I like designing and 3D printing stuff.
All my designs have been 3D printed and verified to make sure they can be printed without any issue. I also add features to the design to minimize the use of supports during printing process.
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇱🇰 Paese dell'utente: Sri Lanka
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Hallo, nice design. I need the Graphics for the Computer long download. Please send me the pictures. Thank you.
Hello Friend,
Graphics uploaded.
Pls check now.
Thanks
Hello,
So im very interested in the U-wing you have listed, however I have some questions about it before I buy.
Do both sides of the transport bays have function doors that open and close?
Does the cockpit seat rotate?
Do the wings move and function as the force link version?
The U-wing desgin has small variations in their appearances in rebels, rouge one, andor etc as such,
Does this desgin have windows on the top and bottom of the cockpit or just the top?
Is the bench in the transport bay removable or meant to be locked in with glue?
6.is the Overall assembly to be done with glue? Or are there rods/connectors intended along with glue?
Does the top section that is meant to be removable have clips or is it desgined to allow spaces for magnets?
Have you thought about adding alternative wings, engines and under panels/windows? This would allow the buyer to swap short and long wings, number of engines and windows on the bottom to make the versions shown in rouge one, mando, as well as the one shown in rebels.
Ps sorry to ask so many questions. I wish Haslab would make one of these officially i love the ship desgin but yours looks like the closest I can get to having one lol
1 . no, it doesn't have doors
2. no, its not rotatble
3. no, its not functionable
4. yes, it has windows top and bottom
5. yes, its removable
6. yes, it has keys to perfect fit
7. yes, top section is removable but it doesn't have spaces for magnets
8. no, it doesn't have alternative wings and it has 4 engines
hi I've downloaded the file rappertunie-for-3-75-in-6-in-figure-diorama-1-18-1-12 however i can only see there is one file in the zip yet it states 3.5inch and 6inch. can you let me know what size it is?
Hi, it's in 3.75in scale.
Hello, I just purchased the file for the Custom Star Wars Computer Console for 3.75/6" Figure Diorama, but cannot find the graphics file. Would you be able to help? Thank you!
Would you sell the small Star Trek VI figures too??
Sorry, I don't design Star Trek figures.
Who did?
Hey! I was really inspired by your work, so I tried making a similar model. It’s not as good as yours, but I’d love if you could check out my effort!
https://cults3d.com/:3680328
Ahh sorry I’m referring to Han Solo blaster
It's split into 4 parts.
Do you have pictures of the files so I can see what’s involved in the printing at all or can you upload the images showing them split?
hello, is this split into parts? if so how many components please?
Hi, what's the design?
Hey there. I hate to bother you, but I have. Question that I really hope you can help me out with.
I purchased the diorama pipes for my 3.75” spaceport and I can’t seem to get it to print on my A1 mini.
Any thoughts on what I can do? I have it set in my bamboo app for the A1 mini.
I might be better off paying to have these printed. I just need it really soon. Can you help me out either way?
My email is hollywood0976@yahoo.com
The ones I got are these:
Custom Pipes and Ducts Set for 3.75 in (1:18) Figure Star Wars Diorama
by 3dstufflk
Does the front door spin or just open?
Yes, that's the plan.
I saw your print of Padmé’s apartment bedroom. Well done! Can you also make Padmé Amidala’s Coruscant apartment living room and verandah?
Hi, apartment is already in cults but we haven't made on yet. Still working on verandah.
I paid to download the Custom FOOD STAND DINER SHOP STALL for 3.75 IN (1:18) Figure Diorama, but it refuses to download stating either "check your connection" or "file is was not available on the site". It there another way I can download it?
Hi please help urgently. Ive paid for your gi joe cobra throne file but I get an error message "the destination path is too long. Rename the compressed (zipped) folder and try again. I cant access the files to do this
Hi, checked the files. It works fine with no issue. "the destination path is too long" this is a windows related issue. Please try to unzip the file in the desktop or download folder. Rename it with a single letter.
Hey, are you planning on making the Andor Ferrix Belltower available as a file? I’ve seen the full print on your eBay page, but was just wondering if you were going to list it here at some point. Thanks!
This model is horrible. Too thick and extruded. Real Emperor's throne windows aren't like that. It just doesn't fit in the shelf as I need it. I want a refund
We have printed over 50 of this and had no issue. Anyway, I sent a full refund. Thanks.
Are there instructions for the Mego Star trek Enterprise Bridge? I cant for the life of me figure out what goes where
Hi, print all parts, you should be able to easily assembled as per the images I have provided. You need to print multiple parts from some. Ex: You need 8 chairs, there are 4 parts for the chair, so you need to print 8 from each. If that doesn't help, let me know. I'll send you some instructions.
Hi
I’ve just purchased your file for the Eye of Mara. Could you tell me hat you used for the red ruby in the eye?
Cheers
Hi, we used a crystal which was removed from a ear ring. I think you can find a similar one.
Hello there. I just bought the Ad billboard signs and it says "graphics included". But there are no graphics, only the stl´s.
Hi, sorry. I'll upload the graphics by tomorrow.
Hi, Graphics uploaded. Pls check your mails.
Thank you very much!
did you mean Use 67% scale for 3.75in figures. for the playmates figures? 92-94ish era?
Hi, if I have mentioned the files are for 6in figures, yes. Scale all files to 67% for 3.75in figures. If I have mentioned the files are for 3.75in figures (Most of my designs are for 3.75in figures), you need to scale them to 150% for 6in figures.
Sorry, the playmates startrek line is 4inch i think sorry i think i confused myself
woops 4.5
Hi, the files are missing on "Star Trek USS Enterprise Bridge for 3.75 in (1:18) Figure Diorama" ?
Hi 3dstufflk,
Am wondering if you could include the graphic for the biobed? I think your description says it is included, but I can find no image file?
Thank you,
Wil
Hello friend,
Problem solved.
Sorry for the trouble.
Pls check your downloadable link.
Thanks !
Your still not on Etsy.
Hi, no. Only on cults and sell 3D prints on eBay.
Kindly Possible to print several physical copies of your designs to place in my store and offer you percentage per sale?
Sorry, these files are for personal use only. I sell 3D prints on eBay, if you need to sell 3D prints, you can purchase them from me for a discounted price and re-sell. Thanks.
Sorry how do you mean purchase from you?
Looks like you have got most for free from renderhub etc and some patreons and selling other people's designs and nothing of your own!
Well, I told you how this is going to work.
So if I was to order 500£ of your models retail how much would it cost me?
25% off
But Everything you have on here you haven't destroyed
Designed
Excuse me, what made you say that? I remember you said the same thing before. We are a company, we have our own designers. Everything we have here are our own designs.
Buenos días.
He comprado su archivo del ataud de amidala.
¿existe la posibilidad de actualizarlo con un archivo ya montado en una sola pieza?, para imprimirlo de una vez?
gracias
Thank You for the Graphics