Universal Over Door J-Hook – Coat, Towel & Backpack Hanger

Instantly add extra storage to any room with this Minimalist Over-the-Door Hook. Designed for convenience and modern aesthetics, this hook simply slides over the top of your standard interior doors—no screws, no drilling, and no damage to your woodwork. It’s the perfect space-saving solution for bedrooms, bathrooms, dorm rooms, or closets.

[Key Features]

No-Drill Installation: Instantly mounts over the top of your door, utilizing unused space.

Heavy-Duty Capacity: Capable of holding heavy winter coats, loaded backpacks, or thick scarves.

Secure J-Curve Design: Features a deep, sweeping curve with a slightly raised front lip to ensure your items stay securely hung without slipping off.

Low-Profile Top: The flat top section is designed to be thin enough to allow most standard doors to open and close smoothly without catching the frame.

[Recommended 3D Printing Settings]
For a load-bearing item like a hook, print orientation and wall thickness are highly important to prevent the part from snapping along the layer lines.

Orientation: Crucial: Print the hook lying flat on its side. This aligns the layer lines perpendicular to the weight of the hanging item, giving it maximum strength.

Material: PETG or ABS/ASA are highly recommended due to their durability and slight flex. PLA+ can also be used.

Walls/Perimeters: 4 to 6 walls. (Strength comes from the outer walls, not the infill!).

Infill: 25% - 40% (Gyroid or Cubic pattern).

Layer Height: 0.2mm for a good balance of strength and surface finish.

Supports: No supports required when printed flat on its side.