Axial AXP8 Gilamon - Scale Dual Fan Radiator

Introducing another Axial AXP8 Gilamon accessory our - Scale Dual Fan Radiator - this scale off-road style dual fan radiator adds a great scale look to the back of your Gilamon. This can be used with our Scale Fuel Tank Receiver Box with the “Tank” version or by itself with the “Free-Standing” version.

Each dual fan radiator kit comes with:

• Radiator Base (Tank or Free-Standing versions)
• Fan Shroud
• Fan Blades
• Retainer Clip (to hold the radiator in place)

Scale dual fan radiator dimensions (with fans mounted):

99mm x 15mm x 40mm (LWH)

Measurements are approximate, add 1mm or 2mm to be safe for tight fits.

Hardware Required: 4 - M2 x 6mm, 2 - M3 x 12mm cap head, 2 - M3 x 8mm countersunk

Notes: If you will be using or will be using our Scale Fuel Tank Receiver Case then you want to print the “Tank” version; if you don’t plan on using the receiver case, you want to print the “Free-Standing” version. Both rad types are included in the file provided. Batteries are not included.

Installation:

Place the radiator onto the rear horizontal center bar and from the front of the vehicle screw in the two M3 x 8mm countersunk screws into the clip. The clip will sit inside an indent to help with keeping things in place. Tighten down the clip until the radiator no longer moves freely.

Don't have a printer and are still looking for your own scale dual fan radiator? Checkout my Etsy store - https://sbiprints.etsy.com/

Print the radiator with the "clip indent" side down; make sure to support this area as well (using "normal" supports). The fan shroud needs supports as well (I found "tree' did best). Lastly the blades also need supports (again I found "tree" did best).