1:200 CM-170 Fouga Magister / CM-175 Fouga Zephyr

The Fouga Magister was a twin-engine jet for advanced training produced in the 1950s by the French Établissements Fouga & Cie.
In addition to France, the CM-170 served with more than 20 air forces, including Israel, Germany and Finland which produced it under license bringing the total of aircraft built to over 1000.
Armed with 7.62 caliber machine guns and a rocket launcher and bombs, the Fouga Magister fought in the Middle East and in the Salvadoran civil war, in the Western Sahara war and in the Congo crisis in 1961.
Thanks to its outstanding aerobatic capabilities, several nations have chosen it to equip their national aerobatic team.
The Fouga Zephyr, in service with the Aéronautique naval, was the variant modified for carrier operations.

Models: CM-170 Fouga Magister and CM-175 Fouga Zephyr.

configurations:
FougaMagister_0 clean (unarmed)

FougaMagister_1 clean with 2xMG

FougaMagister_2 with 2xMG + Matra F2 rocket pod

FougaMagister_3 with 2xMG + 4xT10 rockets + extra pylon for 2xrocket pod with 7 68mm SNEB

FougaZephyr_0 clean

Models scale 1:200 made to be printed with a MSLA or a FDM with 0.2 mm nozzle at this scale; for the model with the T10 rockets it is still recommended to use an MSLA printer even at this scale.

For other scales use the following values into your slicer:
for 1:100 use 200%
for 1:144 use 139%
for 1:200 leave 100%
for 1:285 use 70%
for 1:300 use 66%

At 1:100/1:144 it can be used a FDM printer with a 0.4mm nozzle.
Under 1:200 is almost mandatory a resin printer.

Print test:
1:200 made with a FDM with 0.2mm extruder.

This creation is reserved exclusively for private and personal use; redistribution of these files, as-is or modified, is not permitted. For further details read the relevant section of the Cults website by clicking on the LICENSE description.

ciao

Enrico