3D modeller obsessed with tanks; 3D printing and warhammer 40k.
Working on Max 2021.
👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇪🇸 País del usuario: España
🌐 Idioma preferido del miembro: Español. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.
Hi - Land Rover 101 truck
Just wondering what scale this is at? My Dad is ex RA and used to drive one of these along with a Rapier. I'm looking at getting the Rapier SAM set from Flank March Store which can be printed in 15mm, 20mm and 28mm scale. So I'm trying to see what scale this is so I can look at getting both done for him as a surprise gift. Thanks :)
Hi Kosh! I usually scale the models to 1/57, wich in miniature terms is the equivalent to 28mm :)
Hi, I have just bought your Ajax tank model and I am having a lot of problems with it, the parts are showing as having many "holes" but cannot be fixed without completely ruining the model. I have been doing this for over 4 years and not had this experience of a model before. I have run it through 4 different programs and all showing the same problem, like walls appear there but don't actually exist. I have tried slicing in various programs and printing it out but it just messes up the model. Is this something you can fix?
Hello Rupidia! I´m gonna revise the model, give me a couple of days :)
Hi, thanks for looking into this. Do you have any updates? Was hoping to get it printed and painted for my game this weekend.
Sorry Rupidia, I was Afk due to work. This week will have the model ready :)
the file is modified but the front doors are still missing, this is what I see in the download
CAGE.stl 456 KB
driver_seat.stl 868 KB
hull.stl 10.8 MB
roof.stl 356 KB
seat (x2).stl 1.14 MB
seats.stl 1.73 MB
wheel (x5).stl 1.1
I reuploaded at night with the door fixed, try to download it again ;)
buongiorno sono Leonardo Ghisu ,ho comprato la settimana scorsa il file vm 9o t ma era corrotto ,mancavano gli sportelli,puoi gentilmente rimandarmelo corretto? la mia mail e' :leonardo.ghisu@libero.it
Dear Apheiron, many thanks for your appreciate gift. I think to buy other your 3d models asap. Best regards . Roberto Serra
Thank you Roberto! :D
As soon as it is uploaded, let me know because I have a tight deadline for the delivery of the diorama
Files uploaded.
ithe correct vm90 file was reloaded because I redownloaded it and still get the same error
Hello. The file will be uploaded this night or tomorrow. As you can understand I was at weekend break.
Thanks, I'll update you as soon as I print it
I have a problem with the Iveco VM 90 file. It doesn't print the cabin doors. I've already failed 4 prints.
Hi, I have a problem with the Iveco VM 90 file, it doesn't print the side doors.
Hello! Just with one message is ok. I'm gonna revise it, some older models are having problems with new slicer versions.
hello, just bough the puma and the model is outright broken. broken layers, broken parts and with how the interior is modelled has a lot of resin traps, in addition to parts too thin to even print. this model seems impossible to print in this state
Hello Kret, is the first time I have a problem with this model. Let me a couple of days so I can solidify the model so its easier to print. Please let me a mail direction to send it.
hello, any update regarding the files?
Hello Kret, I'm still working on it, by ends of this week ir should be fixed.
selam senden bir şey isteyebilir miyim
Sorry, Just english or spanish.
hola Apheiron, estoy interesado en el iveco VM 90. quisiera que las puertas sean por serado, para que sean funcionales, será posible ?
Hola! claro, mándame tu correo y te envío el modelo con las puertas separadas.
Claro
richardyerik@gmail.com
Hola Richard! disculpa el retraso, en unos días actualizaré el modelo con las piezas arregladas.
Gracias, estaré en espera...
acabo de descarga la nueva actualización esta genial, pero le falto adjuntar la puerta. porfavor
Hi, I love your models, they are so detailed and always print nice.
I have been looking around for a model of the Mowag piranha II from the Swiss army ( https://ibb.co/cX3jhvNR ) but couldn't find one. Could I commission you for one?
Would mean a lot to me if you agreed, either way, keep up the good work and I will keep looking at your models!
Hello CaisV! I can work on it, let me a couple of days if I can arrange something.
Hello Caivs! after a bit of time...I´m working on it! in a couple of days I´ll have uploaded
Hello, thank you so very much for doing this for me!
I cannot wait to see it
Once again thank you, I will support you for many a year to come.
Has been a bit difficult, I worked on the basis of the BISON and COYOTE vehicles, wich are based on the piranha II. It would be still useful for you?
I just acquired the Freccia model, but when I went to check it with Meshmixer to create the corresponding exploded view for printing, I saw that the complete suspension, the barge (with details inside that cannot be seen since the rear ramp cannot be separated), and the barge would need to be divided into two parts (separate upper and lower parts), as well as the hatches cannot be separated.
Would it be possible to make the main assembly, along with everything I've explained, not a single unit?
