👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇩🇪 País del usuario: Alemania
🌐 Idioma preferido del miembro: Inglés. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.
Hi Willie! You have some great models and we clearly share some interests! You are doing the things I hope to be doing as I advance in the hobby! I’m just starting out in 3d printing and design. Hope to graduate to jewelry making sometime in the future and always been interested in electronics and HAM radio although not licensed ( prior military electronics tech ) Hope to be able to visit Germany again after I retire for good! Fraternally! Kirk
Hi Kirk,
TNX FER NICE MSG. UR QTH? K
This is what I try to learn right now: Morse :) In that case abriviations.
Where do you yome from?
Fraternally, Willie
PM of "Friedrich zur Vaterlandsliebe" No. 278 i.O. Koblenz, Germany
Washington State, U.S. I've seen several systems for learning Morse, but it really takes diligence I think. Good luck with it! -k
Quelle longueur de câble pour la t2lt
Avait vous la description en pdf
P.brenier6 @gmail.com
What thing are you talking about? Cults doesnt show this to me. I published coils for various antennas - do you mean thoose? This designs will help you if you follow one of the many instructions, you find on the internet, on youtube for example.
Google and you find the lenghts for 10 m / 11 m / 15 m or even 2 m ...
As a simple rule I use: The top part 1/4-Lamba*0,96 the part with sleve about 1/4-Lamba*0,66
And check here for updates: https://www.thingiverse.com/thing:5897428
vy 73, Willie
I made a cube as described and published it on thingiverse. It will automaticly show up here.
I hope it fits to your idea (I am 14° in AASR - but came not across that symbol till now.)
I follow the REAA rite (Ancient and Accepted Scottish Rite)
The height of the point corresponds to half the height of the cube.
if the pyramid is 10cm high, the cube is 20cm high.
3Bises
But you can make it in one piece
Dear Sir
I'm from France, east of Charleville Mézières in the Ardennes.
I'm a beginner in 3d, and I'm looking for an STL of a cubic point stone.
Do you have this?
Thank you in advance
3Bises
Good Morning, name here is Willie. Can you explain to me, what you mean, when you say "cubic point stone". Can you give me an example or show me a picutre. May be, I can help. Cheers, Willie
Dear Sir
As you had made several stones (rough, cut)
I thought you might have the pointed cubic, which is the continuation of the previous two.
or maybe it has another name.
I don't know how to send you a photo.
It's a cube, with a pyramid on top.
3B
Ah ok - I googled and found this symbol within the frensh scottish rite. This is not familiar to us here in germany. But it is quite easy to drwa one. I just must know, how high the pyramid must be in relation to the cube.
Fraternally(?), Willie
Hi, I wanted to ask about using one of your designs to raise funds for a masonic lodge. Would you be apposed to that? I would consider paying for the rights to use it.
Hi - so who are you? And for wich logdge should it be? Regards, Willie
Hi,
What type of screws do I need for the G90 legs and where to buy?
Thank you
As I wrote 3 mm, a bit longer than the originals. I used (3x10). You will get them in any hardware store. Regards, Willie
Thanks for asking - no need to be quoted. I glad, if the design was helpful. Regards, Willie
Hi, i use your pull-relief design for an arduino based latency device in my bachelor thesis. I hope thats all right. If you would like to be quoted by your full name and not by your username, feel free to contact me: antonia.freecad@mailbox.org. Regards :)
Hi, looks superb. I downloaded the v3 file and ask professionals for pricing. to my surprice one piece was about 20US, so in my understanding about 3 hours of print?
I am writing about rally obedience holder
3 hours sound reasonable. I use I found out that stronger wind is a problem with this holders - even when hold down with a nail (as for use with tents).
what about turned T shape of the holder with some nails on bottom?
Muy buenas, te escribo ya que quería cambiar los botones del pulsador para muebles camper, ¿el arete que tiene fuera no lo tendrás también diseñado no? ¡Muchas gracias y un saludo!
