Vai al contenuto
Pubblicità

Baran Funko

Pubblicità
Fai un'offerta
Condividi
Aggiungi a
Make
?
Qualità della creazione: 0/5 (0 voti)
Valutazione dei membri su stampabilità, utilità, livello di dettaglio, ecc.
Licenza
Utilizzi
Formato del progetto 3D
32 file (STL) Chiudi
  • Armored_hand_left.stl 25.475246000000002 × 16.62116 × 41.370737000000005 mm
  • Base.stl 104.321704 × 97.02416400000001 × 22.071762999999997 mm
  • Body.stl 40.875378 × 30.215307999999997 × 88.379143 mm
  • Central_part_left_portal.stl 33.386888 × 28.941872000000004 × 47.030973 mm
  • Central_part_mid_portal.stl 32.117672999999996 × 17.480469000000014 × 53.058716999999994 mm
  • Central_part_right_portal.stl 30.005619000000003 × 28.080250000000007 × 47.828886999999995 mm
  • Dragon.stl 52.530682 × 76.551091 × 52.45765 mm
  • Hair.stl 109.980938 × 73.819974 × 97.146503 mm
  • Hand_with_sword.stl 30.007834000000003 × 39.380984 × 85.733464 mm
  • Head.stl 65.855827 × 59.986999 × 67.664871 mm
  • Left_flame.stl 76.691656 × 65.282614 × 58.229623 mm
  • Lightning's.stl 34.722899999999996 × 12.816479999999999 × 65.676554 mm
  • Lightning's_2.stl 24.500039 × 15.834907999999999 × 74.75698399999999 mm
  • Lightning's_3.stl 25.893177 × 19.586349 × 71.76285200000001 mm
  • Lightning's_4.stl 25.619591 × 8.494757999999997 × 60.687674 mm
  • Mid_flame.stl 65.115707 × 51.567505 × 68.972932 mm
  • Pauldron_left.stl 20.432420999999998 × 23.084459 × 25.875125 mm
  • Pauldron_right.stl 21.811878 × 27.706985999999997 × 26.230643 mm
  • Pelvis_left.stl 14.013912 × 17.292383 × 16.022325 mm
  • Pelvis_right.stl 11.435259 × 18.89278 × 16.059277 mm
  • Right_flame.stl 48.130716 × 55.436164999999995 × 63.781383 mm
  • Side_horn_left.stl 59.46909699999999 × 14.117579000000003 × 36.811623 mm
  • Side_horn_right.stl 59.469116 × 14.117643000000001 × 36.81203800000001 mm
  • Side_part_left_portal.stl 45.492321 × 40.911621000000004 × 65.255384 mm
  • Side_part_left_portal2.stl 44.85392 × 40.071200999999995 × 64.979201 mm
  • Side_part_mid_portal.stl 47.832161 × 20.161888000000005 × 70.686764 mm
  • Side_part_mid_portal2.stl 47.773264 × 23.205559000000008 × 70.859626 mm
  • Side_part_right_portal.stl 40.456244000000005 × 40.512173000000004 × 62.018076 mm
  • Side_part_right_portal_2.stl 39.794354999999996 × 39.99727299999999 × 63.070102999999996 mm
  • Tail.stl 38.641402 × 46.973350999999994 × 40.505714 mm
  • Top_horns_left.stl 31.896946 × 20.014902999999997 × 41.612162999999995 mm
  • Top_horns_right.stl 29.288816999999998 × 17.808082 × 43.173838999999994 mm

Scopri di più sui formati
Ultimo aggiornamento
Data di pubblicazione
Numero del progetto 4676351
Autore del progetto StudioMado
StudioMado

StudioMado

Problemi con questo progetto? Segnala un problema.