Thaks so much best regards.
Hello Sniper! yes, I´m gonna revise it and separate all the parte so you can print it separately, and another "solid" model so you can have the two options :)
the stls are insanely huge and they're crashing both my slicers
Wich one is causing trouble to you? I can re-scale and send it to you.
ciao, ho acquistato i file stl, quando carico il file su CURA della versione completa del vm90 la parte del cofano anteriore e dei sportelli è come se non esistesse e non li stampa
Sono in attesa di una risposta grazie. Ho effettuato l'acquisto e non riesco a stampare il file perché mancano dei pezzi!!
Hello Zeffix. I opened the filex on chitubox and they appear correctly, maybe is a problem with the slicer?
in the entire vm 90 file, the front doors and the engine hood are missing.
I´m gonna revise it, give me a bit of time to find the error :)
I'm still waiting....
I'm still waiting...........
Moin,
ich habe mir das Model des Boxers gekauft. Leider habe ich festgestellt das es keine Verbindungsmöglichkeit zwischen Turm und Fahrzeug gibt. Daher wollte ich nachfragen ob sie mir vielleicht die STEP Datei zur Verfügung stellen könnten, so das ich mir diese Verbindung nachkonstruieren kann.
Ansonsten sehr schönes Modell, danke für die Arbeit und die Hilfe im Voraus.
Mit freundlichen Grüßen
Fritz
yeah sure! Please let me an email direction so I can send it to you :)
Sent!
Requesting a refund of the Kraz 214, this model is useless for printing as its full of impossible to support voids, and atom thick walls.
Hello Ramble, many people has been downloaded and player the model, maybe it´s your setup? I could work on improving the model, but it would have additional costs
https://ibb.co/0VYH0ZQL
It clearly says 1 download and that's me, so why are you claiming others have had no problems when no one has tried it before? I'm just requesting the refund.
Still waiting on this refund. I have also discovered the model is an asset flip.
The original file is freely circulated online as a fully textured game asset
https://ibb.co/qLtxxxV0
Which explains why it's uprintable. I have checked and the models are pixel perfect matches
I´m sad to read to bad thing blaming my work from a person who is stealing intellectual property from Games Workshop. You are free to ask for the refund and Cults will proceed with it. I see no problems with the truck as I revised the model, is the vehicle that is posted on the page.
You have to issue the refund, From your sales page. If cults gets involved it will be because you are violating their rules.
Do you have a version of the AMX rc15 that isnt hollow? I'm trying to print but not getting good results.
Hi Robothouse! I could fill the hollow parts, but it would have a little extra cost. Anyway, you can try to solidify the model on blender, making it more thic.
I bought the leopard and centaur designs, but they are impossible to print in resin. They are poorly designed and always fail on the side panels corresponding to the armor.
Hi! its strange, it worked good on mine. I could try to modify the parts that are failing you, but it would have an additional cost.
Hello sir, last week i saw a ambulance version of the vm90 on cults. But i cannot find it back. Did i see it with your account?
Thanks
Good morning sir! Unfortunately, I have no ambulances on my list (yet) :C
Hi, I just bought the LCV Simba. It is 1/12 scale, you might want to put that on your page for it.
There are two triangular holes on the side of the hull that go right through the model from side to side. One is just below the hull roof in front of the rear lifting hook (the big hook in the middle of the side of the model) and one is just below the roof at the rear upper corner.
Also there are several voids inside the model. This means that it can't be hollowed for printing and the only way to fix the voids is to bore holes when setting up the print. As the voids are in places like the wheel hubs or deep inside the hulls this is not possible.
As it is now the .stl file is not able to be printed, please repair or refund.
Hi! sorry to hear that. As I said to other buyers, my models are the conversion of original high poly 3d models, so they are, in origin, not intended to be printed (That´s becaus the price is so cheap compraed to other models) If you want to, I could work in the model to make it more printable, but It would have an additional cost.
Hi again.
Your page for the file says the following:
""Modeled in Max 2021 and Printed in Anycubic Photon mono X. Resin is from SUNLU.
The model is solid, I advise you to empty the body and make a couple of holes in the slicer program.
Layer high: 0.05mm""
Now, if you don't intend for it to be printed why do you list print details on it?
Please fix the file. No, I'm not paying for it.
merhabalar ejder yalçın çiziminizi satın alıp baskı aldım. bir kaç hata var çizimde onları belirtmek istedim düzeltme imkanı olursa güzel olur. Mesela alt aynanın biri var biri yok üstteki aynada aynı şekilde biri var biri yok. ayrıca tek parça baskı biraz uzun sürüyor. parçalı şekilde varmı acaba. alt mekanizma ayrı üst ayrı şekilde.
Sorry, I just answer in english or spanish.