Skip to content
Free Calvin and Hobbes STL file, reddadsteve
1c779c1b 0c5b 426c 9400 6786340bcbe3

Makes created by the community

Did you 3D print this model?

Calvin and Hobbes

3D model description

Calvin and Hobbes, from the comic strip by Bill Watterson.

The comic strip Calvin and Hobbes follows the humorous antics of Calvin, a precocious, mischievous and adventurous six-year-old boy, and Hobbes, his sardonic stuffed tiger.

The full model is built using individual models of Calvin and Hobbes, therefore I created three separate Cults3D uploads:

For the final build using the individual Calvin and Hobbes models see:
https://cults3d.com/en/various/calvin-and-hobbes (this upload)

For the Calvin model see:
https://cults3d.com/en/various/calvin

For the Hobbes model see:
https://cults3d.com/en/various/hobbes

No supports are required. If you have the right filament colors, no painting is needed.

The fully completed model is 250mm tall after assembly.

Enjoy!


Print Settings

Printer:
FlashForge Creator X

Rafts:
No

Supports:
No

Resolution:
.2mm

Infill:
10%

Notes:
I used 3 bottom layers and 5 top layers


Building the model

Colors (there are no multiple printed pieces)
Brown:
log

Printing and assembly tips
1-No supports are required.
..
2-Be sure to use at least five top layers for the log for a clean finish.

Assembly tips:
-Build the Calvin model and Hobbes model using the Cults3D links provided in the introduction.
-The diagram in the pictures section will help in assembling the model and is quite straightforward.
-The model is meant to be glued together.

  • 3D model format: STL

Tags

Creator

Retired software engineer, learning CAD design and 3D printing. When creating models, I strive for support free designs and fun creations.

Share

License

CC BY

Similar creations


Add a comment

2 comments