Key ring display stand

Simple and versatile modular keychain display (printed in parts).

It is designed so that each part fits together well (if it is necessary to use negative horizontal expansion, it will depend on the calibration of your printer).

You can glue each part so that it is fixed or you can leave it like this and the arms will be able to move at your own discretion.

The model I printed (the one in the photos) has 5 arms (4 intermediate and 1 final) reaching a height of 30cm. Each arm has 8cm free to place many key rings and a stopper so they don't slip and fall off.

The zipped file contains:

_ Base

_ Initial column

_ Intermediate arm

_ End arm

!!! You can print as many arms as you want as long as the stability of the display is maintained. The display in the picture is stable and has plenty of hanging capacity so that quantity is what I would recommend.

If you liked it give me a like and if you did share me a make to see how it turned out for you.

Happy printing!

• Printing temperature: 200 °C

• Bed temperature: 60 °C

• Material: PLA black from Grilon3

• 3 perimeters

• 1.2 wall thickness

• Layer height: 0.24mm

• Filling: 10% or more

• Print speed: 40mm/s

• Smoothing: no