47 commentarios

Hi mursi2 👋

The 10×10 model is printed as a single complete piece, no assembly required 🧩✅

Before printing the full-size model, I highly recommend printing the test files I included 📄🖨️ This helps fine-tune your slicer settings and ensures the best results. I have also added my recommended printing settings ⚙️

Regarding print time ⏱️, I can’t give an exact estimate since it depends on many factors such as machine, slicer settings, layer height, speed, and infill. On one setup it could take around 70 hours, while on another it could take closer to 30 hours 🔄

If you have any other questions, feel free to reach out anytime 💬

Best wishes,
NirNova98 🌌

Hey igor1111ry 👋

Thanks for sending the image — I see what you’re looking for. The type of design you’re requesting (hinged, separated parts based on an existing sculpted figure) isn’t something I’m able to create. My work is focused on 3D modeling, not sculpting or re-building characters into articulated pieces.

Also, when you continue the conversation, it really helps if you reply in the same thread instead of opening a new one — it keeps everything much easier to follow 😊

If you ever need help with something that fits within my style of models, feel free to reach out!

Best wish,
NirNova98 🌌

Hi dianawilson2 👋

Thanks for reaching out, and I’m sorry the print gave you trouble 😅
This kind of issue can happen with different printers or slicers when the settings don’t match the small gaps between the parts. Things like nozzle size, wall settings, or tolerance adjustments can cause the pieces to either fuse together or fall apart.

That’s exactly why I included the test files — they help you check if your printer’s tolerances match the model before doing a full print 👍
For best results, make sure to stick with the print settings I recommend for each design, since every model has its own ideal setup.

For example, depending on your printer you may need to slightly adjust:
• Wall / line width
• Horizontal expansion / XY compensation
• Flow calibration

These small tweaks help ensure the parts fit properly without being too loose or too tight 💬

Best wishes,
NirNova98 🌌

Very welcome mate! 🌹

Just one thing,
As I wrote above in the tip section:

“If you're continuing a conversation, please reply within the same comment thread instead of starting a new comment section. This keeps everything organized and easy to follow. 😊”

Stick to that friend it helps a lot 😆

Hi Ghost06 👋

Thanks for reaching out!
I don’t have access to the payment system on Cults, so unfortunately I can’t see or troubleshoot card issues from my side 😅

The best move would be to contact Cults3D support — they can check what went wrong with the Vanilla Gift card and help you get it sorted ✅

If you need anything else from me or have questions about the Mega Gyro Fidget, I’m here! 💬

Best wishes,
NirNova98 🌌

When slicing it, it looks normal, but then after I save it and pull it back on the slicer, it for some reason has left off the top layers that make the ledge stopper thing.

I sliced it directly from the site rather than downloading the file and it seems to have sliced correctly this time. Fingers crossed!

Hi HayBaeBae 👋

That’s definitely strange — sounds like something went off during slicing 🤔
But I’m glad to hear it worked properly after slicing directly from the site! 🙌

Sometimes slicers glitch or miss layers during import, so re-loading the file fresh usually does the trick.
If anything else acts weird or you run into another issue, feel free to reach out — I’m happy to help anytime 💬

Best wishes,
NirNova98 🌌

Hi antn3 👋

Sorry to hear about the printing issues 🛠️
The test files are meant to help you confirm everything fits correctly before moving on to the larger prints, if the test piece doesn’t fit, the full model will likely have the same problem 📏

There’s also a known issue where different printers and slicers handle tolerances differently, which can affect how the locking parts fit together. I’ve listed some helpful adjustments on the design page - look for “XY Hole Compensation” and “XY Contour Compensation.”
Tweaking those settings should help get a proper fit ✅

If you run into any other issues, feel free to reach out anytime 💬

Best wishes,
NirNova98 🌌

Hi shaebird 👋

Sorry to hear about the slicing issue 🛠️
I tested this design in both Cura and FlashPrint 5 and didn’t run into any problems, so it’s most likely something in the slicer settings or setup ⚙️

I’d suggest re-downloading the file and checking that it’s sitting on the build plate. If it still gives you trouble, let me know which slicer you’re using and I’ll try to help 👍

Best wishes,
NirNova98 🌌

Hi avalero2 👋

Sorry to hear about the printing issue 🛠️
It’s generally not recommended to resize the design, as it can affect proportions, thickness, and how the parts fit together 📏
I’d suggest printing it at the original size for the best results ✅

