Vai al contenuto
Pubblicità

Sharky 40/50mm EDF Beginner Trainer, Two Tail Options

IMG_6329.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2088.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2089.png Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2087.png Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2452.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2453.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6330.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6331.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6332.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6105.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6106.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6107.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6108.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6109.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6110.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6329.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2088.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2089.png Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2087.png Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2452.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_2453.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6330.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6331.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6332.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6105.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6106.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6107.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6108.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6109.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
IMG_6110.jpeg Sharky 40/50mm EDF Beginner Trainer, Two Tail Options
Pubblicità
Fai un'offerta
Condividi
Aggiungi a
Make
?
Qualità della creazione: 5/5 (1 voto)
Valutazione dei membri su stampabilità, utilità, livello di dettaglio, ecc.
🏆 Migliore ?
Licenza
Utilizzi
Formato del progetto 3D
2 file (ZIP) Chiudi
  • Cults3D Sharky 40 50.zip
    • 2025-07-12 Manual Sharky 40_50.pdf
    • PLA_PETG_ASA Parts/SODYs3D Connector Round.stl
    • PLA_PETG_ASA Parts/Rim x2.stl
    • PLA_PETG_ASA Parts/SODYs3D Connector Flat.stl
    • PLA_PETG_ASA Parts/Pushrod closure smal.stl
    • PLA_PETG_ASA Parts/Landing Gear Main.stl
    • PLA_PETG_ASA Parts/Landing Gear L.stl
    • PLA_PETG_ASA Parts/Rudder Horn 2x.stl
    • PLA_PETG_ASA Parts/Landing Gear R.stl
    • PLA_PETG_ASA Parts/Pushrod Closure Big.stl
    • PLA_PETG_ASA Parts/Servo Holder Front Servo x2.stl
    • PLA_PETG_ASA Parts/Canopy Lock 1.stl
    • PLA_PETG_ASA Parts/Canopy Lock 2.stl
    • Fuselage Base/FUS 5.stl
    • Fuselage Base/FUS 2.stl
    • Fuselage Base/Wheel Holder Back.stl
    • Fuselage Base/FUS 1.stl
    • Fuselage Base/Canopy.stl
    • Fuselage Parts 50EDF/FUD 4 EDF.stl
    • Fuselage Parts 50EDF/FUS 3.stl
    • Fuselage Parts 50EDF/FUD 4.stl
    • Fuselage Parts 40EDF/FUS 4.stl
    • Fuselage Parts 40EDF/FUS 3.stl
    • Fuselage Parts 40EDF/FUS 4 EDF.stl
    • TPU/Tyre x2.stl
    • TPU/Back Wheel.stl
    • Wings/Wing L1.stl
    • Wings/Wing L3.stl
    • Wings/Wing L2.stl
    • Wings/Wing R3.stl
    • Wings/Wing R2.stl
    • Wings/Wing R1.stl
    • Wings/AIL L.stl
    • Wings/AIL R.stl
    • Tail/V-Tail/V ELE R 3.stl
    • Tail/V-Tail/V ELE R4.stl
    • Tail/V-Tail/V ELE R1.stl
    • Tail/V-Tail/V ELE R2.stl
    • Tail/V-Tail/V ELE L3.stl
    • Tail/V-Tail/V ELE L2.stl
    • Tail/V-Tail/V-Tail FUS 6.stl
    • Tail/V-Tail/V-Tail FUS 7.stl
    • Tail/V-Tail/V ELE L1.stl
    • Tail/V-Tail/V ELE L4.stl
    • Tail/Standart Tail/ELE L4.stl
    • Tail/Standart Tail/ELE L2.stl
    • Tail/Standart Tail/ELE L3.stl
    • Tail/Standart Tail/ELE L1.stl
    • Tail/Standart Tail/ELE R1.stl
    • Tail/Standart Tail/ELE R2.stl
    • Tail/Standart Tail/ELE R3.stl
    • Tail/Standart Tail/ELE R4.stl
    • Tail/Standart Tail/Rudder 3.stl
    • Tail/Standart Tail/Rudder 2.stl
    • Tail/Standart Tail/Rudder 1.stl
    • Tail/Standart Tail/ST FUS 6.stl
    • Tail/Standart Tail/ST FUS 7.stl
  • PROMO CODE for the SKYTrainer of 70.zip
    • PROMO CODE for the SKYTrainer of 70.docx

Scopri di più sui formati
Ultimo aggiornamento
Data di pubblicazione
Numero del progetto 2738877
Autore del progetto SODYs3D
SODYs3D

SODYs3D

Account certificato
Problemi con questo progetto? Segnala un problema.

