25 commenti

also does it fit sleeved cards?

The Field Zone was not included due to the overall thickness of the product. If the Field Zone were added, the front wing section would become too thin, which could make printing difficult or cause it to break easily after printing.

Also, cards with sleeves will likely fit very tightly. The design is based on standard card dimensions, so I can’t guarantee the fit for sleeved cards.

Unfortunately, that would require quite a lot of additional work.
For the housing, I would need to create extra openings so all the buttons can function properly, and also add additional features to make sure the buttons stay securely in place.

So, it would be difficult to proceed with that request. Sorry:(

That's alright, I was wondering though is the final product thick enough for me to carve out a space to modify myself? It would really help to see an image of the finished product.

I went ahead and bought it anyway, if I ever get a vital bracelet fit into it I'll make sure to upload a picture, credit you and refer people to come here to buy your file if they want to make one themselves. Thanks for your work.

Just one question on the scaling, is it mm or cm?

Hi!
Just to make sure — are you referring to the Blade Part or the Main Body Part as named in the manual? I want to double-check the exact term from the manual so there’s no mix-up.

It is possible to provide the part as a single-piece model, but I’ll need a few days to prepare and adjust the file properly. Once it’s ready, I’ll update the file.

Also, just a heads-up — even with the H2C printer, the Blade Part is quite large, so printing it in one piece might be a bit challenging depending on your setup.

Let me know which part you mean.

Hi —the part where you draw the deck without the wings where where i set the cards in the duell

I’ll upload it for you soon 🙂

Thanks

One more thing: when you are editing the files in Fusion 360 or what you use in 3D, try to set a higher sea resolution when exporting to STL. This way, you remove the small, fine edges in the STL file, and thus you get a nice result

Thanks for letting me, will check immediately and let you know.

Hi, I’ve double-checked the Digivice Burst_Digimon Data Squad model files, and all parts are included—there doesn’t appear to be any missing file. And the part you said that holds the lens for the scanner is included in the "assembly folder" and is saved under the file name “Camera.STL”

I checked th folder i originally downloaded it wasn't there but when I downloaded it again I found it

That can occasionally happen, so I’m glad to hear the issue has been resolved. Thank you very much for enjoying my model. If you have any other questions or run into any issues in the future, please feel free to leave a comment anytime.

Happy new year! Yes the Blade parts are retractable!

I'm so sorry to late reply, yes you need adhesive or super glue

I'm so sorry to late reply, and thank you so much for your interest and for printing one of my Digivices!

As for the Digimon Xros Digivice, I actually haven’t seen that series yet, so I don’t have any plans to make it at the moment. However, if there is a lot of interest and requests from people in the future, I would definitely be open to considering making it.

Thanks again for your support!

Thank you so much for your interest in the Duel Disk. Unfortunately, the Bambu Lab A1 Mini (180mm x 180mm) build plate is a bit too small to print some of the parts in this model.
But, if you’re really wanted, it is possible to slice the large parts into smaller pieces using your slicing software (like OrcaSlicer or Bambu studio). It’ll take a bit of extra work, but it can be done!

With my 3D printer settings, it showed 21.69 g for the model and 1.37 g for the supports, so a total of about 23 g of filament.

Thanks for sharing your great idea. I'll consider it.

Thank you im glade you like it !

Thank you for your interest in our products. Unfortunately, the discount on this product has only been available for two months and is no longer available.

Hey! Thank you so much — I’m really glad you liked the Duel Disk model! 🙌
The GX Duel Disk is definitely something I’d like to make in the future.
I’m currently researching it, but it may take a bit of time since references are limited.

Maybe you can rewatch the anime ahah, or i have an other Duel Disk in mind called Chaos Duel Disk from YuGiOh the disk is dark Green you can found it on google if you don't ill send you all pics i found !
Btw for the actual Disk i have some questions too

GX duel disk images :
https://ibb.co/VWNW627r
https://ibb.co/twtQs9t7
https://ibb.co/8ntH7w7n
https://ibb.co/PGgVfBDr
https://ibb.co/TDjdyBtg
This Guy make it with cardboard maybe that's help you :
https://youtu.be/GHL-vRtIVt8?si=2GwQaon8_gc-nqmK

Yes, absolutely! Once you've purchased a model, you can always re-download it later anytime from your account's purchase history.

I really want to help you, but please reply to my previous message instead of posting new comments every time. It's difficult to follow the conversation and assist you properly this way. Once again, please just let me know which model you're having trouble with, and I’ll fix it right away.

Could you let me know which model you're having trouble with? I saw you downloaded two recently

I'm so sorry to hear you're having trouble downloading the file. That definitely shouldn’t happen. I recommend first trying to re-download it from your purchase page — sometimes it’s a temporary issue. But if it still doesn’t work, feel free to message me directly and I’ll send you the files via private link or email. I’ll make sure you get what you paid for!

Definitely planning on it someday! Just working on another project now, and reference pics for the GX disk are kinda limited — so it might take a bit of time!"

Not at all, I’m actually working on the D-Terminal from Digimon Adventure 02 right now!
It’s almost done and should be ready for release soon. Super excited to share it — stay tuned!

Thats a great idea

Oh thank you so much — that really means a lot to me! 😊
I’m just super happy to share these with everyone. Your support seriously keeps me going. Thanks again!

no problem

Yes, it’s on my list! It may take some time though — I need to gather more design references to make it as accurate as possible.

Awesome, do you mind is I ask what else is on your list?

Digivice Burst is top of the list right now!
Next up, I’m planning the D-Terminal from Digimon 02. Or maybe even some custom or fan-requested ones too!
If u have any suggestion, I’m always open to ideas

The only other digivice I have watched the show is the xros loader from xros wars or 2020 reboot digivice. oother than that i think you have done all the ones you can.

Hi! Thanks for reaching out and for your interest in my work!
I’m not too familiar with the Digivices from Data Squad or Xros Wars, but so far I’ve mostly created Digivices from series I’ve watched or received specific requests for.

That said, I’m definitely open to the idea of making those too—especially if someone’s interested or looking to commission a custom model. Let me know what you have in mind!

What is the process of having that done?

I'm currently working on the Ultimate ver of Digivice from Digimon Frontier. It will release soon, and I haven't decided what to do next. Feel free to tell me what you want to see next:)

I would like the digivice from digimon savers both the original and the burst version if that’s not to much troubl.

Thanks for letting me know:D I’ll get started on it as soon as I finish my current project.

No thank you for doing it your digivices are the best I have seen

Well, first of all, sorry for the late reply, and thank you for purchasing my model. I’m currently working on another project at the moment. I’d like to let you know that I’ll produce it as soon as possible after I finish.

Hi, sorry for late reply. No it’s not. It just a scale model which is solid.

Is it possible for me to make it hallow

well it could, but need to know accurate size to make new 3d model file