64 comentarios

Oh. That will take me some time because it was originally modeled with tolerances for assembling purposes, but it can be done.

I’ll look into this matter and will keep you updated! Thanks for letting me know.

Hey! Sorry for the late response. You’re the first to tell me that, what seems to be missing?

Hey. Uhm, something like a guide, not really. I can say that all the files that have a x# on their name mean you’ll need to print that same model x number of times. Printing orientation I leave it for everyone’s preferences, and let me check if I have an explosive view of the assembling, and if not I’ll make one asap.

the thing that is getting me is just the orientation for the prints. The bigger pieces are a little hard to orient on my printer

also, for the "small" folder, i think that the "body top" stl is misssing the dowel holes on the connection of the BBB and BBA

Oh. Let me check on that. I recently printed one and it was ok, but it could be that I uploaded the wrong files.

no problem! i'll be waiting

on other note, i can mix and match the files from the small folder with the regular ones, right? i can fit every piece in a orient that is nice except the body parts, so i was thinking about printing the small ones only for the body. (top and bottom only)

Yeah, you can mix. The ones on the small folder are basically the large parts split to fit into smaller printers.

Have you managed to check if you uploaded the right file with the dowel hole from the small folder? I'm planning to print it today~tomorrow

I've uploaded a couple of reviewed files and folders. Let me know if it appears correctly now.

seens its all fine now! Thank you very much, i'll post a pic once i finished printing it for my friend!

Hey! Sorry for the late reply, it's been a busy week. There's no difference between the files in the folder and those outside it. The ones that are different are in the full dowel folder. The small gap might be due to a length difference with the pins, you could try shortening them a little and see if that works.

And I usually leave the Spikey for the last, and glue everything else first.

Hey! Usually that’s how I design the models, but with this particular Keyblade I couldn’t find a more suitable way to design the Blade section with 3D printing in mind.

ok understood thank you very much

Hey! The pieces are to be put together by ducktail assemblies and pegs. I have printed a few and there hasn’t been any issues so far about frailty. Just print with 3-5 walls and 10-15% infill to make it sturdy and light. And it will be also important how well glued together are the pieces.

Is that the same with the way to the dawn and no name xehanort keyblades as well?

Yeah. There are a few models in which I’ve put space for a dowel, but not every Keyblade has the shape to house one. That’s why I moved to pegs instead in most models.

Hey! I have already made them, and I thought I had uploaded them… I will add them later today. 😬

Dude you are a life saver.

There. Model is up.

Cool That helps with my cosplay. Any chance of doing his nobody version?

I might do so. Don’t have much time to model these days, but I’ll see if I can work something out on my spare time.

Hey! I remember, but haven’t had the chance to do so. I’m sorry.

Fine ,is ok,thanks, greetings

Also I was curious - it states that you need 2 M4 screws to make the cylinder functional, but there are 3 openings in the Lever file? I assume one screw is to be inserted into the direction that has the larger opening to accommodate the head of the screw and "hide" it?

That's correct. One screw is to hold the lever in place, 2nd screw is to "guide" the movement, and a 3rd one, large, is to connect the lever with the cylinder.

Hey! Oh, that would be great. I’m interested.

Cool ! :) Do you have a discord or something we can chat ?

I do have Discord but haven't used it in a loooong time. Let me recover my log in info. And sorry for the late response, I've been super busy these days, but as soon as I finish up a project I'll be able to talk about this new project.

Okay :) Take your time and keep on doing the good work ! Also quite busy myself, harsh times nowadays..

Hey! Thanks so much for liking and buying my models. Sure, I can do that. Would you like it to be of the same diameter as the pins or have a specific dowel diameter in mind?

I've not yet checked the pin size but for another 3d print I bought the creator used 1/2" dowels for a rifle. That said if you use a standard size dowel I can find them pretty easily in stores. Thank you very much for answering so quickly 😁

Hey! Sorry I took so long, my life is going through many important changes... But I have already prepared the files for the Blade section of the Oathkeeper. I'll upload it right now and start working on the Oblivion. It will use a 1/4 in dowel because it is rather thin.

Uploaded the files for the Blade section of the Oblivion Keyblade too.

Great works and many thanks. No problem for the wait. In the meantime I was printing the other parts and it's wonderful. Once I finish printing the oathkeeper I will buy the oblivion right away 😁

Hey! Thanks for your kind words and for liking my work. Sure, go ahead, and I’d appreciate tons the crediting and the linking to cults ☺️

Awesome, thank you so much!

Hello! First, thanks for acquiring my Keyblades. I just checked them out and all the files you mention are uploaded, so I'm not sure why you couldn't download them.

Hey! Thanks for letting me know. I thought I had uploaded them. I’ll check it out tomorrow and upload them.

Sorry I took long, but the crosses for the chain have been uploaded.

other than that, its an amazing model, but this flaw makes the pieces incompatible to put together without user correction

Thanks for letting me know! I’ll get it fixed.

thank you! Could you let me know when you've adjusted it?

Sure thing! It's been uploaded.

Thanks for the kind words. Let me take a look into it, see if I can model it.

Sorry! Completely forgot to reply… No, the model comes already prepared and split into several parts for ease on 3D printing.

If I got this model, could I get a full unbroken model file as well? Magic the gathering has a collaboration with final fantasy and I was wanting to make a deck box that look like his gun but I'm not a modeler and don't know how I would even start to making one myself so I was hoping to just get a file that I could work with

I’ll need to “merge” everything into a single body, but I think it can be done.

Amazing

Added it :)

Hey so I finally got to look into this a little more and was wondering if you could make it so the barrels could still pivot, I know I'm a pain, but it would mean a lot to me if this where possible

Hey!!Yes, it comes as a kit, so you’ll have to print several pieces and then assemble them.

As for the material, that’s up to you actually. The most commonly used is PLA, I have printed it with that before. But it could be made of other materials, like ABS, PETG, or resin. What you should be looking for with the service you’ll be using is what printing volume capacity they have, just to check if al the pieces would fit on their printer. Some pieces are large, I designed it to fit on a 30 x 30 x 40cm printer. But it could be adapted to other volume sizes if you’d need to, just that I’d need to know to which size adapt it.

Hey!

What I did when designing it is that I left some space where pieces join to place a spring. When I last printed it I used ball pen springs, so the pieces return to their place when not stretched. Of course, it is more decorative than functional, so no high tension on whichever material you decide to use for the string of the bow, but it does simulate the stretching with the springs.

Hey! Alright. Saw your offer earlier, but I think I might be up for a bulk discount. I’ll enable the option again so you can make a new offer. We can discuss it then.

Hi, that would be awesome! however I do not know where the buy bulk discount option is or do I just redo the offers for the 3 files I want?

Yeah, that is correct!

I sent the offers

I already accepted them. 🤔