/https://fbi.cults3d.com/uploads/user/avatar/34765141/EKDStudio_siyah.png "EKDStudio")
To bring your imagination into the physical world, we unite unique 3D designs in a single vision—ranging from gaming universes and the world of cosplay to modern decor and custom collectibles.
To review all of our work and access the platforms where we are featured, you can visit our website.
https://linktr.ee/EKDStudio
👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇹🇷 País del usuario: Turquía
🌐 Idioma preferido del miembro: Inglés. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.
Is there a mechanical movement for the jaw?
Hi, thanks for your question
The jaw is attached to the body with cylindrical pins, which allows it to move up and down as desired. However, there's no gear or motor mechanism — it's not motorized, so the movement is manual.
Hi , I recently purchased the sword of the ruined king from your profile , and the whole version of the sword still has the separation lines and I cant work with that , can I request or ask you to send me the whole version but without the lines?
Hello, thank you for your message. I will check my files as soon as I am available. If a version without the separation lines is available, I will update the files and let you know. Thank you for your patience.
Hi, I have updated the files. You can check the new files
i recently bought the 3d file for viego's sword and I was wondering if there is a suggested printing position for the part that reduces the supports without sacrificing the quality of the print?
Hello Since the parts are long and thin, I recommend printing them vertically. Place the flattest end of each part directly on the print bed to minimize supports and maintain quality. Just make sure you have good bed adhesion.
I found another issue with the model, at part 7 when printing there isnt anything holding up the connecting part for part 10 (the first handle of the sword) and its also hollow in the middle giving it little to no resistance. I have a screenshot but sadly i cant post it here
Thanks for letting me know. I'm looking into the issues with the model now and will get back to you as soon as it's ready.
I've fixed the issues with part 7 that you mentioned. You can check the new files now.
if I buy the blade of the ruined king , does it also include the not-cut sword version ?
Yes, the download includes both versions: the fragmented (cut) version for easier printing and the complete, uncut sword file.
this massage is turhish: knk selam ben de türküm ve şunu söylemek istiyorum briar patentini satın aldım ellerine sağlık ama şöyle bir sorun var dosyaların hepsi sol taraf için mi tasarlandı yoksa sağ sol karışık mı çünkü 4. dosyadaki parça ile 1. dosyadaki parça birbirlerine uymuyor sokum tarafı yanlış.
yoksa benim yazıcı mı şekilleri yamuk basmış olabilir?
kanka normalde düzgün olması lazım cünkü sol taraf ile sag taraf tamamiyle aynı test ettigimde uyumsuzluk cıkmaması lazım belki gozumden kacırdıgım biryer vardır fotograf atabilirmisin
Bana sosyal medyanı verir misin benim instam : pesimistefe
bioda youtube linki olan senmisin ona gore atayım istek
1 tane pesimistefe var zaten palyoço makyajı var 19 gönderi var :)
insta yok normaldede 2 3 takipcili bi hesaptan atiom istek ordan geri yazarsın
Hey, i have a question i buy the briar pillory file they werent the file with the color on, is this possible to have it this will help me for painting it after printing and do the 100% scale is enhough to put our hand in ?
Hello,
When the model is printed at 100% scale, it might be a bit small for cosplay. The total length of the model is 80 cm. The part where the hand and wrist go through is 4 cm wide and 6 cm long, so it may be too tight for an adult hand.
STL files do not contain color, but if you like, I can provide the model in GLB format with colors. You can use it as a reference for painting after printing.
However, some areas, like the parts that are assembled or removable, may not have accurate colors, and some parts in the UV map may be misaligned. So it’s better to use your own judgment when painting those areas.
the raiden shogun sword is very low poly and doesnt work btw :') 5 failed prints
This model was one of my early works. I’m sorry for the issues you experienced.
I have completely redesigned the model for you, fixed the errors, and made it fully compatible for printing.
Thank you! 💜
Hello, the model is not in proportion. the individual pieces are waay diferent sizes and i cant guess wich is the correct size. the ones that are together dont match. mjolnir is smaller than the base
Hello, sorry for the inconvenience. I have resized all three models again. If you’d like, you can also check them in your slicer program
Hello, do the arms and head move?
No, the arms and head are not moving.
Hello,
I have a problem with the arm of 2122993.
There seems to be a problem with the opening for the hand. My slicer does not recognize it correctly. Even with Tinker CAD it is not displayed correctly, so I can't change it. Do you have a solution?
It looks fine in the Windows 3D viewer....
https://ibb.co/FHY536n
https://ibb.co/9G0fppc
i fixed the errors in the model and checked it in chutibox, there is no problem, can you download the new files and try again if the problem occurs again, I will model it again for you
Now it works. Thanks a lot!
I'm sorry to bug you again. I have the same problem with the hand...
https://ibb.co/m5vKTfr
sorry for the error, can you download the new files again and try, there shouldn't be any problems at the moment
Looks good! Thank you.
/https://fbi.cults3d.com/uploads/user/avatar/18823316/272_sin_t%C3%ADtulo_20240608203903.jpeg "victorart")
/https://fbi.cults3d.com/uploads/user/avatar/24007183/Screenshot_2026-04-29_203736.png "Polyfairy")
/https://fbi.cults3d.com/uploads/user/avatar/23576610/image-removebg-preview.png "Brucebane")
whats the filament usage of Viego sword, would like to know how much filament will be used before buying
Hello,
First of all, sorry for the delayed reply — your notification reached me late.
Since wall thickness and infill density can vary based on personal preference, these settings are not fixed/included in the model files you receive after purchase; you're free to configure them as you like.
When printed at the model's original size (without any scaling), using the standard print profile (4 walls, 10% infill), and excluding support structures, the pure model weight comes out to approximately 753 grams.
Accordingly, a 1 kg spool of filament will be sufficient for this print.
Best regards.