Urinary System Kidneys, bladder, glands

Explore the Urinary System in Stunning Detail!

Introducing the complete 3D model of the Urinary System, an essential tool for educators, students, and healthcare professionals. This detailed model includes all the major components of the urinary system, providing a deep and accurate understanding of its anatomy and function.

What's Included:
Kidneys: Two meticulously modeled kidneys, with one displaying a cross-sectional cut that reveals internal parts such as the renal pelvis, calyces, and cortex, offering a detailed view of renal anatomy.

Adrenal Glands: Located atop the kidneys, these glands are accurately modeled to highlight their position and importance in the endocrine system.

Ureters: The ureters are precisely represented, showing their vital role in transporting urine from the kidneys to the bladder.

Bladder: The urinary bladder is intricately modeled, demonstrating its storage capacity and connection to the ureters.

Vena Cava and Aorta: The main veins and arteries of the body are included, with the vena cava and aorta modeled to show essential blood circulation in the urinary system.

Renal Vein and Artery: The specific vascular connections to the kidneys are included, allowing for a comprehensive understanding of renal blood flow.

This 3D model of the urinary system is perfect for high-quality printing and serves as an essential tool for teaching anatomy or for use in professional presentations. With the inclusion of a cross-sectioned kidney, adrenal glands, and major veins and arteries, this model offers a complete and interactive educational experience.

Get it now on Cults 3D and take your study of the urinary system to a new level of detail!

Here are the recommended settings for achieving the best results when printing with ABS using ORCA Slicer:

Main Settings:

1. Nozzle Temperature:

   • Recommendation: 240°C - 250°C
   • Adjust the temperature as needed for the specific type of ABS you're using.

2. Bed Temperature:

   • Recommendation: 100°C - 110°C
   • Keep the bed well-heated to prevent warping issues.

3. Print Speed:

   • Recommendation: 40 - 50 mm/s
   • A slower print speed helps ensure good adhesion and print quality.

4. Layer Height:

   • Recommendation: 0.1 - 0.2 mm
   • Use a lower layer height for fine details and a higher one for faster printing.

5. Cooling Settings:

   • Cooling Fan: Off or up to 20%
   • ABS tends to warp if cooled too quickly, so keep the fan off or at a very low setting.

6. Bed Adhesion:

   • Recommended Methods: Glue stick, Kapton tape, hairspray, or a mixture of ABS dissolved in acetone applied to the bed.
   • These methods improve first-layer adhesion and reduce the likelihood of warping.

7. Retraction:

   • Retraction Distance: 1 - 2 mm
   • Retraction Speed: 20 - 40 mm/s
   • Configure retraction to minimize stringing between parts.

8. Material Flow:

   • Recommendation: 100% - 105%
   • Adjust the flow as needed to ensure consistent extrusion and avoid under-extrusion.

Additional Tips:

• Preheating: Ensure both the nozzle and bed are fully preheated before starting the print.
• Ambient Temperature Control: If possible, maintain a stable ambient temperature to avoid drafts that could cause warping.

By following these settings, you can achieve high-quality results when printing with ABS using ORCA Slicer.