Hey, are you able to provide a solid file to be printed on an fdm machine ? im interested in citroen c5 x7 i have bought it already but im having trouble working with the mesh file
- 0 Mi piace
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇧🇷 Paese dell'utente: Brasile
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Scrivi il tuo messaggio:
198 commenti
I'll take a look on this today.
- 0 Mi piace
Much appreciated, thank you.
- 0 Mi piace
Compre el diseño del camry xv30 las paredes estan muy finas y el diseño se imprime con agujeros si uno compra es diiseño es increible que vendas un archivo que esta gratis en internent pense que porlo menos te habias tomado el tiempo dw pegarle las ruedas pero no las ruedas estan en el aire .eres un estafador deja de hacer esl
- 0 Mi piace
solicito un reembolso
- 0 Mi piace
Hi there, I’ve updated the file and fixed the errors. Please take a quick look and let me know if it’s now printing properly, and if not I’ll process your refund straight away. Kind regards,
- 0 Mi piace
ya lo mire esta inpresentable la calidad es impresentable muy mala parase que ubiera metido un carro dentro de otro carro
- 0 Mi piace
Sorry about that, I made a mistake when exporting from the project. I’ve re-exported it properly and fixed the issue where it looked like one car was inside another, so it should now be clean and printable. Please download the updated file and have another look. Kind regards,
- 0 Mi piace
no te da pena cobrar 7 euros por eso tan feo
- 0 Mi piace
no se le ve ningun detallle de un camry parese un carrito cualquiera mejores hay en makerworld gratis
- 0 Mi piace
Hello, I am having issues with the Infiniti G 37 coupe 2009 file. When I go to print it, it tells me there are. 1032 non-manifold edges and will not print properly. It removes the windows and adds supports where there shouldn’t be.
- 0 Mi piace
For the Mazda 323f, was the design based on a 3d scanned car? Im going to use it as a basis for modeling aero parts for my actual car.
- 0 Mi piace
Not a 3D scan. It's 3D modeled.
- 0 Mi piace
https://cults3d.com/ru/3d-model/igra/audi-80-b4-1991-pre-supported
Hi. Is it possible to change the design of the wheels in this model? ronal votex competition R16 4/108
- 0 Mi piace
Do you have any reference image?
- 1 Mi piace
- 0 Mi piace
Hi this thing is rough, Do you have a version the Tracks and Bogies seperated?
- 0 Mi piace
What model are you talking about buddy?
- 0 Mi piace
The box on the left (port) side broke while printing. (very thin)
- 0 Mi piace
All files have a mistake.
The front chamfer is not straight.
I have pictures but can not upload them...
- 0 Mi piace
“Hey! Which model are you referring to? I’ll check it on my side.”
- 0 Mi piace
I intend on printing a British force for Team Yankee and I really like the look of your models. I have been reading some of the review and messages people have left and just wanted some clarification on the models as some people seem to have received files where turrets have been a single piece with the hull. Having traversable turrets quite important for the game so I was hoping you could let me know if this is the case for the FV4201 Chieftain MK10, Chieftain MK-6, Challenger MBT and FV510 Warrior.
Additionally I was wondering if you had plans to release an Abbot and or Tracked Rapier any time in the future.
Thank you
- 0 Mi piace
Hi! Thanks for reaching out and for the kind words, I really appreciate it.
Just to clarify: some of my older models are currently going through updates. As part of that, the main gun parts, the turret, and the hull are being separated, with proper sockets/fitments so the turret can traverse.
So far, the FV510 Warrior, FV4201 Chieftain MK10, Chieftain MK-6, and the Challenger MBT have already received these updates and now come with those parts separated and with matching connectors.
I’ll also check on the possibility of getting the updated/new uploads posted by Saturday and will follow up as soon as I have a confirmation.
Thanks again!
- 1 Mi piace
Awesome, Thank you.
- 0 Mi piace
Just Added : https://cults3d.com/en/3d-model/game/tracked-rapier-rcm-748-sam-united-kngdom-cold-war-1983
- 1 Mi piace
Awesome thank you. I bought the Warrior and Challenger 1 earlier today so I will get those printed over the weekend. The models look great, Its a shame there is no peg on the under side of the turret and corresponding socket in the hull roof but that is a super easy fix I can do on my own so its not an issue really.
