Перейти к содержанию

Imperial Gunner 3D Printable Helmet

?
Качество творения: 5,0/5 (2 голоса)
Оценка участников по печатаемости, полезности, уровню детализации, т.д.

Описание 3D-модели

Imperial Gunner - 3D Printable Helmet 3D print model

*Updated 19th Feb.
Dome parts 3 and for were reported not flat on the build plate. This is due to the bevel under the dome 3 and 4 which is where the visor is meant to go, my apologies for anyone who had issues printing it flat. I have updated Parts 3 and 4 to sit dead flat, they will require some supports due to the overhang, but they are dead flat now.

Please contact us if there is an issue with any parts or you need alternative cuts.

Designed specifically for 3D printing, why not add an Imperial Gunner Helmet to your collection! Comprising of 29 parts (plus optionals) This has also been scaled as close to 501st scale as possible, or within 1.5cm

*Note - The crisp sharp images you see in the instructions represent the actual models, they are not fancy render effects. All pieces are void of visible polygons, ready for a clean silky smooth print and are modelled in hi-res.

We have done everything for you!

All pieces are cut and repaired using a professional grade repairing tool, all pieces are placed dead flat at 0,0,0 on the build surface for you. We have tried very very hard to ensure all you need to do is load the file, select your settings and press print.

included is a comprehensive instructions for all parts (the assembly guide has been uploaded for your viewing)


Настройки 3D-печати

This suit is cut for a 20xcmx15cmx15cm build plate (ie Wanhao/CTC/Flashforge) but parts will fit on a 15x15x15cm plate, just oriented differently.

All parts can be cut again and if you require any assistance with cutting parts smaller OR you would like the full piece of a part (ie you would like the chest in one piece) as long as you have purchased the pack, like a piece of software or hardware, we will support you on it regardless - as many edits as you require - from printing to finishing.

SUGGESTED PRINT SETTINGS:

LAYER HEIGHT:
Since parts will be sanded and painted, we suggest 0.2-0.3mm layer height.

INFILL:
We suggest a 3-10% infill rate to keep the weight of the parts down. A full suit can be quite heavy if given too much infill.

Supports / Rafts
This is really up to you and your printer. These days printers with great cooling can perform some serious overhangs, it's going to come down to you knowing your printer and how what it's capable of. Please ask us a message in the comments if you would like to know more.

Информация файла 3D-принтера

  • Формат 3D-дизайна: STL Детали папки Закрыть
    • Hex3D_ImpGunner_Aerial.stl
    • Hex3D_ImpGunner_Dome_Part1.stl
    • Hex3D_ImpGunner_Dome_Part2.stl
    • Hex3D_ImpGunner_Dome_Part3.stl
    • Hex3D_ImpGunner_Dome_Part4.stl
    • Hex3D_ImpGunner_Dome_Part5.stl
    • Hex3D_ImpGunner_Dome_Part6.stl
    • Hex3D_ImpGunner_Dome_Part7.stl
    • Hex3D_ImpGunner_Dome_Part8.stl
    • Hex3D_ImpGunner_Dummy_Visor.stl
    • Hex3D_ImpGunner_Jaw_Part1.stl
    • Hex3D_ImpGunner_Jaw_Part2.stl
    • Hex3D_ImpGunner_Jaw_Part3.stl
    • Hex3D_ImpGunner_Jaw_Part4.stl
    • Hex3D_ImpGunner_Jaw_Part5.stl
    • Hex3D_ImpGunner_Jaw_Part6.stl
    • Hex3D_ImpGunner_Jaw_Part7.stl
    • Hex3D_ImpGunner_Jaw_Part8.stl
    • Hex3D_ImpGunner_Left_Back_Rivet.stl
    • Hex3D_ImpGunner_Left_Front_Rivet.stl
    • Hex3D_ImpGunner_Right_Back_Rivet.stl
    • Hex3D_ImpGunner_Right_Front_Rivet.stl
    • Hex3D_ImpGunner_RivetCaps.stl
    • Hex3D_ImpGunner_Scoop_Part1.stl
    • Hex3D_ImpGunner_Scoop_Part2.stl
    • Hex3D_ImpGunner_Scoop_Part3.stl
    • Hex3D_ImpGunner_Scoop_Part4.stl
    • Hex3D_ImpGunner_Scoop_Part5.stl
    • Hex3D_ImpGunner_Scoop_Part6.stl
    • Hex3D_ImpGunner_Scoop_Part7.stl
    • Hex3D_ImpGunner_Scoop_Part8.stl

    Узнайте больше о форматах

  • Последнее обновление: 2017-04-12 18:08
  • Дата публикации: 2017-04-09 13:27

Авторское право

©

Автор

Дизайна 183
Загрузки 104,6k
Сделки по продаже 6 311,20 US$
Понравившийся дизайн 1 Подписчики 2,1k

Thanks for downloading, If you enjoy my models here, I guarantee you'll love the ones on my Patreon! :)
https://www.patreon.com/Geoffro

Страница переведена при помощи машинного перевода. Ознакомиться с исходным текстом
Проблема с работой? Сообщить о проблеме

Бестселлеры категории Fashion


Добавить комментарий

5 комментариев


Вы хотите поддержать Cults?

Вам нравятся Cults и вы хотите помочь нам продолжить наш путь самостоятельно? Обратите внимание, что мы — маленькая команда из 3 человек, поэтому поддержать нас в поддержании деятельности и создании будущих разработок очень просто. Вот 4 решения, доступные для всех:

  • РЕКЛАМА: Отключайте блокировщик баннеров AdBlock и кликайте на наши рекламные баннеры.

  • АФФИЛИАЦИЯ: Совершайте покупки онлайн, переходя по нашим партнерским ссылкам здесь Amazon.

  • ДОНАТЫ: Если хотите, то можно сделать пожертвование через PayPal здесь.

  • *ПРИГЛАШЕНИЕ ДРУЗЕЙ: * Приглашайте своих друзей, откройте для себя платформу и великолепные 3D-файлы, которыми делится сообщество!