Informazioni sul file della stampante 3D

Descrizione del modello 3D

Baran, the Monarch of White Flames – Solo Leveling | High-Quality 3D Printable Figure

Bring Baran, the Monarch of White Flames from Solo Leveling, to your collection with this highly detailed 3D printable figure. Designed for anime fans, collectors, and painters, this fan-made model captures Baran's imposing presence with clean, print-friendly details that showcase his regal armor, commanding stance, and overwhelming aura as one of the most powerful Monarchs in the series.

Whether you're building a Solo Leveling display, painting a custom figure, or searching for your next 3D printing project, this model is designed to produce impressive results on both resin and FDM printers.

Features
High-quality, detailed sculpt
Optimized for 3D printing
Suitable for resin and FDM printers
Excellent for painting and display
Ideal for anime collectors and hobbyists
Recommended Use

This model is intended for personal 3D printing and display. Print settings may vary depending on your printer, material, and chosen scale. Supports may be required depending on your slicing configuration.

Keywords

Baran, Monarch of White Flames, Solo Leveling, Sung Jin-Woo, Shadow Monarch, Shadow Army, Kaisel, anime, manhwa, 3D model, STL, printable figure, resin print, FDM, miniature, figurine, collectible, anime collectible, fan art, painting model, display figure.

Disclaimer

This is a fan-made 3D model inspired by the character Baran, the Monarch of White Flames from Solo Leveling. It is intended for personal, non-commercial use unless otherwise stated.

Impostazioni di stampa 3D

This model has been optimized primarily for resin (SLA/MSLA) 3D printing to achieve the highest level of detail. It can also be printed using FDM printers with appropriate settings, although fine details may be less pronounced.

Recommended Settings

Resin Printing (Recommended)

Layer Height: 0.03–0.05 mm
Supports: Required
Orientation: Angle the model approximately 30–45° to reduce suction and preserve detail.
Resin: Standard ABS-like or Tough Resin recommended.
Infill: Solid (standard for resin printing).

FDM Printing

Layer Height: 0.12–0.20 mm
Nozzle: 0.4 mm
Material: PLA, PLA+, or PETG
Infill: 10–20%
Supports: Required
Print Speed: 40–60 mm/s (recommended)
Post-Processing
Carefully remove all supports after printing.
Sand any support marks if desired.
Wash and fully cure resin prints before handling or painting.
Prime the model before painting for the best finish.
Assembly

If the model is supplied in multiple parts, dry-fit each piece before gluing. A high-quality cyanoacrylate (super glue) or two-part epoxy is recommended for permanent assembly.

Safety Information
Decorative display model only.
Not intended as a toy.
Small parts may present a choking hazard—keep away from young children.
Follow your printer manufacturer's safety guidelines and use appropriate personal protective equipment when handling uncured resin.

Categorie

Tutte le categorie › Arte › Fan Art / Sculture e busti / Animali e creature

Meta tag

Tag

Pubblicità

Vuoi sostenere Cults?

Ti piace Cults e vuoi aiutarci a continuare l'avventura in modo
indipendente? Tieni presente che siamo un piccolo team di 4 persone,
quindi è molto semplice sostenerci per consentirci di mantenere
l'attività e di creare sviluppi futuri. Ecco 3 soluzioni accessibili
a tutti:

  • PUBBLICITÀ: disattiva l'ad blocker.

  • DONAZIONE: fai una donazione tramite Ko-Fi Dona

  • PASSAPAROLA: invita i tuoi amici a scoprire la piattaforma e i magnifici file 3D condivisi dalla community!

La condivisione e il download su Cults3D garantiscono che i progetti rimangano in mano alla community dei makers! E non in mano ai giganti della stampa 3D o del software che possiedono le piattaforme concorrenti e sfruttano i progetti per i propri interessi commerciali.

Cults3D è un sito indipendente e autofinanziato che non risponde a nessun investitore o marchio. Quasi tutti i ricavi del sito vengono restituiti ai makers della piattaforma. I contenuti pubblicati sul sito servono esclusivamente gli interessi dei loro autori e non quelli dei marchi di stampanti 3D che vorrebbero controllare anche il mercato della modellazione 3D.