RK 62/62M 芬兰 AEG 复制品 by BENen3D

RK 62/62M Finnish AEG by BENen3D

These Valmet&Sako RK 62 and 62M (Modern) AEG Replica are Exclusively and Solely presented by BENen3D.

This is another AK platform/clone used by Finland, manufactured by Valmet and Sako.

It is the infantry weapon of the Finnish Defence Forces.

The RK62 M3 version is the modernized version of the initial RK 62.

This is a Complete Airsoft Replica 3D Printed, you only need AEG internals and hardwares.

Length 880-925mm, standard AK mags and internals.

2 types of handguards, receivers and stocks styles : Modern and older one

You will need to glue parts together.

Final rendering may vary depending on your Printer parameters and sanding/paintjob abilites.

Depending on your printer, some sanding may be necessary.

If you don't have printer, contact me on instagram or facebook @benen3d, or go to my esty : benen3d.etsy.com

Complete replicas ready-to-play available on my ETSY : benen3d.etsy.com

Hardware:

14mm CCW Flash Hider

Super Glue or Epoxy

M3 M4 M5 screws

M3 M4 M5 inserts

AK V3 Gearbox

AK Hop Hup and nub

450mm inner Barrel

11mm outer tube (9mm inner) for barrel strength.

AK fire selector

Lipo or NIMH battery

3/4/5mm pin

2 styles of grip/trigger guard are provided, so you can mount every grip you want.

You can also take the AK12 IAP grip if you want (IAP on cults)

For any questions, shoot a mail at benen3d@gmail.com.

The presentation of the kit, as well as the assembly tutorial will be there.

https://www.youtube.com/channel/UCXGd2E2K0BNTjDEx4niwC1w

For any questions, shoot a mail to benen3d@gmail.com or via instagram @benen3d.

You must ask before making any modifications!

FOR AIRSOFT USE ONLY !

Digital files are protected by COPYRIGHTs.

Unless contraindicated, all BENen3D creations are exclusively for Private and Personal use only.

Any modification, share, redistribution and/or use for economic or financial purposes is prohibited.

Enjoy.

Benoit MARQUIS

BEN in 3D

PayPal.Me/benen3d.

NO POLITICS !

Instructions:

220x220x250mm ready

Vertically

PLA+ or abs

barrel need to be made in 2 parts

Lower receiver fit an Ender 3

30% infill minimum

support enabled