lucid noir lueur - 3d printable tpu handbag

The lucid noir lueur is a stylish and practical handbag from my lucid noir series, fully 3D-printable in flexible TPU, which I designed and printed for my mums birthday.

After printing, simply fold the bag along the predefined lines, heat the corners slightly to set the shape, and snap the sides together. A bit of glue is needed to attach the closure to its predefined points, plus a few drops to secure the magnets (D15x2mm) and the sun (optional) in place.
The snap-fastener assembly makes it easy to disassemble and clean, while the durable TPU construction ensures a long-lasting, lightweight accessory.
You can easily color the lettering with any acrylic pen you like – just pick your favorite shade.
Designed for makers who love functional prints with a designer touch.

Your purchase gives you the right to download and print the design for your personal use only. You do NOT have permission to sell prints or redistribute the digital files in any way.

You need a printbed with at least 420x420mm.

For example:
- Elegoo Orangestorm Giga with 575 × 575 × 655mm
- Creality CR-M4 with 450 × 450 × 470mm
-Anycubic Kobra 2 Max with 420 × 420 × 500mm
-Rat Rig V-Core (500 mm) with 500 × 500 × 500mm
-Tronxy X5ST-500 with 500 × 500 × 600 mm
-Creality CR-10 S5 with 500 × 500 × 500mm

The printer must be capable of printing TPU A98 / A95 reliably over very long continuous prints.

First layer: 0.4 mm layer width. Not 0.01 mm more, not 0.01 mm less.

For the shoulder strap you need some supports and a brim of 2-3mm with 0.075mm gap

Set the parameters for the top and bottom surfaces, and for solid and sparse infill, to monotonic lines. Make sure the infill directions are set to 90° / 180°. Activate the setting “Rotate solid infill direction”.

Ensure that the first layer lines are printed from the lid to the bottom part before starting the print. If this is not the case, rotate the part or adjust your parameters accordingly.