Hola buenas tardes, espero que estés bien, te quería consultar si tienes las medidas o modelo fusion 3D de el modelo que hiciste, para ocuparlo en mi rancho que justamente la madera que tengo no es la mejor en estos momentos y el sensor de humedad es bueno para la medición de mis maderas, adjunto enlace. https://cults3d.com/es/modelo-3d/herramientas/co2-detector-arduino-esp-display-and-sensor. Saludos cordiales y atento a tus respuesta. pd: dejo mi correo eduardojimenezj1955@gmail.com
translated to english: Hello, good afternoon, I hope you are well, I wanted to ask you if you have the measurements or the 3D fusion model of the model you made, to occupy it in my ranch, precisely the wood that I have is not the best at the moment and the humidity sensor is good for the measurement of my woods, attached link. https://cults3d.com/es/modelo-3d/herramientas/co2-detector-arduino-esp-display-and-sensor. Kind regards and attentive to your response. PD: I leave my email : eduardojimenezj1955@gmail.com
Tut mir leid, ich spreche kein Spanisch und mit Hilfe des Google-Übersezters ist es mir nicht gelungen zu versetehen, was Sie möchten. Ich habe nun noch einen Freund gefragt, der Spanisch spricht und warte auf Antwort.
Sorry, but I do not speak Spanish. And even unsing the google-translator, I was not able to understand, what you want. I send your messege to a friend who speaks spanish - but I´m still waiting for an answer.
oh! the language barrier...a complicated situation and sad situation, i understeand..., No worries, i want to know if you have any 3d model of the "Co2 detector" for 3d printing, because i have a ranch and i need a humidity sensor for my wooden materials. And i ask you because , when i click the download botton, they are only images of the "Co2 detector" model, and there aren´t any archives for download the model and transfer it to a 3d software that i have for printing.
(the software is called fusion 360).
My Kindest regards and i´ll be looking forward to your answer. PD: I leave my email and the link of your model:
eduardojimenezj1955@gmail.com
https://cults3d.com/es/modelo-3d/herramientas/co2-detector-arduino-esp-display-and-sensor.
For measuring just the moisture (of the air) you could use a much simpler design with just the DHT sensor and change the code acordingly. Or buy a wifi-thermometer/hydrometer - for example this one:
I don´t have a fusion file as I contructed the housing with freecad. If any help, you will find the freecad-file here: https://www.thingiverse.com/thing:4650900/files
Really thank you! best regards from south america
hello, i have krups coffee grinder GVX 2, and the plastic teeth part is broken. I have downloaded the draeing to make new part out of 3D printer you created, but it is also broken, the drawing some how not do able, perhaps you can check the file available for download, or I can have fresh copy from you?
I downloaded the STL and put it into Cura - everything looks fine. But - this is a mechanical part, that needs some strenght! Try to tilt it on the bulidplate, so that the surface of each layer gets bigger. You will need support an cleaning, but it will last longer. Mine is fine after a longer time and I chaged the grinding settings almost every day (filtercoffee and espresso).
Also clean the machine as suggested - things will operate more smoothly and you will need less power to turn the knob.
Hallo , könnte ich die Lizens bei dir erwerben für Geschäftlich die Schranktürdämpfer für Camper Van zu Verkaufen
Im Prinzip gerne. Mach einen Vorschlag.
Hello I downloaded your file and I seem to have issues printing when I slice it the time shown is 0min 0g I think its telling me its to small because it only changes the time after I scale it to an exaggerated size. is there something I can do I would appreciate some input thank you.
I can not test it, cause I can not see, which design you are talking about. If it´s a ring or a brooche I´d probarbly made it with blender. When importing into chitubox i.e. you have to scale it up by factor 10 (1000%).
Could you design a coin for me by chance?
I can pay
Maybe, maybe not. What kind of coin should it be? If I like the idea I could give it a try.
This was a "Thing in Progress" - Cults only imported the first version. I did an update now.
Oh, my fault. Scale it up by factor 10 - or download it again, I uploaded a upscaled version.
Willie
Hi
The drop stop sepia is very small on the stl file,What size do you print it in?
Thanks
Mattias
Buenas tardes Seria ideal incluyeras en el diseño de la piedra cubica masonica el simbolo de la escuadra y el compas