TAIL LIGHT FOR AUSTIN MINI

Customized rear lights for the Mini.

This is a digital STL file for the custom rear lights of a Mini. Please note that this is not an OEM product; the design is entirely handcrafted and intended for custom builds. Installation and assembly require several artisanal skills, including acrylic cutting and shaping, soldering, and basic electronics knowledge.

Product Details:

The headlight is designed to be fixed with 4 M4 screws, just like the original Mini rear light.

Required Materials & Tools:

Electrical wires

Double-sided tape (optional)

Quick-setting glue

Silicone (preferably black, high-quality)

Soldering iron and solder

3 mm white and red acrylic sheets

White and red LEDs

Appropriate resistors

Inside the downloaded folder, you will find a text document containing links to purchase acrylic sheets and LEDs.

Assembly Instructions:

Printing: Once printed, the STL parts will need to be prepared for LED installation.

LED Placement: The reversing light has a dedicated position at the bottom to ensure the red and white lights do not overlap. The LED arrangement is non-standard, allowing you to customise the appearance and illumination to your preference.

Acrylic Cutting & Shaping: Acrylic sheets must be cut precisely, especially for the reversing light. Due to the curved design of the headlights, the acrylic may need to be carefully moulded to fit correctly.

Headlight Closure: Use black silicone to seal the headlight, ensuring a clean, invisible finish.

Electrical Safety: Include resistors to prevent LED burnout.

Reflectors: All headlights require reflectors. You can use double-sided reflective tape inside the headlight, for example, beneath the reversing light, to enhance reflectivity.

On YouTube, there are dozens of videos on building homemade lighthouses where you can find inspiration and ideas, as well as learn skills or improve your project.

Note: Creating these rear lights requires hands-on skills and patience. If you are not comfortable with cutting, shaping, soldering, or basic electronic assembly, this project may be challenging.

MY SETTINGS

NOZZLE 0.4

LAYER 0.25

FILL 30% OCTET

NUMBER WALLS 3

NEED SUPPORTS = TREE

NUMBER TOP LAYERS 5

NUMBER LOWER LAYERS 5