Before starting larger prints, it’s a good idea to try the test file first to make sure everything works as expected 👍

If you run into any other issues, feel free to reach out anytime 💬

Best wishes,
NirNova98 🌌

Hey celoewer 👋🏼

Haha, great eye — you totally caught me! 😄
I am keeping a close watch on the new spider design for Brand New Day. 🕷️

Just like with my other Spider logos, I’m waiting for a clearer and more symmetrical reference so I can make it as accurate (and awesome) as possible! 🔍🖤

No worries — the moment we get a better look at that spider, I’ll be on it and you can bet I’ll drop a 3D model faster than Spidey swings across NYC! 🕸️🚀

Best wishes,
NirNova98 🌌

Hey igor1111ry 👋🏼

I really appreciate the idea, but I’m currently working with tools that are more suited for geometric and mechanical shapes, so creating something that is organic like isn’t really possible with my setup. 🛠️🪚

Best wishes,
NirNova98 🌌

Hi mate 👋🏼

Please keep the conversation going by posting under your original post, thank you! 🙏
And the model turned out amazing! 🔥👏

Hi edv-qedq 👋🏼

If I understood you correctly — the print fails around 1.5 mm and starts printing mid-air, leaving a plastic mess 🧶😕

That usually points to a first layer height or Z-offset issue ⚠️🔧
I recommend checking your bed leveling and making sure the first layers are sticking well ✅

Let me know if that helps or if you need more guidance! 😊💬

Best wishes,
NirNova98 🌌

Thanks,I'll check the bed but everything else even your twist cube printed great!I tried the vortex body again this time with 30% infill and 40mm speed and i made it to 57% print but all of the twists started flexing then one broke off!layer height is set at .16 mid quality.I tried to use supports but cura only will put supports in at the bottom of the bigger diameter of the top part so i was wondering if i could get a STL file with supports on the middle (thin part) and the beginning of the top then i should hopefully be able to print it!im also using outside Brim and glue stick on the bed so the bottom doesnt move at all!my printer is an Ender 5 pro with sprite extruder and Bl touch!Thanks,Ed V.

Sounds like the twisty sections are flexing from lack of support. I'd suggest trying Tree Supports with custom support painting to target those thin areas better 🌳

Also, if you're using fewer than 3 wall lines, increasing to 3+ can really boost strength 🧱

Let me know how it goes — happy to help anytime!

Hi uhaase 👋🏼

Thank you for sharing what worked best for you — I’m really glad you enjoyed the design! 🙌
Would love to see you post a “Make” of your print 🖨️✨

Best wishes,
NirNova98 🌌

https://cults3d.com/en/3d-model/various/hidden-batmobile-bat-logo

Hi nicolarocca 👋🏼

Thanks for reaching out. I have to admit I’m a bit confused 🤔 by your request. From what I understand, you’re asking me to remove my own logo so that you can use it as your own 😅.

To clarify, I’m not interested 🚫 in giving up or transferring rights to my logo, and I won’t be removing it from the site. If you meant something else, feel free to explain 💬.

Best regards,
NirNova98 🌌

Hi,
being that I really like the design of the batlogo I wanted to know if it was possible to appropriate it without having any problems if I wanted to use it as my own logo, can I do that? or not? or do we have to have a negotiation?

Thanks again for your interest! I’m really glad you like the design 😊

That said, I’m not open to giving permission for others to use the logo as their own, and I’m also not offering custom designs at the moment 🚫✏️

Hope you understand — feel free to create something unique that represents your own style! 💡

ok, you don't give me permission but that doesn't mean I can't use it without any problems being that you made it available on the site, so I ask you can I use it on the armors I create but not as a personal logo ? in case if I modify it can I then use it like a logo in my social? let me know thanks

In that case — it’s totally possible! 😄👍
Just one thing: if you post it anywhere, mention my account here 🙏📸💬

Thanks! 😊

Hi ssDarkAngel 👋🏼

First of all, I’m really sorry I haven’t replied sooner — I completely missed your message 😔
I just randomly checked my comment section and saw it.

As for your question:
You should print two dice, and when you roll them, combine the numbers. So the possible results range from 2 to 12. Then, look for a building block that has the combined number and try to balance it on the base.

