Punho de torneira de cerveja - Modelo Hop

I printed four of these. One in bronze fill filament, one in dark wood fill, and two in light wood fill filament. I pronted in two colors, with a logo inset in the front using the same color as I used for each thread piece.

For the bronze version, I just sandpapered it and finished it by polishing it using a Dremel tool. The wood versions were sandpapered down to 2500 grit, then did three layers of wood stain, and two layers of varnish.

The threads are printed in PolyTerra PLA, and Fillamentum Pearl Ruby Red PLA.

As I didn’t have enough space for all handles, I had to extend the thread part to have the handles staggered.