275 commentarios

Hello, do you still plan on reinforcing the Flexi Tarantula? It's been a month since your last reply.

Hi - I am trying to print the NICE PEGASUS FLEX and I am getting an error 6 non-manifold edges and it was requiring supports. Can you please review before I print. Thanks

Hello, do you have any news about reinforcing the Flexi Tarantula? https://cults3d.com/en/3d-model/art/nice-flexi-tarantula

No vendes alguna membresía me interesan varios diseños

Hi, can you make me a gnome similar to a teddy bear? Christmas style maybe? Thanks Eleonora

Hi there! For your "nice flexi monster" download, would it be possible to add a couple of loops to the top of the head, so it looks like this characters girlfriend? If not no problem at all, just have a jealous child at home now :)

Huge fan of your work, have probably downloaded like a dozen different ones already! Keep up the great work!

Hi there! I had gotten your Tarantula V2 model from Patreon a while back and printed a few for my nephews, but they usually break the legs easily. Would it be possible for you to make the leg joints a bit thicker? I was hoping I wouldn't have to scale the entire model to achieve that, as the original size is quite nice.

Hi. How much would you want for a license for 10 models so that I could sell them?

Hello it won't lete buy your projects
...how do I buy the articulated animals

Hello, I saw last week you had a killer hornet (Silksong 2 main character) model. Are you going to put it back on your collection one day or not ?

And I have another problem. Blue one has layer shift on bambu studio. Different scale doesnt work. I couldn't find any solution.
https://ibb.co/B5Z7w3nf
https://ibb.co/WQbVgFL
https://ibb.co/hFwNqNz5
https://ibb.co/DPqNN4Y8
https://ibb.co/xtDxqfY8
https://ibb.co/nNhPpJLG
https://ibb.co/r1ZKvKh

A few days ago, I purchased the “Nice Bingo Dog & Nice Blue Dog, Multicolor 3MF” model. Could you share the STEP or other CAD file of the model? I’ve run into a few issues.

First, I have two A1 Combo printers and I’m knowledgeable about 3D modeling and printing. Before contacting you, I tried different remedies, but the problem persists. Due to the model’s design, the area of the hands that touches the build plate is small. This is a major problem because the hands wobble on the bed and end up knocking the print off the plate. Even at 100 mm/s, it still comes loose from the bed. Since there’s no hardware issue, I considered a software-side fix by adding a brim; however, a full brim caused the blue surfaces on the base to be printed over by the white color. Adding a brim specifically to the hands partially solved my issue, but created another problem.

The other issue is the amount of filament wasted due to the very frequent color changes. Even after scaling the model down and running a flushing object calibration, it still consumes too much filament. My initial plan was to print a single test, but considering the cost, I decided to print more than one. With brims on the bed, the parts ended up touching each other (as mentioned above), which made it easier for them to pop off the plate.

From my experience, I would get safer results by printing the model in several pieces. That’s why I’m asking for the CAD file.

hello! i hope this message finds you well. Your little flexi beetle i printed but for some reason its little legs were stuck together and when i tried to "flex" them they broke. seems the joints were to close to eachother and they kind of printed as a piece. any suggestions? thanks in advance !

Hi!
I really like your design and I’d like to purchase it.
Before buying, I just wanted to ask — is it allowed to use this model for commercial purposes (for example, 3D printing and selling the prints)?

Thank you!

Hi!
I really like your design and I’d like to purchase it.
Before buying, I just wanted to ask — is it allowed to use this model for commercial purposes (for example, 3D printing and selling the prints)?

Thank you!

Hello Angel! I’m going to comic con and would like to hand out some of these to children in keeping with my costume. Is that permitted as I will not receive financial compensation? Thank you!

Hello.
If you buy the file, can I sell the printed parts?

Heya, Love the new plane :) just FYI the wheel "axles" are a little thin, the rear one snapped when freeing up the wheel, one of my printers must be just out and it needed freeing, but it wasn't that tight.
Cheers
Chris

Hola,
¿Podrías enviarme nuevamente tu modelo Pegasus?
El que te compré no funciona, el pulsador se queda atascado.
¿Puedes mandarme la nueva versión a mi dirección de correo electrónico?

He visto todas tus últimas creaciones, ¡son geniales!
Hoy acabo de comprarte, para la gran alegría de mi nieta, ¡el cerdito, la hormiga y la tortuga!

Hi, can you create a figure from a picture ?
I’m searching for the Coachman from Pinocchio, and haven’t found it anywhere 🙂 so I was thinking if you are able to create it🙏 I’ve the picture
Cheers Britta

HI mate, I have tried your dragon and RH leg seems to have small sections missing

I accidentally downloaded the articulating flying Pegasus twice, how do i undo that?

Do you have a myminifactory page?

I have an issue with the Bluey model. The horizontal bar between the two legs is a little thin. I get flexure between the legs, enough that the two feet touch after a little use. Would it be possible to increase the diameter by 50% as it is doing all of the heavy lifting - literally.

Hola amigo.. quiero comprar varios diseños suyos.. algun codigo de descuento??