/https://fbi.cults3d.com/uploads/user/avatar/14619068/270624962_10158893543869983_292426089327674150_n.jpg "Adel85")
I'm a 2D/3D Character animator and a 3D modeler who love to make a 3D printed toys and action figures.I started my journey as a 3d printing designer in 2019.
What inspires my creations is animation and movies and video games.
👋 ¡Hola a todos! Este hilo es público, así que mantengámoslo bonito y respetuoso. ¡Nada de anuncios, spam o cosas desagradables!
🇪🇬 País del usuario: Egipto
🌐 Idioma preferido del miembro: Inglés. Puedes traducir en línea a través de DeepL.
💡 ¿Te refieres a un modelo en concreto? Añade el enlace, el título o el número de modelo.
🖼️ ¿Quieres publicar fotos? Utiliza un host gratuito como ImgBB y pega los enlaces en el mensaje.
✍️ Consejos de escritura: Usa el formato Markdown para estructurar tus textos y hacerlos más legibles.
Any chance you coud make a "Scrat" version? He's the squirrel from Ice Age.
I don't think the neck part came in the file.
when you unzipping the 2 zip files you will find it its name is Hulk_neck
não estou encontrando a parte do pescoço da figura
The duck leg can also be fixed, as it is not completely flat to the bottom
I'm sorry but It was supposed to be like this it's made to be Slightly curved
The opening for the right wing on the duck coaster is too large for the prong. The left one is fine but it looks like perhaps an inserted part is missing on the right side. Can you please send me the corrected file?
i'm so sorry for this problem
i fixed it and uploaded the files so you can redownload it now
Hi, thank you so much for getting back to me. Finally one of the downloads worked! Not sure what the issue was but looking forward to seeing the end result!
You are welcome
And good luck 👍
Hi, tried to download the amazing frog cup holder but the download seems to be empty! Any ideas?
I'm sorry you have this problem
When you download the file you get compressed file and you need to un compressed it
Do you get this file or the download link itself isn't working?
Hi Adel85,
Your articulated figures and cup holders are brilliantly simple I love when someone takes an everyday problem or pop culture character and just solves it elegantly. The way you design these moving parts to print in place is really clever.
Have you seen what people are actually using your cup holders for beyond drinks? I always wonder if designers picture one specific use case and then makers surprise them by hacking it for something completely different. Any weird or funny makes show up in your feed where someone turned your Deadpool into something unexpected or used the turtle cup holder in a way you never anticipated?
Thank you
Once there was someone who printed my Deadpool design in a life size scale 😅
Hello. Your products are very nice, and I've purchased a few. I need a license to make small online sales. I'm using a translation app, and I apologize if that caused any issues. Greetings from Türkiye. Have a good day.
Thank you
To sell prints commercially this is the Patreon page to get commercial Licenses:
https://www.patreon.com/EliteGeek
I am printing your cup holder. The tail section came off the plate, so I need to redo it. When I try to separate it from the legs, it comes apart. I can skip printing parts on my machine, but if I try to skip the legs it skips the whole group. Do you have just the tail section?
you can separate the parts in the
Slicer software
Hola buenas . Ayer compré el archivo y no encuentro la parte de abajo de la boca con los dientes . No está o no la estoy encontrando . Te agradecería revisar por favor 🙏🏻
The bottom part of the mouth with the teeth is part of the head itself It's inside the head
You can find a link in the description to a YouTube video that shows you the assembling
Just purchased the turtle cup holder file. What are the updates? Which ones should i use for printing? original or updates? tia
The update parts was made to be easier to print so it's better to use them
thanks. so i printed the parts and i cant make the eyes look forward - they look backwards. I did watch the assembly video but its just not working out. I sent you an email with the video of the issue. Could you please take a look and make suggestions of what i can do to make it work? Thank you.
You just printed the eyes mechanism there is a file of the eyes update you will need to print that also
im dumb. so sorry. Thanks for your prompt response!
ok another question. Does the top stay lose? or is it supposed to sit pretty tight on the bottom circle?
