I buy this part but it's not the good part I think it' the other side of the car. I have you an another ?
- 0 me gustas
- 9 Diseños
- 110 Descargadas
- 16 Seguidores
Hobbyist CAD modeler and 3D printer with a strong need to make automotive parts.
👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇫🇮 País del usuario: Finlandia
🌐 Idioma preferido del miembro: Inglés. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.
Escribe tu mensaje:
28 commentarios
Hello, you can just use the mirror setting in the slicer with the 3D model to print the other side. And regarding your earlier message, sadly i don't have the front covers so i could 3D model them.
- 0 me gustas
hie
have you only this part because I have 4 parts 2 lefts and 2 right ?
thank you for your answer
best reagards
- 0 me gustas
I can't pay €20 for a 3d model for the samsung vcr I need to 3d print your model so I can bring my Samsung VCR back to life and watch my vhs tapes
- 0 me gustas
Hi. How much filament will the "TSW wheels Center Cap and Nut" need to print and what filament will be needed.
- 0 me gustas
O sino el monofaro del Ibiza kit car, gracias
- 0 me gustas
Sería posible conseguir el faro morette para Ibiza 6k? Garcias
- 0 me gustas
Hola. Necesitaría una tapa delantera derecha de los faldones de un xr2i. Cómo hago para hacer el pedido. Gracias
- 0 me gustas
Hola buenos dias, preguntaba si con el archivo de las taas de las taloneras del fiesta xr2 estan las 4 tapas, ya que lleva 2 alante y dos atras.
- 0 me gustas
Hello pale how are you? my name is Sebastian im from argentina. im looking for the centercap and nut for tsw wheels. I have another model of wheels but i suspect they are the same. can you tell me the outer diameter of the cap and the inner diameter of the nut just to be 100% sure its the same? is this 3 separate pieces? I dont have a 3d printer so i would outsource that. Also just for you to know chat gpt brought me here, future is now hahaha. Thanks a lot in advance
- 1 me gusta
I'll start by apologizing for my poor English, lol... Could you tell me the external measurements of this part? Before I buy the file, I wanted to be sure that I'll be able to modify it for the ESCORT MK4... which has a very similar headlight, but I have the impression that it's a little bigger... If possible call me at marcelozfold@gmail.com - Tks!!
- 0 me gustas
Hi, do u have Suzuki GSXR 1000 Velocity Stack for model 2018? thanks
- 0 me gustas
Hi, sorry i don't have a model from those. I could model those if i could get one onto hand :)
- 0 me gustas
Hola! Las tapas para fiesta xr2i son delanteras y traseras?
- 0 me gustas
Hola, lamentablemente no tengo cubiertas para los faldones laterales, solo las que van en la parte trasera.
- 0 me gustas
Hey I’m interested in that noco battery box. But I’m looking for one that’s encloses the whole battery with some vent ports. I drift my car and the battery is required to have the terminals covered. The noco box is way too big
- 0 me gustas
If you are inquiring a custom design, please contact vartapower123@gmail.com with more details :)
- 0 me gustas
i have a problem with a hole in Frame 2 can you send me an email fliibek@abv.bg
- 0 me gustas
Answered :)
- 1 me gusta
I would like you make this morette for Escort mk4, im from Spain but im sure you will get millionaire in UK market, same desing like fiesta but for Escort mk4, because original Escort mk4 morettes there isnt space for the indicators ;( thx for Your work
- 0 me gustas
I could do that, if i'd get a 3D scan from a mk4 Escort headlight assembly and the chassis part where it attaches to. Otherwise it is pretty much impossible.
- 0 me gustas
Bonjour mon ami ça va ?!!
Est il possible pour toi de modélisé un cache de bas de caisse pour l’avant ?!!
Avant droite si possible, j’achète direct !!!
Merci l’ami 😁
- 0 me gustas
I am interested in your mark 3 fiesta morette style headlight how much would the pair cost me please also have you finished the upgraded model yet ?
- 0 me gustas
Hi PALEPPP, I could be interested by your model of headlight for Ford. But, before buying ot, I have some questions. What material did you use ? I was thinking about PETG or ASA. How did you orientate your part for printing? Visible face down (a lot of curve) or up ( a lot of support). Thank you.
- 0 me gustas
Hi, model is split into 2 parts due to small bed size and i printed it the split face facing the bed. So you can print both sides at one time. I used PETG, but it is not sufficient to withstand the heat what comes from the halogen headlight. But i think with LED bulbs there is no problem. The model is very thin from the top part of the headlight. Im working on a completely new model which will be much better in every way, but it is work in progress still. But i will give it for free for everyone who bought the headlight model already.
- 0 me gustas
Hola buenos días te comprado el diseño me lo e impreso en ABS pero no localizo los reguladores de la parte inferior de que modelo son
- 0 me gustas
hola, he comprado el modelo para el FORD FIESTA XR2I y en la descripción pone que viene en piezas, pero sólo me descarga el modelo completo el cual no me cabe en la impresora.
- 0 me gustas
Hi, you have to split the object (model) in slicer to get it into parts.
https://help.prusa3d.com/article/split-to-objects-parts_1751
- 1 me gusta
Hello im having a problem with this modelhttps://cults3d.com/en/3d-model/various/ford-fiesta-mk3-morette-style-headlight
Whel i slice Frame 2 a hole appears in the model
If you can contact me via email fliibek@abv.bg or telegram or viber so i can send you some images
Here is my phone number+359888927232
- 0 me gustas
Hello, i sent mail to that address you provided.
- 0 me gustas
Hello! I was precisely looking for Morette models for Citroën BX like the ones in the image. Would it be possible?
Thank you . https://ibb.co/0jKFyxV
- 0 me gustas
If you can get 3D scan from the original headlight or the Morettes, it is possible. Send an email to vartapower123@gmail.com and let's take a closer look.
- 0 me gustas
Thanks for responding, I don't have a 3D model, I physically have the Morette headlight on my table to try to fix it.
I tried a scanner with iPhone but it was not successful.
I was thinking of making an image with the measurements and sizes of each part but I understand that it is not very useful
- 0 me gustas
Salut je voudrais savoir quelle est la taille de douilles svp merci ?!
- 0 me gustas
Hey what is the size of the sockets pls*
- 0 me gustas
What's up friend, sorry for the inconvenience, I bought your file of the tsw rim centers, but when I pass it to my software I can't print only the nut file, do you think you can send me the pure nut file? https://cults3d.com/:1123572
- 1 me gusta
Hello, you need to split them into separate objects in slicer software. Atleast in Prusaslicer this is possible. But i can do that if you cannot get it split. Send me an email to vartapower123@gmail.com so i can send the file for you
- 0 me gustas
Hello, i have been trying to contact you as i have some questions regarding this model, i would like to buy just would like to discuss some things with you