PRINTABLE DeLorean DMC-12 - Back to the future- normal

Fully fixed car from Back to the future I - DeLorean DMC - 12
Fixed via MakePrintable
Recommend to print in 16% scale and with 20-30% infill with supports everywhere, but you can try different opinion too and let me know :)
Print on highest resolution and rotate it as on 2nd picture ! + If you are using cura, selest REMOVE ALL HOLES in MESH FIXES, if you don't turn it on, it will print car with interior and probably clogg your nozzle ! If you are using different slicer try to find similar option and then check it in layer view.
If you see holes or missing parts in slicer (i am using Cura) set -> Outer wall inset to - 0.4, MINUS 0.4 (If you are using 0.4mm nozzle, for example if you are using 0.2mm nozzle set it to -0.2)