Adattatore HelmX Sena30k/50s/20s per caschi HJC

HelmetX (HX) is a cross-brand intercom mount family of helmet adapters that enable mounting different brands of intercoms to HJC and Nexx* helmets in-place of the helmet's slot designed for their smart intercom. HelmX mounts were designed specifically for 3D printing, i.e., the snaps, chamfers, fillets and other local design features enable easy 3D printing, and provide a durable mount for everyday materials.

ℹ️ The title depicts which helmet and intercom adapter can be downloaded. See also the poster from the pictures section.

ℹ️ See other HelmX listings to download other HelmX variants available.

See Youtube video: https://youtu.be/shR4tseNFwA

HelmX family of adapters support the following helmets (other might come later):

HJC helmets:

• RPHA 31
• RPHA 60
• RPHA 71
• RPHA 71 Carbon
• RPHA 91
• RPHA 91 Carbon
• F71 Carbon
• i71
• F71
• i91
• F31

Nexx XCOM3 helmets:

• X.WED3
• X.WST3
• Y.100R
• Y.100
• X.LIFETOUR
• X.LIFECOUNTRY

Nexx XCOM2 helmets:

• X.VILITUR
• X.VILIJORD
• X.VILIBY

Nexx XCOM helmets:

• X.WED2
• X.WST2
• SX.100

and the following intercoms:

• Fodsports FX8Pro
• Fodsports/Ejeas V6 & V4
• Fodsports M1S PLus / M1S Pro
• Fodsports FX7
• Cardo Packtalk Pro/Ege/Neo/Custom
• Cardo Packtalk Bold/Black
• Cardo Freecom /Spirit
• Sena 60s/SF; 4 mounting variants; high and low as well as thin and thick intercom snaps
• Sena 30k/50s/20s; 3 adapter variants, i.e., low positioning as well as 2 high positioning variants (to avoid bumping the intercom to your shoulder which is a known drawback of this Sena intercom).

Update: for HJC-helmet adapters there is also an optional cable (usually the mic cable) routing included one can merge with the HJC-type adapter (in the slicer, see the video provided) and print out such a cable-routing variant.

ℹ️ There is also a User manual included in the download.

⚠️ License: License: Personal use only

You are allowed to:

• Print the model for personal use
• Modify the model for personal use
• Use it on your own helmet

You are NOT allowed to:

• Sell the digital file
• Share the digital file
• Sell physical prints of the model
• Use the model commercially in any form

Recommended 3D print settings

For best results, i.e., print quality, strength and looks, the following 3D print settings are recommended:

• Layer height: 0,12 mm; select High Quality profile in the slicer if available
• No. of walls: >=4
• Infill: 25% or more
• Print orientation: see the picture provided
• Supports: tree, slim
• Brim: yes

Materials

• PETG-CF: best option: strength and looks
• PETG: 2nd best option.
• ASA/ABS: can be used, but, user shall lower the fan speed as well as the printing speed to minimize warping
• PLA: not recommended due to low temperature resistance and being fragile meaning snaps might break easily.