92 commentarios

Yes, a corrected version will be available tomorrow; these types of errors sometimes occur in older versions of Blender.

Hi, I'll upload some files later with some corrections. The other STL files are corrections for two other 3D printing programs: Cura and another one.

I've uploaded several wild girls, what model is she?

SNAKE ANTHRO VIPER Model

I'll actually do another one tomorrow in a different pose, I'll do several, do you want one with a male genital masturbating?

Yes please, female with male genitials masturbating but with mouth close if possible as printing those tiny teeth’s will be nightmare

I am preparing two figures in different poses: one with human genitalia, another with animal genitalia, and another with reptile genitalia.

Oh I can’t wait to see the ❤️

Today I'm uploading the first one with human genitalia; it will be ready in a few hours.

She’s beautiful ❤️ when you plan to upload other ver? I will just see which one will fit better but definitely I’m buying her. Monster cute futas are always welcome here.

Today I'm uploading the other version with animal genitalia. I'll see if they sell by Monday; if not, I won't make another version or another furry one because they don't usually sell.

Hopefully that will change but for now I will wait to see which ver I will choose. I’m super excited she looks so hot

Sure, tomorrow I'll upload a version like that, maybe I have to upload a Romulus alien asshole.

I will upload a larger one. Apparently there is still an error that occurs in my version of Blender when exporting.

I'll see if I can try to make one from Yubel next week, although I've never made a deckbox, just a pyramid of light box.

That'll b cool! Been looking around for one, but it be the 1st one. Asked about making a deck box, that has detachable yubel wings that can be used as a a way of holding it up as well. And also has yubel on the front to kinda give away it's made for it, lol. Was curious how hard that is if you can't use 3d modeling software.

Tomorrow morning I'll check the files, if you have any questions, don't hesitate to ask.

Okay, i appreciate it! I can kinda navigate the the files that dont show until i slice, but with file five saying corrupted cant load to cura, i wanted to see what was going on

I checked the 5th and if there was an error in the mesh, I'll upload that piece now and let me know anything.

Ok, will you let me know when it's ready to go? And I'll let you know if it works after I download it again.

Ready, it's uploaded, check that piece to see if it's fixed.

It currently doesn't have the option to download any of them. It just says slice now. Hitting the download all button on the top after almost finishing download with fail.

My computer just died, lol. I'll have to try again tomorrow after work. I am really looking forward to the model! It's my 1st time using cult, so it may be user error, but it's as of rn, not letting me download. But I'll check back tomorrow and see if it is working again

When I was new it also happened to me, in fact one never stops learning, sometimes the programs are not all compatible and one must master each area, although now my printer is dead due to an accident due to a power outage.

In any case, if the download fails again tomorrow, I will upload that piece as a secret model and send you the cults link.

Okay. I hope it'll fix itself with some cool time after the re upload. I was exploring ur channel while waiting, u got some cool stuff with Zelda, Yugioh, and several others I'm very much interested in. Definitely gonna be a follower and try to get some of the other stuff I like as well. If u happen to do figures of the dark magician/girl stuff. That be something awesome! Lol. I thank u for a pleasant 1st time use of this website. It was good

UPDATE: I wanted to let you know, that the file does work now. you do have to hit download all button to get them. the individual download buttons still dont appear on the page, but was able to do the print ok. which is awesome

Great, send photos to my Twitter if you have any, I have other content there.

https://x.com/matterrazti

What design is it? I sometimes make replicas of figures.

it's the utena one that has an picture of the copied figure

Yes, but I made that one from scratch. I used the image as a reference since I wanted to make it as a figure, although I still haven't found one that makes a make. I tried to make it as similar as possible, although it has a couple of errors.

the figure company's don't like ppl making exact copys of their figure's and selling it without a license. if it's for free it's maybe less of a problem but maybe still. if it's a copy of the figure but then with some clear adaptations it shouldn't be that big a deal i think. even if you redesigned it from the ground up. maybe just change something about it so they can't say you are copying them. i'd say you made it a bit to good since it looks so much like the official one haha, (i have the official one)

just saying be carefull, i like the other designs of utena though. might make one of those once i get my resin printer. not sure if i can get it nice enough with one of my fdm printers

