie a que va a gastar tiempo y material, adamas puedes jugar con el relleno y la torre principal, en fin que tengas un buen día y ya quedo listo tu reembolso.

Saludos, no tengo, pero me gusto la idea ya tenia ganas de hacer un Mojo jojo, empezare con las chicas, estuve viendo imágenes para modelarlas espero no tardarme mucho, date la vuelta en unas semanas a ver si ya las tengo.

Hola, estaré pendiente de tus nuevos proyectos. ¡Mucho éxito!

Saludos, si quieres algo muy especifico y que lo modele desde cero mándame un correo y déjame cotizártelo y si solo lo quieres como dices con la capucha y el logo de los Chicago Cubs, dime una oferta, me gusta la idea de verlo como beisbolista

The 3MF file shows the layer orientation as I printed it. The bad thing about this orientation is that the tree supports leave marks, which I tried to remove by sanding a little and applying a little heat. However, if you rotate it 90 degrees, you might use fewer supports and damage the piece less.

This is the approach I took 🤞🏼it doesn't fail lol I'm sure it will be fine though. Any plans to do a skeleton snoopy?!

Snoopy skeleton, I like the idea but I feel like there's no more time since Halloween is just around the corner....

Hi, sorry, I sent it assuming the files had already been downloaded. After sending the message, I deleted the wrong file and left the original one.

Ok, so the original is the correct file? Thanks.

Sorry, I didn't receive your email, but I couldn't find it. I tried to see what the error was. I uploaded a photo of the shorts and the legs. There are two holes in the shorts where the legs go in. I'm leaving an image as a reference. Is it on the shorts where you're referring to the problem?

Greetings, could you please send me a screenshot of the problem to markdeyaboo@gmail.com

Saludos, he estado algo ocupado, pero deja que tenga un tiempo libre y se los separo, vale

Muchas gracias