Yes it should stay lose so it can move up and down freely
Im thinking of starting my own line of figures.. just a simple man's body but articulated like this Deadpool one you made... Is there something you've created that's plain for me to work with . I bought a snapmaker U1 3d printer this month.... Help
The most important question is: What about a unicorn coaster? :-P
I'm planning to make it someday
I got the waist and chest printed but None of the pegs are fitting properly, do I need to adjust scale? I haven’t changed anything
Because of the difference in accuracy between 3d printers if the parts don't fit you can drill it or sand it or you can cut small parts of the plastic until it fit.
The parts are printing too small, I’m using a Bambu Labs X1 Carbon
Unfortunately I never used a Bambu labs before so can't help you with the sittings
You can use small Cutter to cut small parts from the plastic until it fit
Hello, I haven't experienced any problems printing the parts other than the print head.The print head section of the device is not starting to print.I tried loading it onto a memory card and testing it through the device's internal memory, but it gives the same error there as well.What could be the reason? Can you help me?
Hi, I just recently purchased the super figure and im trying to print it with PETG and it keeps failing, is there anything I can do to get it to print with PETG?
Hi
I'm so sorry but I never used PETG before so I don't know if it can work with my designs or not
I only use PLA+
hey, how do you attach the top shell? im having trouble
Hi
You don't attach it you just puts it on top so it can be free to move up and down freely
i purchased the turtle cup holder one. what does the top shell attach to?
As I told you
You don't attach it you just puts it on top so it can be free to move up and down freely
There is a link to YouTube video in the description that shows you how to assemble it
must have missed the link. will look for it.
Hola, buen día, el archivo del portavasos de Jack necesita algún resorte?, lo que pasa es que al momento de quitar el peso del portavasos no se levanta, se queda como si tuviera el peso todavía
No it doesn't need a spring
Mybe try print the fingers part with more than 40% infill to make it heavier so it can push the top up
Hello, Could you tell me, how can I obtain exactly the same result as shown in your catalog photo? Thank you.
there is a multicolor 3mf files for multicolor printers made using Creality Print I print it using the K2 plus printer you can adjust the settings to match your printer
Hi.
Thank you for the quick response.
I would like to get the result as shown in the corresponding picture, that is, a colored image of the cow.
Michail
there is a multicolor 3mf files for multicolor printers made using Creality Print
Hi.
The file I bought and uploaded is designed so that each part can be changed in color, but only as a whole piece.
In your example, the cow has multiple color details within the same part.
How can I get a file like that, or what do I need to do to create one?
Michael
Hi
Are You asking how to make a multicolor file to print in a multicolor printer?
Im using the cow cup holder files and the 3MF of the limbs seems to possibly have an error in it. The other 3mf files work fine, that one gives me an error
Hi
I'm so sorry you have this problem
What kind of error?
Says nothing on the print table or error in the file, and like ends with a -1, not sure what the -1 is
Mybe the file was corrupt while downloading
Wich slicer do you use?
Ok, so I switched slicers and it worked. I’ve been using anycubic cloud slicer, but the one file wasn’t working, I got it to work in anycubic next.
I am having trouble getting the eye mechanism to still to the bed and if I use brim it breaks taking off the brim.
I'm so sorry you have this problem
You can add some glue to the bed it can help make it still to it also you can print it with tree support it also can help
/https://fbi.cults3d.com/uploads/user/avatar/13573075/Intro-ezgif.com-crop.gif "master__printer")
/https://fbi.cults3d.com/uploads/user/avatar/49455012/image_1774586418104.png "Micheal_")
/https://fbi.cults3d.com/uploads/user/avatar/43066903/custom_logo.png "DigitalSolutionsNF"){kind=logo}
/https://fbi.cults3d.com/uploads/user/avatar/47485066/meeee__1_.png "VeraMarie")
/https://fbi.cults3d.com/uploads/user/avatar/38910350/channels4_profile__1_.jpg "3DJustin")
This is by far my worst expierence printing something. Not only does it purge/waste 210g+ but it has failed on the dogs left ear twice (right as we look at it.) Nearly 400g of waste and still havent had a successfull print. I am now printing the dog ears section lying flat with the ears on the bed and using tree sopport with a top z of 0.275 in hopes that i can actually finish this as i am to invested now