26 comentarios

Let me see what I can do.

I looked at this project file and because of the structure of these rings and the way the project is designed, I unfortunately cannot make a 65mm version. However, I can make a Single and Double version of the Deluxe Estim Loop Guides in larger sizes. Did you purchase the ESTIM Insulation Guide Rings or are you looking to purchase something?

Thanks for the message. I considered selling the molds and even the silicone products, but unfortunately I’m not able to do that at this time. There are some online services that you can upload your model files and have them printed and shipped. Depending on your location, there could be something local to you. Do a google search… PCBway prints as well.

Hello,

I’m sorry to hear that the mold isn’t working out for you.

Yes, the 15A silicone is likely too rigid for this design. Could you please specify which mold style you’re referring to—Original, Deluxe, or Elite? Depending on the amount of space you need inside, you could try resizing the entire mold by a small percentage. However, ensure that you resize all parts simultaneously. This adjustment would reduce the internal space but also make the walls thinner. Due to the design of this mold, it’s challenging to make the walls any thinner while maintaining proper functionality. Since the mold isn’t working for you, I’ll refund you for the model.

Hey, its not neccessary to refund. I will try to resize up and take 10A Silicone. I didnt fin 0A in Germany. I thought probably you have a one with thinner walls. I use the original one. I will let you know..! Thanks

Short update, i took Vaseline and some time and it fits. :-)

That's great news! I did issue a refund for you;) Note that you might want to use a water based lubricant instead of vaseline as petroleum jelly could affect the silicone over time. Have a great weekend.

Trollfactory hat 00 (TFC Typ 13)

That’s awesome. Yes sometimes you have to resize a little. I use the Smooth on 00-20 or 00-30 and they are quite stretchable. If you like the suction feel, try the Jack Junior. It’s one of my favorites. Thank you for the feedback, I love to hear it.

This smaller, rigid prostate stimulator primarily uses an Estim electrode design. The small, non-Estim probe also works well, and I didn’t see a need to include it as a solid silicone mold. However, if you’re genuinely interested in having the non-Estim version as a casting mold, I’ll consider adding that to this project. Let me know. Thanks

Can I get a refund?

I will purchase another product from you.

Yes, I’ll refund you. I am working on the silicone mold now. You can keep the model and download the molds when I upload them. Sorry for the inconvenience.

I would say The Jack Junior is my favorite with the Deluxe Hand Job running a close second. When I travel I’ll usually bring a Jack Junior along.

Probably not. The tube could be inserted through, but I would suspect the PA would need a side to side loop, not up and down. Maybe if you had another small ring between but it would be a tight fit as the loop is meant to press in the opening of the urethra.

I understand... My suggestion is that it's best to take measurements with a string to figure out what is the best size to print. The diameter will be the circumference divided by Pi (3.14). Example, if the string circumference measures 6 inches (152.4mm) then 152.4mm divided by 3.14 =48.5 mm = 48.5mm, so I would go with either 45mm. And when you're choosing silicone, going with something softer like 00-30 ECOFLEX Super Soft Translucent Silicone gives you plenty of stretch to get the ring around everything and wont be overly restrictive. Measure and let me know what sizes were talking about and I can help you decide what might work best. I hope this helps.

so what would it be if it were 11 in around?

Wow! Lucky you! I am assuming you are measuring around at the base of your cock and underneath your balls and pulling the string slightly tight? If so, 11 inches is ~279mm. 279mm divided by 3.14 = 88 to 89mm diameter. You'll want your cock ring to be a bit smaller, but not too small that it's too hard to put on. I would suggest using a soft silicone like 0A LET'S RESIN or even 00-30 ECOFLEX. With a soft, stretchable silicone, you should be able to get into a 65mm or 70mm diameter ring. It might even be possible to get into something smaller too depending on how tight you want it to fit.