Do you have the original? I'd love for you to have my version. I'll make it available for free to see if I can improve it, and you can tell me about any flaws. I've been trying to get a figure distributor as a designer for a while now. Knowing what people think would help me improve.

i have the original since i collect figure's, also been wanting to print and paint my own but haven't gotten around to it (have all the painting stuff cause i also do modelbuilding) if i get around to making a figure i could print it and give you my opinions on it. but i feel like i'd need to have that resin printer first so i need to save up for that first. fdm just doesn't give the amount of fine detail i'd want on figure's (most of them at least) so i'm not a figure distributor

When you have the printer, let me know so you can test some figures that I'm making. I also have a video game project and I'm making figures at the same time. It's called Killing Bites, from a manga and an anime. Sometimes the mangaka shares the designs that I make, although most of them are in beta. I'd also like to know what people think about it.

i looked at your killing bite's figures as well, i've seen the anime (and i like it)

I love that anime, I would have liked a second season, that's why I'm making a video game and a series of figures, one was one that was originally canceled, the video game would have characters from the manga like Kuroi Tasuku among others, I haven't released that figure yet.

Yeah I would've liked a s2 as well. I don't know much about the Manga though. I watch a load of anime, but only a few Manga ( matou seihei no slave currently)

hola claro puedes vender mis modelos con esa condición, igual te quedo genial el pintado y los detalles que les agregaste

Hello, I will send you a link in a few hours so you can download it.

https://cults3d.com/es/modelo-3d/arte/garbara-4ad54ccd574c86cc8867

Hi, I have the diffuse texture. Do you need the obj file? So I can add the texture.

I would be grateful sir

Hi, that problem also occurred in Cura. The solution in that case was to reset the scaling and scale both. I'm still going to upload a file in one piece so it can be divided in the same program. It's likely that the version of Blender I use is incompatible with some programs.

Hello! Thank you for the quick response! I'll watch for the one-piece file to be uploaded.

I uploaded the model in one piece to separate from it, let me know if it works for you, I'll also upload another one in a few hours in one piece

Yes, in that one, both pieces are the same scale when I open them in the software I listed above. Thank you!

There are some in 2 and 3-piece sets, others in just one. Are you looking for a specific one?

i messaged you on insta as well, Im looking at the 1954 and the godzilla 2000

https://cults3d.com/es/modelo-3d/arte/godzilla-1954-3-pieces I have uploaded the 1954 one in 3 pieces. Any questions, please don't hesitate to ask.

If you dont have time to see or fix this model could you at least refund me ?

Sorry, I forgot to reply. I'll upload a correction in a few days. I'll refund you for now.

Level 1 sword design ready, hope you like it

Yes, perfect, I already checked it. It looks good, although I would like more details highlighted in the model, as seen in the first image where it has the texture. All that's missing are those details on the handle, such as the leather wear, and on the blade, so that it has the same level of detail as the level 5.

And I also think it should have a little more depth around the eye area so it stands out more. Adding those details would be perfect.

Ready, I corrected some more things

Yes, thanks, I've already downloaded it. Please let me know when you've completed the other levels.

yes

great, can't wait! will you be making it any time soon?

https://static.wikia.nocookie.net/seinen-heroes/images/d/d5/InjusticeBatmanInsurgancy.png/revision/latest?cb=20231202090904
is this?

or this https://oyster.ignimgs.com/mediawiki/apis.ign.com/injustice-gods-among-us/a/a9/Batman-full_0_0.png?width=640?

yep the second one. this is a much clearer and full body image:
https://videogamefan.fandom.com/wiki/Batman_(Injustice:WOTG)?file=BatmanInjustice.png

hope this could be helpful:)
https://www.deviantart.com/gizmochillin/art/Batman-injustice-poses-390144093

yes tanks

Sure, it will be available in a few days.

It will be available soon. I'm finishing it. Would you like any pose besides the original figure's pose?

You could use the original pose, there's no problem

And is it full body?

yes

https://cults3d.com/en/3d-model/art/godzilla-1957

pack 1955 - 1957 https://cults3d.com/es/modelo-3d/arte/godzilla-55-57-pack