Spiral pattern lampshade

Beautiful spiral patterns lampshade inspired by formaliz3d designs.

• Perfectly suitable for a standard E27 lightbulb (110mm height x 60mm wide).

• Works with most sockets.

• Can be printed in both ABS and PLA (that's what we printed with). Check the images for the correct print position.

• The top screw is a M9 or a M10, depending on your needs

• You can print it in any filament color and spray paint it afterwards (that's what we did, anyway)

• Check the attached image for dimensions. If you need a different size to fit the light socket or the bulb, just drop a message or post a comment.

Not for re-uploading or commercial use.

The zip file has 5 stl files:

M9_screw.stl / M10_screw.stl
.1 mm layer height
30% infill
no support
0.586/0.637 meters of filament ~ 1.76g/1.91g
about 1h 30 minutes @ 3000mm/s

socket_top_cover.stl
.2 layer height
30% infill
no support
1 meter of filament ~ 3.07g
about 20 minutes @ 3000mm/s

lamp_shade_top.stl
.3mm layer height
no infill
no support
3.131 meters of filament ~ 9.42g
about 1h 20 minutes @ 3000mm/s

lamp_shade_bottom.stl
.3mm layer height
no infill
no support
12 meters of filament ~ 36.21g
about 4h 25 minutes @ 3000mm/s