GLO-WING Half-breastplate🛡️

CHEST HARNESS,CHEST STRAP FIT
for
Shoulder & UPPER TORSO COVER
to be worn as
COSPLAY / Pectoral ornament
SHEEN/COVER/PLATE
AND CAN BE PRINTED IN HOLLOW
3D Print Setting
TO OPTIMIZE USE OF FILAMENT
*Glow in dark 3d printing filament
AND ALSO
ENABLE
LED CABLE FITTING
Combination of Diffusers to
fashion Concept

to look not too bright... ONLY
Well lit up for the Occasion

3D print settings you can try:

• Layer Height: 0.2mm for a good balance between detail and print speed
• Infill: 20-30% for a sturdy but lightweight structure
• Wall Thickness: 1-2mm for a hollow wall, depending on the design
• Printing Temperature: 210-240°C for TPU glow filament or 190-220°C for PLA glow filament
• Printing Speed: 30-50 mm/s for TPU glow filament or 50-70 mm/s for PLA glow filament
• Fan Speed: Lower fan speed (20-30%) to prevent warping and improve layer adhesion

Some popular glow-in-the-dark filaments include ¹ ² ³:
- eSUN PLA Luminous Green: Easy to print, environmentally friendly, and high strength
- Bambu Lab PLA Glow Yellow: With luminous powder, glows in the dark, and easy to print
- R3D PLA Ultra-Glow Turquoise: Strong glow-in-the-dark effect, high strength, and toughness

To enhance the glow effect:
- Use a lower fan speed and slower print speed
- Increase the wall thickness or infill density
- Expose the printed object to direct sunlight or UV light for better charging
- Consider using a green glow filament, as it tends to glow longer than other colors