Skip to content

StarWars TieFighter Gen2

3D model description

After my TieFighter Gen1 I wanted to do a new and simplified version. In addition, there also shouldn’t be any visible cables anymore. After a few weeks Gen2 was done. But as it is, real life goes on and I haven’t get any time to put it online. Until now….

I use quite normal materials and components as every model builder should have at home. Actually the whole building should be self-explanatory, but I made a short assembling video here: https://www.youtube.com/watch?v=Rvou3XwCeqw&t=180s

Depending on the controller, the longitudinal stability (sensitivity) could cost some troubles. Therefor I’ve printed the Winglets without cover layers and with an infill of something around 45%.

Have fun! I hope it fits all for your satisfaction…

Some Flightfootage you’ll find here : https://youtu.be/2D95EzOs3RY

3D printing settings

Printer:
ZYYX 3D Printer

Rafts:
No

Supports:
Yes

Resolution:
0.2

Infill:
10% - 45%

Notes:
Print the winglets without top/bottom layer and with something about 45% infill.

  • 3D model format: STL

Tags

Creator

3D-Printing since 2015, therefor I use ZYYX 3D Printers. My designs are made with SOLIDWORKS.

Share

License

CC BY NC SA

Similar creations


Add a comment