Paris, Trocadero, Eiffel Tower

Impression of a part of Paris, the Trocadero where the Eiffel Tower is located, a district crossed by the Seine. You can clearly see the strong topography in front of the Eiffel Tower.

Putting the model with a setting of about 100mmx100m you with a fragment of a square kilometer at 1/5000th with the topography. The buildings and bridges are close to reality.

If the print is white, once in backlight (light or window) it will give a negative map of the city! (with the topo)

On the last pictures we see other models with other cities available on my profile!

On the last two, we see the direct comparison between Paris and Manhattan, impressive when we know that the density is the same, about as many inhabitants on both prints!

Be careful to print as accurately as possible!

On the pictures, with a layer height of 0.12mm and a 0.4mm nozzle. Even better with a 0.2mm nozzle.

No need for support but infill at 100% to not see the grid appear, there is very little infill so it's not very consuming.

Once printed, chances are you'll have to remove quite a bit of stringing even if this model isn't too prone to it.