241件のコメント

You can download the files again.

I will take a look at it.

Thanks for the tip. It should be printable now.

Dont understand what you mean? do I have to download the file again?

Hola, no te lo puedo decir. No tengo un Trex 500, así que no sé sus dimensiones.

I have two versions of the H-145-T2. One in STEP format for CAD programs, and one that's ready for 3D printing. I can see in your profile that you downloaded the STEP version.
You can't 3D print this one without additional work, and you'll need Fusion360 to load it. If that's what you wanted.

Thank you for your answer. I would like to print it. So I think I bought the wrong file. I bought it twice (the first for H145 and the second I thought it was a EC145 due to the picture but it is a H145). Can we solve this pb together ?

The EC-145 is the old and H-145 is just the new designation.
If you bought it twice, the CAD version and the printable version, then it is the same helicopter.

I would be very happy to buy your design of such a propeller.

Czy twój projekt Airwolfa będzie pasował do silnika i elektroniki z Bell 206 V3 ?

Will your Airwolf design fit the engine and electronics from the Bell 206 V3?

I can't design anything for this model because I don't have this helicopter.
That's why I can't tell you whether the mechanism from this Bell fits into the Airwolf.

Hello, has you Eurofighter the additional cheat holes bottom of the fuselage?

Cześć, proszę powiedz mi, o jakim modelu mówisz?

Eraser38
Witam.
Czy do modelu Airwolf będzie pasował silnik i cała elektronika od Bell 206 V3. Czy będę go mógł wydrukować na drukarce Bambu Lab Mini. Stół 180x180 mm?
Jestem zainteresowany zakupem.

Hello. Will the engine and all the electronics from the Bell 206 V3 fit the Airwolf model? Will I be able to print it on a Bambu Lab Mini printer? Bed 180x180 mm? I am interested in purchasing.

Witam.
Czy to tego modelu będzie pasował silnik i cała elektronika od Bell 206 V3. Czy będę go mógł wydrukować na drukarce Bambu Lab Mini. Stół 180x180 mm?
Jestem zainteresowany zakupem.

Hello. Will the engine and all the electronics from the Bell 206 V3 fit this model? Will I be able to print it on a Bambu Lab Mini printer? Bed 180x180 mm? I am interested in purchasing.

Hello, all the design programs differ in their tools. Therefore, the program I use doesn't work significantly better than Fusion360.
What I designed can also be drawn in Fusion360.
Please don't be mad at me, but I won't publish the entire design of the SU-27 as a step file. It's too much work, and unfortunately and I have to play along with our system.

Nice. It looks very good.

Thanks.I created the corresponding CAD files for the landing gear. The tubes are made of carbon, but the ends that serve as mounts are either turned from aluminum or, like the nose gear, the wheel mount, CNC-milled from aluminum. Additionally, the fork tubes contain not just springs, but actual hydraulic dampers, similar to those used in kitchen cabinets, for damping cabinet doors.
So, nothing just printed. That's why I haven't published them as templates.

Hello, no. this is only the helicopter fuselage. The cockpit is an extra parts.

Hello, yes it works fine. I use carbon-nylon to print the parts.

Does it also work with ABS? I do not have the carbon-nylon filament.. Is the main rotor hub also printed? In the videos it looks black plastic like the original. Thanks!

Hello, I designed the Piccolo because I still had some spare parts, but no more to assemble a complete one. So I reverse-engineered the parts until I had built the complete helicopter with the modifications.
I then printed the missing parts with regular PLA. This means that some parts are still original, but only a very few. However, since PLA ages and becomes more brittle, I wouldn't print the parts in PLA today. That's why I printed some blue parts that I had already printed in ABS back then. I would print the white parts in carbon nylon today.
It's easy to print and somewhat flexible without breaking, and it's more durable. I would print the smaller parts in regular ABS, as you can simply print them with a 0.2mm nozzle, which isn't possible with carbon nylon.

With this.
https://www.ebay.de/itm/286458115947

Which parts are you interested in?

The pilot and cockpit interior

Please send me an Email to dreagon2019@gmx.de

I use 4s, 1500mah or 4s,3300mah so far.

thank you , i'll send new some news when it will fly .

Thanks for you nice design. My edf is not excatly the same as yours. Could you share with me the step file to modify it with onshape ?

Hello, i have added the STEP version to download.

Thank you so mutch !!

Please don't be mad at me, but as you can see, this machine is breathtaking, and that's only because over half a year of work went into it, which is why it looks so detailed and accurate.
Once you build it, you'll see that it's worth the price.

Thanks, and the H-145 doesn't have landing gear, but rather skids.
You can find these in the /PLA, PETG, ABS/Nozzle_0.4 folder.

Thanks. :-)

sorry I for got to mention the canopy for the SU 27 I cannot fine the file for it

Thank you.
The part Rumpf_01 is in the folder "PLA_Nozzle_0.4mm 10% Infill 2Walls".

Ein Landegestell hat der Airwolf nicht, sondern ein Fahrwerk und die Teile sind mit dabei.
Ich weiß nur nicht, was du mit Halter für die Silentblöcke meinst.

Hello, unfortunately, I don't have any 500-size helicopters.
But you can adjust the fuselage to your scale.

Yes, I have the version without the Fenestron, but it's not ready to print yet. When I next design a BO-105 for 3D printing, I'll add an intermediate gearbox, which I'll also use for the H-145. Once I've designed that, I can also create the H-145 with a standard tail for 3D printing. This will probably happen sometime this year.