Calvin and Hobbes

Calvin and Hobbes, from the comic strip by Bill Watterson.

The comic strip Calvin and Hobbes follows the humorous antics of Calvin, a precocious, mischievous and adventurous six-year-old boy, and Hobbes, his sardonic stuffed tiger.

The full model is built using individual models of Calvin and Hobbes, therefore I created three separate Cults3D uploads:

For the final build using the individual Calvin and Hobbes models see:
https://cults3d.com/en/various/calvin-and-hobbes (this upload)

For the Calvin model see:
https://cults3d.com/en/various/calvin

For the Hobbes model see:
https://cults3d.com/en/various/hobbes

No supports are required. If you have the right filament colors, no painting is needed.

The fully completed model is 250mm tall after assembly.

Enjoy!

Print Settings

Printer:
FlashForge Creator X

Rafts:
No

Supports:
No

Resolution:
.2mm

Infill:
10%

Notes:
I used 3 bottom layers and 5 top layers

Building the model

Colors (there are no multiple printed pieces)
Brown:
log

Printing and assembly tips
1-No supports are required.
..
2-Be sure to use at least five top layers for the log for a clean finish.

Assembly tips:
-Build the Calvin model and Hobbes model using the Cults3D links provided in the introduction.
-The diagram in the pictures section will help in assembling the model and is quite straightforward.
-The model is meant to be glued together.