My only real feed back so far is that there is a few parts that I think will be too small to print at 1/100th scale. Grills on the engine deck as an example will be lost when printing that small. So those details would bentonite from perhaps being made a little more exaggerated on the smaller versions. But again that's a very minor issue. Over all I think they are awesome and I will be sure to post some picks once I have got them printed.
I will get the, models I have printed and painted and then I will get the tracked rapier and some other models I have my eye on :P
- 0 Mi piace
thanks!
- 0 Mi piace
Hello Buddy! It has been updated, any other problems please let me know, I'll fix it as soon as i can.
- 0 Mi piace
Are the covers of all the files actual printed models, or CG images?
- 0 Mi piace
The cover images are CG renders, not photos of printed models.
- 0 Mi piace
sorry but . . the alfa TZ model has a lot of flaws: look at the sides full of dents , inaccurate wheels, out of scale glass frames . . .
- 0 Mi piace
I’ll review and fix it today and get back to you with an update.
- 0 Mi piace
Hello sir, can you accept my offer?
- 0 Mi piace
Hey, I’m trying to download design#1136847 after I purchased it but it’s not letting me open up the file or attach it as a file. Anyway to fix this issue?
- 0 Mi piace
i have a few pending files i have made a offer on waiting
- 0 Mi piace
Thanks! I accepted some offers already, but a few were just too low. If you resend a reasonable offer, I’ll review it.
- 0 Mi piace
i have a few pending files i have made a offer on waiting
- 0 Mi piace
Thanks! I accepted some offers already, but a few were just too low. If you resend a reasonable offer, I’ll review it.
- 0 Mi piace
Buonasera ho fatto una offerta puoi accettare grazie
- 0 Mi piace
Hi! I accepted some offers, but others were too low. Feel free to send a fair offer and I’ll take a look.
- 0 Mi piace
Hello, the volvo xc60 is with interior and it doesn't suit me. Could you refund? Thank you
- 0 Mi piace
Hi! No problem, I’ll issue a refund for the Volvo XC60. Thanks.
- 0 Mi piace
Hi, love your work and very excited to get the following orders printed: 147627920, 143655022, and Quick question though: I am trying to figure out the best way to print in 1/43 scale since I can turn the model from solid to hollow by removing the windows. Only issue Im having is that when I try to take the design apart piece by piece, some of the parts are "sticking" together.
Any chance you can rework these a bit to ensure that it can be taken apart piece by piece? Huge bonus would be if I could remove the tailgates / put it in the downward/upward position but that may be asking for too much!! Please see images for reference.
https://ibb.co/VWSQ6PYb
https://ibb.co/gZLBNnt3
https://ibb.co/BFr57Z4
https://ibb.co/QvKSy5Pb
Many thanks,
Sam
- 0 Mi piace
Hi, just wanted to check back in before the blocos start up ahead of carnival :) Is this something you might be able to help with? thanks so much!
- 0 Mi piace
Thanks for the details. I don’t do custom ‘split into separate pieces’ versions of files.
- 0 Mi piace
can you fix my F250 3d mode i bought its the same thing as the others
- 0 Mi piace
Hi! Could you please send me your order number (or the purchase receipt) and the link to the exact model you bought? I’m not finding “F250” under that name in my sales/download history, so I want to make sure I’m looking at the right file before I fix anything.
- 0 Mi piace
https://cults3d.com/en/3d-model/various/ford-super-duty-crew-cab-2011-pre-supported
It was this one but idk the order number and weren’t you supposed to give me a refund on that one
- 0 Mi piace
I’ve just updated the model on that page. Please download the latest version and check if it’s working properly for you now. If you still see the same issue after updating, tell me what exactly is wrong, and I’ll take another look.
- 0 Mi piace
It works but I want it in a low Polly mode we’re I’d doesnt have to slice so long and make the truck bed flat
- 0 Mi piace
Hello,
i recently bought the 2S6 Tunguska model und would kindly ask for a refund.
