OKI 1120 Printer – Carriage Stabilizer Bracket

This 3D model is a replacement Carriage Stabilizer Bracket designed for the OKI 1120 printer.
It ensures smooth and stable carriage movement, extending the life and performance of your printer.

✅ Compatibility: Fits perfectly with the OKI 1120 printer model

✅ Function: Stabilizes the carriage and prevents misalignment during operation

✅ Installation: Simple and quick – no special tools required

✅ Material Recommendation: Print with PETG or ABS for best strength and durability

✅ Print Settings: 30–40% infill, minimal or no support required, horizontal orientation recommended

Ideal for home or office printer maintenance, this spare part provides a reliable and cost-effective alternative to the original bracket.

🛠️ Manufacturing & Post-Processing

Slice the model with the above parameters.

Print at 60 mm/s (slower speeds recommended for precision).

For ABS: use an enclosed chamber or draft shield to avoid warping.

Remove gently from the bed to avoid bending.

Optional: Light sanding or filing may improve fitting.

✅ Installation Instructions

Align the stabilizer bracket with the printer’s carriage rail.

Secure in place by gently pressing or fastening (depending on your printer’s design).

Test carriage movement manually before powering on the printer.

📌 Notes

Designed and tested on the OKI 1120 printer for a perfect fit.

Ensure you print with strong material if the part will face mechanical stress.

This model is intended as a replacement spare part, not an original OEM part.