Informazioni sul file della stampante 3D

Descrizione del modello 3D

See also www.sodys3d.com 3D printed planes

Join the Facebook Group sodys3d

There's a new and improved version - the SKYTrainer - just for your information!

The SHARKY EDF 40/50mm is a 3D-printed beginner trainer with excellent gliding characteristics. With a wingspan of 1120 mm, a length of 920 mm, and a weight of 540 g (without LiPo), it offers up to 15 minutes of flight time. Perfect for beginners and relaxed flying. You have two alternative tail units! Starting from 2025-06-09, Fuselage 3 and 4 will be available for a 50mm EDF (FMS/QX50). These were designed upon customer request and have not been tested from me yet!

Part List:

Materials

  • EDF Unit: 1x XFly 40mm EDF / QX50mm or FMS 50mm EDF

  • ESC: Suitable for the EDF unt

  • Servos:

  • 4x 9g Miuzei (Chinese metal servos) or

  • Corona Servo DS939MG II (recommended)

  • Accessories:

  • 2x 30cm servo extensions

  • Aileron linkage (based on preference)

  • 2x 1.2x690mm steel rods (V-Tail)

  • 2x 1.2x730mm steel rods (standard tail)

  • 1x 2x1000mm carbon rod (Aileron/Rudder/Elevator)

  • 2x 4x185mm carbon rods/tubes

  • 1x 2x300mm Carbon Rods for the Elevator

  • Landing Gear (optional):

    Wheel Rod 2x M3x24mm or 3x24mm carbon or steel wave

    Back Wheel 2x24mm carbon/steel rod

    Swing axis 2x 3x16mm carbon/steel rod

    Spring: 4x 15x2.5mm-16x3mm O-ring or rubber band/tension spring

Smoke Flight:

https://youtu.be/fxtOXi8Ufaw

Alternative Tail Unit:

https://youtu.be/9hgiCHT2QQk

Build Video:

https://youtu.be/JAvj8eFeon0

Impostazioni di stampa 3D

  • LW-PLA Parts: Print all LW-PLA parts (winglets and canards) with 5% infill for winglets and canards, 3% gyroid infill for other parts. Use 1 wall, 2 bottom layers, and 4 top layers.

  • PLA/PETG/ASA/ABS (CF): Use materials of your choice. My recommendation is at least 2 wall lines, 15-25% grid infill, and more for landing gear components.

  • TPU Tires: Print tires with 2 walls and 12-15% gyroid infill.

  • For up-to-date print settings recommendations, please check my website SODYs3D.com, where I continuously update these settings.

Categorie

Tutte le categorie › Gadget

Tag

Pubblicità

Vuoi sostenere Cults?

Ti piace Cults e vuoi aiutarci a continuare l'avventura in modo
indipendente? Tieni presente che siamo un piccolo team di 4 persone,
quindi è molto semplice sostenerci per consentirci di mantenere
l'attività e di creare sviluppi futuri. Ecco 3 soluzioni accessibili
a tutti:

  • PUBBLICITÀ: disattiva l'ad blocker.

  • DONAZIONE: fai una donazione tramite Ko-Fi Dona

  • PASSAPAROLA: invita i tuoi amici a scoprire la piattaforma e i magnifici file 3D condivisi dalla community!

La condivisione e il download su Cults3D garantiscono che i progetti rimangano in mano alla community dei makers! E non in mano ai giganti della stampa 3D o del software che possiedono le piattaforme concorrenti e sfruttano i progetti per i propri interessi commerciali.

Cults3D è un sito indipendente e autofinanziato che non risponde a nessun investitore o marchio. Quasi tutti i ricavi del sito vengono restituiti ai makers della piattaforma. I contenuti pubblicati sul sito servono esclusivamente gli interessi dei loro autori e non quelli dei marchi di stampanti 3D che vorrebbero controllare anche il mercato della modellazione 3D.