Перейти к содержанию

Друзья, обращаем ваше внимание на то, что комментарии сообщества — не доска частных сообщений. Это публичное пространство для обсуждений и место обмена мнениями. Благодарим вас за то, что вы остаетесь вежливыми и уважаете других участников. Все коммерческие предложения или сообщения, представляющие угрозу, будут удаляться. Если вы упоминаете конкретный дизайн, пожалуйста, добавляйте ссылку или название работы в ваше сообщение. Так разговор будет более предметным. Если вы хотите добавить фотографии в свой пост, загружайте изображения на бесплатный онлайн-хостинг изображений, например Imgbb. После этого скопируйте ссылки на изображения и вставьте их в свой комментарий. Наслаждайтесь общением!

Напишите ваше сообщение:

38 комментариев

how I do to buy your aircraft now?

Hi, please visit my Discord for the latest updates: https://discord.gg/qVKgkgttDg. I have also replied to your email.

Hi there, would you consider working on a project with me? I'm trying to make an RC model version of your Antonov 225. Could do with someone who knows how to 3D model :)

Hi Clerx, I was hoping to buy your 747-100 model but now it seems most of your models have been taken down? Is there a way I can get your model please?

Hi, my paid models are temporarily unavailable. Please have a look on my Discord for more updates: https://discord.gg/qVKgkgttDg. If you require the 747-100 model urgenlty, you can send me a private message on Discord.

Hello, why are the 747-200 files missing. I need to buy him

Hi, my paid models are temporarily unavailable. Please have a look on my Discord for more updates: https://discord.gg/qVKgkgttDg

What happened to all of your models? I only see three of them now.

Hi, my paid models are temporarily unavailable. Please have a look on my Discord for more updates: https://discord.gg/qVKgkgttDg

Hello I have a question regarding putting the pin in the A220 fusealages. I increased the scale to 115% of everything and I can't figure out how the pin goes inside. Hopefully you can explain. Look forward to your response.

Hi, first insert the pin in the slot in one half of the fuselage, then connect the other half to the pin. If you have issues getting the fuselage halfs to fit, then you can try adjusting the scale of the pin. Hope this helps!

Hello Clerx, i would like to know if its possible to print the Concorde on a Prusa mini+, the print volume is 18x18x18cm. Thanks

Hi, unfortunately this won't be possible at 100% scale, the minimum required print volume is 12,6x12,6x19,2cm. You could print the model at a smaller scale (~90%) and glue the parts together.

I friend. Your model airplanes are the best. To day I bought your 747-100 and I was thinking if you could modify 2° level; only add windows to convert to 747-200. It's only difference between those airplanes. I´m apologise for my bad English.
I rate you 5 stars

  • 1 мне нравится

You are the best. Thanks


Are you the creator of the 1/100 A380 that was on here at one point? If so why was it discontinued? With thanks

Hi, I haven't created a model of the A380 yet.


What are you working on now?

Hi, I'm currently working on some more versions of the Boeing 747

  • 2 мне нравитсяs

Antonov An-225 Mriya, it is not possible to print Stabilizer Right and Stabilizer Left

Antonov An-225 Mriya

It is not possible to print Stabilizer Right and Stabilizer Left, if I analyze it in CURA (latest version), it tells me that the mesh is not solid and can print badly, in fact it happened, the Ender 3 S1 printer, stopped in the middle of printing and it gave the message that it is the end of the file (?), dear Clerk, do you have any idea what could be the problem?, I have already printed many parts of the model and I am missing the tail stabilizers and the wings, to tell you the truth I love it this plane and I don't want to throw everything away because I can't print these parts.

If you have any idea how to fix this I would really appreciate it.

I await your response, thank you for your attention.


Hi Richard, I printed this model myself using Cura 4.12.1 and an Ender 3 Pro and did not experience any issues. I also did not get any errors when slicing the stabilizers in Cura 5.0.0. Could you check you print settings (the default Cura 0.2mm profile should slice without issues)? Other issues could occur if you are not printing with a 0.4mm nozzle or are printing the files at a reduced scale. Perhaps you could also try generating your own supports for the stabilizers in Cura by using the version of the stabilizers without the build in supports that is included in the "additional content.zip" folder. Hope this helps!

