Anycubic Photon Mono 4K Exposure Calibration RERF

** Basicly this model is free, put price is 0 and download it, if it work for you and you want buy me a coffee feel free to put number you want in next download, Thank you so much**

Hot news (from comment): Anycubic 4K new firmware at their website, and included their RERF file, so my design should work still fine but time step changed

After few days searching RERF file for my brand new Anycubic Photon Mono 4K, i found nothing :(
So i decided to make my own file based on XP2 Calibration from Photoners. I made some change and re allocation some elements to fit to plate size of Photon Mono 4K without rescale (little bit :P) them

P/S: My English not good, sorry :(

• As instruction of "Dennys wang" at this video: www.youtube.com/watch?v=15k69E_--2M&t=607s

1. Remove Build Plate and Resin Tank
2. Print Test File (in anycubic usb, or your can find that at their website Test.pwma), and then stop the print after exposure at first layer
3. intall build plate and resin tank
4. Print the RERF or multiple exposure file.

• RERF is BUILD-IN feature of ANYCUBIC machine, it auto enabled when you print the file with filename is "R_E_R_F.pwma", so you dont have to do anything, just print the file that i attached.

• Each part will auto increase exposure time (on normal layers) by 0.4s, start from what you set in slicer's profile, i already set 0.8, i also attached STL file so you can slice it yourself with your setting:

1= 0,8 (default, you can set this in your slicer)
2= 1,2
3= 1,6
4= 2,0
5= 2,4
6= 2,8
7= 3,2
8= 3,6