BETAFPV PAVO35 2 IN 1 - 光学流量和激光雷达传感器 MTF-01 或 MTF-01P 固定支架和大疆 O4 PRO 相机传输模块安装 TPU 插件

This design makes your Quad Fly Easier in tight and indoor spaces with LIDAR and comfort use of O4 PRO memory card and TYPE C access.

This is a - 2 IN 1 - BETAFPV PAVO35 OPTICAL FLOW & LIDAR SENSOR MTF-01 or MTF-01P mount with DJI O4 PRO Camera Transmission Module Mount TPU Insert

STEP 1 - Insert or slide the LOWER PLATE of PAVO35 in it by pushing and streching it hard from the side.

STEP 2 - Insert LIDAR and SCREW IT, close the lid and glue it.

STEP 3 - PUT DJI O4 Pro Transmission Module on the other side.
STEP 4 - connect wires and screw it.
STEP 5 - use landing soft pads to keep 4TH leg in place or use zip tie :)

DONE! EASY PEASY!

Just 100% PERFECT FIT!

(Scroll & Read Assembly Instructions at the bottom)

Give 5 Star Rating if you like it.

Design features :-
Ensures a perfect fit for the DJI O4 Pro module and MTF-01 or MTF-01P LIDAR.
Simple and secure fit: Requires no modifications.

Printing instructions -
Material: TPU
Infill: 60-70%
Print Quality - 0.2 - 0.1mm

Assembly instructions -
You might have to push screw on upper layer to increase size of the hole.

Included Files :-
1 STL file only

Printing instructions -
Material: TPU
Infill: 60-70%
Print Quality - 0.2 - 0.1mm