Bionic frame 140mm with extra 25,5x25,5mm holes

Add extra 25,5mmm x 25,5mm holes for more FCO/AIO compatibility.

Also 3 inch version with only 20x20mm holes:
https://cults3d.com/en/3d-model/gadget/bionic-frame-140mm

5 inch version:
https://cults3d.com/en/3d-model/gadget/bionic-frame-225mm

Bionic frame 140mm, perfect for freestyle and racing drones. Created using generative design.
Tested couple of versions.
High durability, high stiffness, low mass.

True X,
140mm Wheelbase,
propeller 3 inch.
20 x 20mm and 25,5 x 25,5mm stack mount (enough high for ESC, FCO, VTX tower or AIO).
Mounting holes for motors: 2mm on wheelbase 9 - 12mm
Place for micro FPV camera (20mm) but also nano with adapter.

You will need two M3x35mm aluminium/nylon standoff with M3 screws.

Using 20% infill and 3 shells, PETG mass about 23 grams, and rigid.
Using 20% infill and 3 shells, PA12+CF mass about 27 grams, but then it's super rigid!

Download and print in some cool color, or if You are in Europe We can print it for You!
Just write on: kontakt@drzewniane.pl

Technology: FDM, SLS,
Supports: YES,
Material: PA12, PETG, PA12+CF
Shells: 3
Infill: 20%.