COMMERCIAL LICENSE
Sell my designs for $10/month!
https://patreon.com/meshminds
👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇩🇪 País del usuario: Alemania
🌐 Idioma preferido del miembro: Inglés. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.
I saw your weight plate magnets, I’m not savvy with making prints yet, but could you change the words on the plate? Was thinking of using these to mark my bench, squat, and press locations on my rack with it.
Hello! We are new at this so maybe it’s an obvious fix. We have success until it is about 80-85% done when the base “unsticks” to the plate and it starts moving around. Any tips on getting it to stick through the whole process? We have an ender 2 pro. Thanks! We love the design!
Hi! Thank you!
I know about that problem. We should be able to fix it. This is fairly common, because the surface area is quite small.
1. Wipe your print bed with isopropyl alcohol. This will make the print stick better to the print bed
2. Create a 3mm brim around the object. You should be able to add that in your slicer. Play around with those settings. Ask me if it doesn't work well for you.
(3. Optionally: decrease the printing speed. This should do the trick. I would only do it if the first two steps didn't help)
Hello _ I purchased this but the size on my Cults software is too big. I have to scale it down to 10%
Am I doing anything wrong, and if I scale it to 10% will the base pin fit in the hole? thanks
While at 10% the base prints but the front is all over the place. Needs a support in the front?
Hello,
I noticed afterwards that the metrics I used was wrong. Scaling it to 10% will be the right size. It needs supports on the bottom.
Then it should work just fine :)
I've printed this several times now in different sizes and every time the bottom of the Croc is messy and the heal has a hole. :(
Can I have permission to sell the prints in Australia?
Hi, send me a message here: daemien44@web.de
Thanks so much! Love these! Are they sell-able? Like through my Etsy store?
Hi, send me a message here: daemien44@web.de
Hey there! I downloaded the mini crocs and when I bring them into my software they are huge! I can scale them of course, but what size are they supposed to be? Making the charms as a gift, and I don't have my own crocs, so this is important.
THANKS!!!!
Hi,
oh sorry you're right. Scale them to 10%. That's the right scaling.
Hi! I am trying to print the mini crocs. I have an Ender 3 V3 K3 printer and am using Creality Print. I am using a 0.2 nozzle and set the print parameters as you suggested but the bottom inside is messy, and the top sides are flimsy and not smooth along the top edge. Any suggestions for print parameters? Thanks so much!