9 commentarios

Hey man, hope you´re doing well
I tried downloading the Fusion 360 files for your parametric coin sorter but when I click on the link it says that I have no permission to the files. So I was wondering if you deleted the files or restricted the access and if so I would like to know if there´s a way to have acces to them

Thanks in advance

Not sure if my last message went to the right place.
Having a problem with the Klein Bottle vase.
when I slice it I get what appears to be under extrusions and splits in the gcode preview, and those defect are faithfully reproduced when it prints. Re-sliced, did the same thing. Tried a different slicer, better but still some artifacts on the sides of the top loop and on the "hips" of the main bottle.

Any one else having problems slicing this? Any setting to be avoided or that help?

Hi Pentlandesigns, meanwhile congratulations for the drawing "Parametric Coin Sorter" ....
I printed the 6 coins version, both with Sleeves set to 0 and at 1. Unfortunately in the version with Sleeves set to 0 the coins all come out of the base, of any size and/o value (5c, 10c, 1 € ...).
In the version with Sleeves set to 1 (therefore printing another base), finally the coins do not come out but, in some Sleeves the coins do not flow well by remaining blocked and with difficulty to let them out again. Could you tell me how I can improve the Sleeves?

I following your video, in Fusion360 in the parameters I set the following values:
Sleeves 1 = 25.75
Sleeves 2 = 24.25
Sleeves 3 = 23.25
Sleeves 4 = 21.25
Sleeves 5 = 22.25
Sleeves 6 = 19.75
CoinSlots = 6
HoleTolerance = 0.75
SleeveThickness = 1
BaseHeight = 80
DistanceFromCenter = 32.5
Sleeves = 1
ThickestCoin = 2.38
SmallestCoin = 19.75

Thanks in advance

Hi,

How are you? Can you contact me via email - juodasplugas@gmail.com ! I have a business offer for you, let me know if you are interested?

Kind regards

Hi,

How are you? Can you contact me via email - juodasplugas@gmail.com ! I have a business offer for you, let me know if you are interested?

Kind regards

Hey mate I'm a Electronics engineering student in New Zealand. I have modified your Rick and Morty Spaceship, and turned it into a side table lamp.
a few people had asked me about it, so I was wondering if you wouldn't mind if I put up the modified stl files?

Thanks

how do i assemble the v2 slim wallet

Hey there,
Just wanted to let you know that we have released our latest design, a set of 3D printable headphones!
The head(amame) have taken a year to design and we are super excited to see how you like them.
As a previous purchaser of our Nintendo Switch Grips, I wanted to make sure you got a chance at our launch discount.
All the best,
Vector Finesse.

seeking your contact info!

Hey Pentlanddesigns, your designs are really nice. You are really excellent designer. I wish i can get your email info!, hope I'll be in contact with you.