If you're interested, I added 60mm - 75mm diameter molds to the Perfect Fit Cock Ring. I would suggest trying the 65mm or 70mm with soft silicone.

yes i neeed hands on help HA

Hello. I’m not sure what you’re using for silicone or if you are referring to store bought rings… I would suggest using a softer silicone so it would be more flexible to stretch around everything. 00-30 would give you a ring that would stretch a lot so you could use a smaller size so it’s tight enough to keep you stiff. For even more stretch, try 00-20, if you want a bit stiffer ring and less stretch, use 0A. Most store bought rings are 10A or 20A and don’t stretch much. Keep in mind though, softer silicone tends to roll up on flatter style rings so make something that’s a bit more rounded in design like my perfect fit cock ring and use soft 00-30 silicone.

Hope this helps. Let me know what silicone you tried and which style rings.

ok, i will. Is there somewhere you want photos to be sent?

Unfortunately, that is not a service I provide at this time, but thank you for asking.

Hello. I don’t have one that curves up, only straight and curve down. I would say the Big Head 2 is your best option. I use a P1S for my prints.

I’m very sorry, I currently don’t sell molds or finished products.

I’m sorry, I currently don’t sell molds or finished products.

Darn, that’s too bad.

The metal plating

I don’t think that’s one of mine molds. Unfortunately, I don’t provide that service. Sorry.

Alright thank you

Platinum-cure silicones are generally safe for body use when they’re formulated as medical-grade or FDA-compliant and are properly cured to remove any harmful residues. I use mine without a condom and am just sure to wash and dry them. I have not had any issues. This one you sent is listed as non-toxic and platinum cure, but if you want to be 100% sure something is body safe, you would want to contact the manufacturer. Of course everything is “use at your own risk”.

Thanks for the message. I considered selling the molds and even the silicone products, but unfortunately I’m not able to do that at this time. There are some online services that you can upload your model files and have them printed and shipped. Depending on your location, there could be something local to you. Do a google search… PCBway prints as well.

Hello. Look at the BambuLab line of printers. The A1 mini is in that price range. My first and only printer is the P1S and recently got the AMS for multi-color printing. They are very easy to work with and Bambu Studio software works well. I’m sure there are other comparable printers, but I’m biased towards these. Do your research, check the reviews, and watch some videos on YouTube to see if you’re interested.

Do you have social networks?

Thank you for the message. I did have instagram and twitter a couple years ago, but thinking about restarting something on BlueSky... Hopefully in January or February. If I do, I will link from my profile here. Hope you have a great new year!

Hello my friend. They are all good for mold and toy making. As to which is best, it really depends on the mold. For a standard cock style dildo you’ll probably want something soft, like Ecoflex 00-30. The thickness of the toy works well with the softer silicone and is still rigid and flexible too. If the mold is for a insertable toy that is narrow or needs to be rigid, you’ll want a stiffer silicone… The Let’s Resin is a great product, you might want to use the 0A. Anything stiffer than 0A would be too stiff for a dildo in my opinion. My go to silicones are the Ecoflex 00-30 and LR 0A. It’s really personal preference, so try it see what you like. Hope this helps!!!

I have a few projects to complete before the holidays, but then might have some time to look into this. The Handy definitely looks fun and I’m already invested in the VR part. I wouldn’t want to put a lot of effort into something I couldn’t test and use, so I’ll let you know if I get one.

Yeah totally hear you on that. It truly is next level. Let me know. ✌️

That's a good idea, but I don't personally own a Handy device so it would be hard to create a compatible sleeve for it unless I had specific measurements and dimensions of what you're trying to create. Do you currently own The Handy? Have you done any mold printing and/or silicone work yet? The Handy does look interesting, I might need to invest in one down the road.

Thank you! Yours too!

Hi there. I answered your message, but somehow it disappeared. Anyway, when I make this mold, I hold the two parts together and wrap the center with a strip of masking tape. Then go around the seam with another strip of masking tape. You can then apply your clamps if you want. For added security, you can apply a thin layer of petroleum jelly or Vaseline to the edges of the mold before closing it to seal the seam like a gasket, but be careful not to get too much inside the mold. Please let me know if this works for you.