The reason for it is, that i´m not satisfied with the quality of the Model. It has some imperfections and the triangulated surface adds to it.
The order nbr is as follows: 147253278
I hope you understand this and that we can find a fix for it.
Sorry for the inconvenience.
Kind regards
- 0 Mi piace
Hey Griffon
I’ve taken a careful look at the model and spent some time working on it. I corrected the mesh, made it fully solid, and separated some parts so it’s now available both as a single-piece model and as separated parts designed for proper fitting and assembly. This should also address the triangulation and surface issues you mentioned.
The updated files are now available. Please take a look and let me know if this version meets your expectations and feels better to you.
If, after reviewing the updated model, you’re still not satisfied, that’s absolutely fine. Just let me know and I will process the refund without any problem.
Thanks again for your feedback and for giving me the chance to improve the model.
- 1 Mi piace
Hey, thank you so much for looking into it!
It looks way better now, i´m very thankfull you spend the time and optimized the model!
I have only one little request if its okay. Could you please seperate the armament of the Turret to make it positionable aswell? There are many pictures showing the moveable parts - that would make this perfect for my and i think many others usecase!
The 2S6 is way to unterrepresented in the modelling community...
Cheers
- 0 Mi piace
Hi How many parts have your car models? I need 1/43 to build a drift car is it possible?
- 0 Mi piace
Usually it’s a single solid part. I design them that way to keep printing simple and sturdy, because apparently gravity and thin walls are still undefeated.
That said, I can separate the wheels and add proper peg/slot fittings if you want, which works much better for things like drift builds. If the model is an older one, I may need to do a full update to reinforce geometry and make it properly solid. That kind of refresh usually takes around 1 to 3 days, depending on how ancient the file is.
Totally doable, just not instant magic.
- 0 Mi piace
Hi, I'd like to request a refund for the Audi A5 Sportsback model or some way of making it work. The model is hollow so the slicer can't make it work properly without missing lots of features as they are too thin.
- 0 Mi piace
Hi, thank you for reaching out and explaining the issue. I understand your concern and I’ve already prepared a fix for the model. I released an updated version with adjusted wall thickness so it prints properly on FDM, avoiding the thin features being lost by the slicer, while keeping the details intact. Before moving forward with a refund, could you please let me know if, after this update, you would like to try the corrected version? If you still prefer a refund, no problem at all, I’ll take care of it right away.
- 1 Mi piace
Hey that's fantastic! You've just made it on to my favourites list! Great work. Increasing the wall thickness and separating the wheels seems to have worked great. It sliced fine. I've got a test print on now.
Thanks, it's nice to see a creator who sticks behind there work and sorts issues!
Thank you!
- 0 Mi piace
Thank you so much for the kind words, I really appreciate it. Just to give you some context, most of the car models are older releases, and lately I’ve been focusing much more on military models, which is why those follow newer standards by default. That said, if you come across any issues with other car models, feel free to send me a message. I’m more than happy to update them, including separating the wheels and adjusting wall thickness, usually on the same day. Thanks again for the feedback and for giving the updated version a try, it really means a lot.
- 0 Mi piace
Hi, I'd like to request a refund for the Audi A5 Sportsback model or some way of making it work. The model is hollow so the slicer can't make it work properly without missing lots of features as they are too thin.
- 0 Mi piace
Hi, thank you for reaching out and explaining the issue. I understand your concern and I’ve already prepared a fix for the model. I released an updated version with adjusted wall thickness so it prints properly on FDM, avoiding the thin features being lost by the slicer, while keeping the details intact. Before moving forward with a refund, could you please let me know if, after this update, you would like to try the corrected version? If you still prefer a refund, no problem at all, I’ll take care of it right away.
- 0 Mi piace
Good afternoon, I am the owner of the nissan gtr r 32 model from tamyia. There was an unpleasant situation in which the detail, namely spoiler (stock) was lost, I've been looking for a spoiler model to print for a very long time, and you saw the model of the 32nd if you have a model of the 12th scale, you can help by sharing the spoiler model is very necessary. Thanks for your time. Goodbye;)