Regarding the pieces: you can print as many as you like, but I usually go with 1 of each to start. You can mix solid and hollow ones — it just adds variety to the challenge! 😄

Let me know if you have any more questions! 🎲🏗️

Best wishes,
NirNova98 🌌

Hi 3dnetic! 👋🏼

I understand your concern, but as I’ve mentioned before, I created this design from scratch without knowing about yours. 🛠️
You’re not the only one in the 3D community to come up with ideas for this type of design—similar concepts can exist independently. 🔄✨
My work is entirely my own and not based on yours.

Also, even if someone wants to create a similar design, it’s completely legal unless the original has a patent, which grants exclusive rights to the idea.

Best wishes,
NirNova98 🌌

Hey Physhyr 👋🏼

I haven’t tested it at a different size, so I can’t guarantee the results 🤷‍♂️
But you can give it a try with the test files I’ve included —if they work, the full print sho uld work too ✅

That said, personally, I don’t think it will work ❌ because the distances between the objects are precisely calculated 📏
Scaling it down would shrink those distances, which might cause issues ⚠️

If you do try it, I’d love to hear how it goes! 🤩🔍

Best wishes,
NirNova98 🌌

Hey erwilde 👋🏼

Sorry to hear your print fell apart! A couple of things to check:
- Some slicers have XY compensation settings that can affect wall dimensions.
- test files have been added, it is recommended to use them before using the bigger designs.

I’ve included details in the description—checking those should help prevent material waste. Let me know how it goes! 🙂🔧

Best wishes,
NirNova98 🌌

Thanks that worked. I saw in your video that you seemed to print it on base that you could just peel off. I had to individually separate the pieces. What kind of set up did you use to get that base that you could just peel off?

Technically, it’s not necessary 🤔, but I use it to stay relaxed and not worry about the print disconnecting from the plate 😅

It’s called 'raft' , and here are the settings I use in my slicer:
Link - 1
Link - 2

You’re probably using a different slicer, so the setting names or options might be slightly different ⚙️

Hi Angelo42 👋🏼

You should be able to re-download any design you’ve purchased anytime, as many times as you want. 🔄✨

It might just be a temporary overload on the platform’s servers. Try again later, and if the issue persists, reaching out to support would be the best option. 🛠️📩

Best wishes,
NirNova98 🌌

doesnt give me the option just says contact.... and here we are

“Contact” is for reaching out or leaving a message on the profile you’re viewing. I think you meant “Content” instead.

To download again, click on your profile picture on the top right of the page (next to a downward arrow), then select “Downloads”.

There, you’ll find all the designs you’ve purchased or downloaded. 😊🔽

Which one have you printed?
And please don’t open new comment section, stay under the previous comment section

250mm So ist richtig?

Tomorrow I might be able to check the file.
Because according to my last check, there was no issue with the file.
I will update you tomorrow :)

Danke. Bis Morgen

Guten Morgen Subarev! 👋🏼

Ich habe das Design überprüft, und es gibt keine Probleme damit. ✅
Link zum Bild

Ich denke, du hast den Slinky zugeschnitten, damit er auf dein Druckbett passt – das solltest du nicht tun. ❌
Du darfst weder die Größe noch die Form oder andere Eigenschaften des Modells verändern.

Stattdessen solltest du einfach die passende Größe aus den verfügbaren Modellen wählen und die drucken, die auf dein Druckbett passt. 😊

Guten Tag!
Frage? Ich habe gekauft diese Model warum ich kann nicht (das solltest du nicht tun. ❌) Ok verkaufen ich kann nicht.
Bitte nicht böse sein ich habe nur gefragt. Danke noch mal ich habe komplett zufrieden und Danke Ihre Hilfe.
Ok. Danke :) 😊

Guten Tag, Subarev! 👋🏼

Auf jeder Design-Seite gibt es eine Lizenz, die die Nutzung regelt. 📜
Alle meine Designs sind nicht für kommerzielle Nutzung freigegeben – sie dürfen nur für den privaten Gebrauch verwendet werden. 😊

Ich freue mich sehr, dass du zufrieden bist! 🎉 Und du bist jederzeit willkommen, mich zu fragen, wenn du etwas wissen möchtest. 😊

Sure M8 :D

Is your id

Notice that whatever youre saying is not a part of the post.
I received your message in instagram i just can not respond right now, give me a couple of min :)

Ok I am wait

Hi Giwuu 👋🏼

Great idea!
I’ll post it soon 👻

Best wishes,
NirNova98 🌌

Just saw it, thanks for adding it.

Of course, feel free to request for anything and if i could and it is fit my designs I’ll probably add it 🧸

Also, thank you for your donation, i really appreciate it! 🌹❤️