BattleTech Maxim Hover Transport

This is my version of the Maxim Hover Transport based on the excellent "Maxim Mk. II" model by Yakudami, who kindly gave me permission to share this model. Any tips you might want to give should go to them.
https://cults3d.com/en/3d-model/game/maxim-mk-ii

I made the rear rudders/stabilisers thicker to be easier to print, increased the front windscreen slightly and reduced the model size to fit on a hex base better. I obviously also changed up the weapons loadouts to match the earlier Maxims.

The Maxim is a well armed and armoured 50 ton battle taxi capable of carrying a full platoon into combat as speeds up to 129 kmh (8/12 movement). Included is the following variants:
Standard - 3x LRM-5, 1x SRM-6, 2x SRM-2, and 3xMGs
SRM-2 - same as standard but the SRM-2s are in the turret
SRM - 3x SRM-4, 1x SRM-6, 2 SRM-2 and 3 MGs
SRM-4 - 2x SRM-4, 1x SRM-6, 2 x SRM-2, and 3 MGs

Other variants might come in future or could be done by special request. Shown in the pics is the Standard and SRM-2 variants.
Note: all variants except the SRM-2 variant use the standard turret.

Printed on an Anycubic Photon M3
0.04mm layer height
sliced in Lychee
Sunlu ABS-like Resin (Dark Grey)
I rotated this model back about 22° before supporting.

This model is intended to be printed on a resin/SLA printer.