A.F.C. OSSY Shield Soccer Ball Lamp

It is a lamp in the shape of a ball with a lithophany of the A.F.C. OSSY soccer team crest.

There is also another file which is a base for posing the ball.

The ball has the hole to put in the electronics needed, it has a controller, battery and 16 colors with multiple modes to choose from.

For more information and models I leave the link to Instagram where we post everything we do:

https://www.instagram.com/en3dlaser/

The lamp is made so that it is not necessary to use brackets.

I use cura with two different printers, one is the anycubic Mega pro and the other an Artillery Genius Pro, For the printing parameters I use with 0,4mm nozzle for lithophanes I leave the curaprofile files for you to download.

On how to put the electronics I leave compressed images in RAR format to guide you, I put it in motion so that there are no lines on the ball, but you can do it pausing until you get looseness, watch out that when you put the electronics with the hot silicone you can tilt, so be careful and if it tilts put it back to stand and so on until the silicone hardens.

The link to buy the electronics is as follows:

https://es.aliexpress.com/item/1005003069067412.html?gatewayAdapt=glo2esp&spm=a2g0o.order_list.0.0.21ef194dNHceyI

For the wooden base they also sell the kit with the base, but I prefer to print it, I leave you the link and also the files in case you prefer to print it yourself:

https://es.aliexpress.com/item/1005003257853473.html?spm=a2g0o.detail.1000014.3.7ed04978HCkTqM&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.274735.0&scm_id=1007.40050.274735.0&scm-url=1007.40050.274735.0&pvid=fea26db1-4db3-4bac-b20d-9f96013c7027&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.274735.0,pvid:fea26db1-4db3-4bac-b20d-9f96013c7027,tpp_buckets:668%232846%238116%232002&pdp_ext_f=%257B%2522sku_id%2522%253A%252212000024886767066%2522%252C%2522sceneId%2522%253A%252230050%2522%257D&pdp_pi=-1%253B6.76%253B-1%253B-1%2540salePrice%253BEUR%253Brecommend-recommend