  • 1 мне нравится

Hi, Your models are by far the nicest that I have seen. I would really like to have a 1/18th scale P-39 Airacobra to hang from my ceiling but all the models that I have downloaded are just not up to your standards. For the past few months I've been designing my own in Fusion 360 and all I've accomplished is the basic fuselage and wing shapes. It's a lot harder than it seems :-) Anyway if you could be persuaded to tackle this project I would be extremely grateful and would be willing to compensate you handsomely. I'm just looking for a nicely detailed model with the gear doors closed and no cockpit. I could even share my Fusion 360 project with you if that would help. Thank you, Gene

Hi, please submit your request here: https://forms.gle/CBnURBaFBoGPNW4t5, I'll review it when deciding which airplane to design next :)


Would it be possible to make the MD-11 with landing gear?

Kind regards,


Hi Sorin, I plan to update the MD-11 at some point but I can't make any promises on the new features or on when it will be released.

Good evening!

Since I´ve been a fan of your work for quite some time now and was always amazed by the quality and design of your blueprints, I wondering (and perhaps a few others on cults3d.com as well) whether you would be willing to make the Lockheed C-5 Galaxy or the Junkers Ju 52 - however you seem it fit. I´d feel honoured if you could make either of those and hope I am not sounding too demanding.

I would obviously be willing to compensate you for your work and effort.

Best regards,

Fabian Schragner

Hi Fabian, Thanks for your kind words! I really appreciate that you would be willing to compensate me for my efforts but I mainly look at the results of my poll (https://forms.gle/CBnURBaFBoGPNW4t5) when deciding which airplane to design next, so please submit the C-5 and Ju 52 there.

Thank you for this model.. Such an icon!

  • 1 мне нравится


  • 1 мне нравится

Hi. I lowe yours models :) a want to ask you, if i can buy planes models in another formats, bedt for me .sldprt and .sldasm.
Best regards

Hi, thanks! At this time I'm only providing my models in the .stl format.

Good Afternoon, is there any chance you could make a E195 fuselage, it has 30 windows with an emergency exit at window 13? All the rest is the same as E190

Hi, The E195 fuselage can be downloaded here: https://cults3d.com/en/3d-model/gadget/e195-fuselage

I am looking to get your Boeing 747-400 and scale it up to 1:100 scale. What is the biggest part to be printed and would it fit into a 210x210x180 mm print box if it's scaled up?

Unfortunately I don't think you'll be able to print it at 1:100 scale. The minimum required print volume at 1:144 scale is already is 81x110x180 mm, so you'll be limited by your Z-axis.

  • 1 мне нравится

Thank you!

Hi. What of the versions do you suggest regarding to where there's several options? Thank you.

I have also sent you a mail regarding some slicing issues with engine.

Hi, the different versions are mainly included to allow the model to be printed on smaller printers. But other than that, you can choose whichever option you prefer. I have also replied to your email.

Bonjours, je souhaiterai savoir si le dash 8 Q400 est modifiable facilement pour un novice ( fuselage creux et mettre des parties vitrées trensparentes. je souhaite le faire au 1/72, version sécurité civile Française. merci pour votre reponse.

Bonjour, il est possible d'imprimer le fuselage en creux mais je ne suis pas sûr qu'il sera possible d'enlever les hublots. Vous pouvez essayer cela avec un programme d'édition STL comme Autodesk Meshmixer ou essayer de les supprimer physiquement après l'impression.

(Google Translate)

would it not be possible to modify the E195-E2 for a 180x180x180 printing table?
If possible, I will buy your model.

Thanks in advance.

Hi, making such a modification would require quite a lot of time which I unfortunately don't have available at the moment.

Hello, I sent an email a few days back with a couple of questions, and I'm just following up. The manufacturers on Craftcloud are stating they can't print the files. Please let me know if I should resend my questions via email. Thank you!

Hi, unfortunately your email ended up in my spam folder but I have just sent you a reply.

Thanks for the great model. Are these files available in .STEP or .SLDPRT?

Hi, I only share the .STL files of my models.


For 747-400 model, is it possible to split RB211 engine models into engine and the connector separate? I want to use different layer colour print and this is only possible if the the two pieces can be separated from the single STL.


Hi, I have answered this question via email.

Hi brother, I want to manufacture and sell the Boeing 747 aircraft model from my printer.will you let me sell it?please

Hi, It it possible to buy a version of the 747 for commercial use. Please contact me via email for more info: clerx3d@outlook.com

  • 1 мне нравится

Hi there, my name is Evan Gradick from the United States, I'm voting for the models of the Boeing 707, Boeing 727, Boeing 737, Boeing 757, Boeing 767, 777, and the 787. I'm also voting for the models of the Airbus A330, A340, A350, A380, Lockheed L'1011, Tristar, Mcdonnell Douglas MD-80, and the Dassault Falcon 8X.