3D 模型描述
🪑 MiniMöbler Kallax-Inspired Furniture Bundle – 3 Scales (1:24, 1:18 & 1:12)
Bring modern Scandinavian style to your miniature interiors with this exclusive MiniMöbler furniture bundle, inspired by the iconic modular Kallax design. Perfect for dollhouses, dioramas, scale models, and interior photography sets.
This premium 3D-printable bundle includes 15 unique shelving units, each designed with clean geometry and true-to-life proportions for superior realism in your builds. Whether you’re creating a contemporary lounge, a stylish workspace, or a minimalist bedroom—MiniMöbler shelving adds instant character and charm.
📦 What’s Included:
15 Kallax-style shelf designs, including cube-style units, long sideboards, tall vertical storage, and compact variations
All models provided in three scales:
🔹 1:24 (Half scale)
🔹 1:18 (Playscale / Collectors scale)
🔹 1:12 (Standard dollhouse scale)
Print-ready STL files
Optimized for both FDM and resin printers
Cleaned mesh, watertight geometry, no supports required on most models
💡 Ideal For:
Modern miniature room designers
Dollhouse and diorama collectors
Toy photographers & set designers
Scale model hobbyists
DIY dollhouse customizers
🖨️ Print Notes:
These models have been tested with both PLA and resin printing. For best results, use a fine nozzle (0.2mm–0.4mm) and print at a moderate speed. No rafts or supports are necessary on most designs, but basic slicer orientation and supports may help on specific units depending on your printer setup.
3D 打印设置
🛠️ Printing & Manufacturing Instructions
Compatible Machines:
FDM (PLA, PETG, ABS recommended)
Resin printers (SLA/DLP/LCD)
Recommended Materials:
PLA for FDM: Easy to print, excellent detail for 1:18 and 1:24 scales
Resin for SLA/DLP: Ideal for sharp miniatures, especially at 1:24 scale
PETG optional for added durability
Printer Settings for FDM:
Nozzle: 0.4mm (0.2mm for finer details)
Layer height: 0.12–0.20mm
Infill: 10–15% (no load-bearing parts)
Supports: Not required on most models, optional for overhangs
Bed adhesion: Brim recommended for tall narrow parts
Printer Settings for Resin:
Layer height: 0.03–0.05mm
Normal exposure: 1.8–2.5s (depending on resin type)
Lift speed: 2–3mm/s
Base layers: 6–8 with 25–30s exposure
Assembly & Finishing Notes:
No assembly required: models print as single-piece furniture units
Light sanding recommended to remove layer lines (FDM)
Paint or weather using acrylic paints for realistic finishes
Optional: add custom decals or printed book textures for detail
Safety Notes:
Models intended for decorative use only
Not suitable for small children (choking hazard – small parts)
Not certified for food contact or mechanical use
