Angular guide for saw (band or oscillating)

This tool exists on ALIBABA at 25 $, but at this price the Belgian customs charges a VAT 21% on the price and the expenses of sending!!!!! then B-POST takes 15 € of expenses of file.

So I decided to print it, the most difficult thing is to find the aluminium profile that slides in the original groove.

For my saw it is a 20 x 10 mm aluminium U-profile, the height of 10 mm has been filed down to 7 mm.

The bolts or nuts under the profile are embedded in 2-component glue (green paste on the picture)

I added the nut holder for printing.

The two holes on the vertical part allow to screw a martyr or longer part.

I used a square head bolt M6, a bolt M5, 2 nuts and 2 washers...with the small ALU profile and the printing all comes back to less than 5 € :)

Small remark at the time of my personal impression: there was a power cut, I thus resumed the impression thereafter, but my printer shifted the axis Y has the resumption...or the small staircase...as it works well...pfffffff had not the courage to remake an impression.

Set the printing scale to 160 mm (the largest dimension), this implies a distance of at least 80 mm between the center and the blade. example: if the saw is 50 mm from the groove...set the scale to 100 mm, you will have to switch to M4 or 5 bolts

I put a STL and OBJ version and a very light price for all